HH3C-QINQ-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
23

hh3cQinQBpduTunnelTable

table
.1.3.6.1.4.1.25506.2.69.1.2 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQBpduTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQBpduTunnelTable' 
A table for configuring 802.1q BPDU tunnel function
for interfaces.
hh3cQinQBpduTunnelEntry row .1.3.6.1.4.1.25506.2.69.1.2.1
An entry for configuring 802.1q BPDU tunnel function
for interfaces.
Indexes
Column Syntax OID
hh3cQinQProtocolIndex
The index of protocol on which the BPDU tunnel state
will be set. 'bpdu' represents status of BPDU tunnel.
'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC
tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGM…
Enumeration
Enumerated Values:
1bpdu
2stp
3gmosaic
4igmp
 .1.3.6.1.4.1.25506.2.69.1.2.1.1
hh3cQinQBpduRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.2.1.2

hh3cQinQPriorityRemarkTable

table
.1.3.6.1.4.1.25506.2.69.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQPriorityRemarkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQPriorityRemarkTable' 
A table for configuring priority field in 802.1Q-in-Q
outer VLAN tag for interfaces. This feature uses the
priority of an inner VLAN tag to remark the priority
of an outer VLAN tag.
hh3cQinQPriorityRemarkEntry row .1.3.6.1.4.1.25506.2.69.1.3.1
An entry for configuring priority remark function for
interfaces.
Indexes
Column Syntax OID
hh3cQinQPriorityValue
The priority value in inner VLAN tag. Since the priority
range is from 0 to 7, yet the index range is from 1 to 8.
Thus, the actual priority value equals to the value that
subtracts 1 from corresponding index value.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25506.2.69.1.3.1.1
hh3cQinQPriorityRemarkValue
The new priority value used to fill outer tag.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.25506.2.69.1.3.1.2
hh3cQinQPriorityRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.3.1.3

hh3cQinQVidTable

table
.1.3.6.1.4.1.25506.2.69.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQVidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQVidTable' 
A table for configuring VLAN ID of the 802.1Q-in-Q
interfaces.
hh3cQinQVidEntry row .1.3.6.1.4.1.25506.2.69.1.4.1
An entry for configuring VLAN ID of the 802.1Q-in-Q
interfaces.
Indexes
Column Syntax OID
hh3cQinQVlanID
VLAN ID
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.25506.2.69.1.4.1.1
hh3cQinQInboundVidListLow
The inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 1 to
2048. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, with
…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.69.1.4.1.2
hh3cQinQInboundVidListHigh
The inbound VLAN IDs which need 802.1Q-in-Q processing.
The VLAN ID range, described by bitmap, is from 2049 to
4094. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs, wi…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.69.1.4.1.3
hh3cQinQVidEthernetType
Ethernet protocol type configuring for a VLAN.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.69.1.4.1.4
hh3cQinQVidRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.4.1.5

hh3cQinQVidSwapTable

table
.1.3.6.1.4.1.25506.2.69.1.5 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQVidSwapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQVidSwapTable' 
A table for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces.
hh3cQinQVidSwapEntry row .1.3.6.1.4.1.25506.2.69.1.5.1
An entry for configuring 802.1Q-in-Q inner VLAN ID
swapping function for interfaces.
Indexes
Column Syntax OID
hh3cQinQVidSwapOld
The old VLAN ID of original 802.1Q packets.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.25506.2.69.1.5.1.1
hh3cQinQVidSwapNew
The new VLAN ID of original 802.1Q packets.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.25506.2.69.1.5.1.2
hh3cQinQVidSwapRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.5.1.3

hh3cQinQPrioritySwapTable

table
.1.3.6.1.4.1.25506.2.69.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQPrioritySwapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQPrioritySwapTable' 
A table for configuring 802.1Q-in-Q inner VLAN priority
swapping function for interfaces. Using this function,
the priority of inner VLAN tag can be modified.
hh3cQinQPrioritySwapEntry row .1.3.6.1.4.1.25506.2.69.1.6.1
An entry for configuring 802.1Q-in-Q inner VLAN
priority swapping function for interfaces.
Indexes
Column Syntax OID
hh3cQinQPrioritySwapOld
The old priority of original 802.1Q packets. It is the
priority of inner VLAN tag. Since the VLAN priority range
is from 0 to 7, yet the index range is from 1 to 8. Thus,
the actual priority value equals to the value th…
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25506.2.69.1.6.1.1
hh3cQinQPrioritySwapNew
The new priority of original 802.1Q packets. It is the
priority of inner VLAN tag after swapped.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.25506.2.69.1.6.1.2
hh3cQinQPrioritySwapRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.6.1.3

hh3cQinQIfConfigTable

table
.1.3.6.1.4.1.25506.2.69.1.7 · 1 row entry · 7 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cQinQIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-QINQ-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-QINQ-MIB::hh3cQinQIfConfigTable' 
A table for configuring 802.1Q-in-Q functions for
interfaces.
hh3cQinQIfConfigEntry row .1.3.6.1.4.1.25506.2.69.1.7.1
An entry for configuring 802.1Q-in-Q functions for
interfaces.
Indexes
Column Syntax OID
hh3cQinQIfEthernetType
Ethernet protocol type configuring for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.69.1.7.1.1
hh3cQinQIfSwitch
Switch of 802.1Q-in-Q functions configuring for an
interface.
Hh3cQinQSwitchStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.2.69.1.7.1.2
hh3cQinQIfRowStatus
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.69.1.7.1.3
hh3cQinQIfServiceTPIDValue
Service TPID value configured for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.69.1.7.1.4
hh3cQinQIfCustomerTPIDValue
Customer TPID value configured for an interface.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.25506.2.69.1.7.1.5
hh3cQinQIfUplinkSwitch
Switch of the uplink 802.1Q-in-Q function
for an interface.
Hh3cQinQSwitchStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.2.69.1.7.1.6
hh3cQinQIfDownlinkSwitch
Switch of the downlink 802.1Q-in-Q function
for an interface.
Hh3cQinQSwitchStater/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.2.69.1.7.1.7