HH3C-PPP-OVER-SONET-MIB

        This MIB manages POS(PPP Over Sonet)interfaces by providing
an operational table which controls parameters of each POS
interface and reports alarm conditions.
    
Source file
HH3C-PPP-OVER-SONET-MIB
Last revised
Identity
hh3cPos
Base OID
1.3.6.1.4.1.25506.2.19
Imported Objects
HH3C-OID-MIB hh3cCommon
IF-MIB ifDescr ifIndex
SNMPv2-SMI Counter64 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TruthValue
Net-SNMP examples using the hh3c MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HH3C-PPP-OVER-SONET-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HH3C-PPP-OVER-SONET-MIB::hh3cPos'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PPP-OVER-SONET-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PPP-OVER-SONET-MIB::hh3cPos'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
.1.3.6.1.4.1.25506.2.19
.1.3.6.1.4.1.25506.2.19.1
.1.3.6.1.4.1.25506.2.19.1.1
.1.3.6.1.4.1.25506.2.19.1.1.1
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.1
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.10
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.11
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.12
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.13
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.14
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.15
.1.3.6.1.4.1.25506.2.19.1.1.1.16
.1.3.6.1.4.1.25506.2.19.1.1.1.17
.1.3.6.1.4.1.25506.2.19.1.1.1.18
.1.3.6.1.4.1.25506.2.19.1.1.1.19
.1.3.6.1.4.1.25506.2.19.1.1.1.2
.1.3.6.1.4.1.25506.2.19.1.1.1.20
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.21
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.22
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.23
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.24
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.25
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.26
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.27
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.28
.1.3.6.1.4.1.25506.2.19.1.1.1.3
Enumeration
.1.3.6.1.4.1.25506.2.19.1.1.1.4
OctetString
.1.3.6.1.4.1.25506.2.19.1.1.1.5
OctetString
.1.3.6.1.4.1.25506.2.19.1.1.1.6
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.7
OctetString
.1.3.6.1.4.1.25506.2.19.1.1.1.8
Integer32
.1.3.6.1.4.1.25506.2.19.1.1.1.9
.1.3.6.1.4.1.25506.2.19.2
.1.3.6.1.4.1.25506.2.19.2.0
Dependencies (8) 4 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (17)
NameOIDDescription
.1.3.6.1.4.1.25506.2.19.2.0.1
Alarm indicates loss of signal
.1.3.6.1.4.1.25506.2.19.2.0.10
Alarm indicates inconsistency between sent and received J1 bytes.
.1.3.6.1.4.1.25506.2.19.2.0.11
Alarm indicates a mismatched C2 byte.
.1.3.6.1.4.1.25506.2.19.2.0.12
Alarm indicates that the B2 bit-error rate exceeds SD threshold.
.1.3.6.1.4.1.25506.2.19.2.0.13
Alarm indicates that the B2 bit-error rate exceeds SF threshold.
.1.3.6.1.4.1.25506.2.19.2.0.14
Alarm indicates that the Pos interface state returns normal.
.1.3.6.1.4.1.25506.2.19.2.0.15
Threshold crossing alarms for B1.
.1.3.6.1.4.1.25506.2.19.2.0.16
Threshold crossing alarms for B2.
.1.3.6.1.4.1.25506.2.19.2.0.17
Threshold crossing alarms for B3.
.1.3.6.1.4.1.25506.2.19.2.0.2
Alarm indicates loss of frame
.1.3.6.1.4.1.25506.2.19.2.0.3
Alarm indicates out of frame
.1.3.6.1.4.1.25506.2.19.2.0.4
Alarm when LAIS(Line Alarm Indication Signal) arrives
.1.3.6.1.4.1.25506.2.19.2.0.5
Alarm when LRDI(Line Remote Defect Indication) arrives
.1.3.6.1.4.1.25506.2.19.2.0.6
Alarm when PRDI(Path Remote Defect Indication) arrives
.1.3.6.1.4.1.25506.2.19.2.0.7
Alarm when PAIS(Path Alarm Indication Signal) arrives
.1.3.6.1.4.1.25506.2.19.2.0.8
Alarm indicates loss of pointer
.1.3.6.1.4.1.25506.2.19.2.0.9
Alarm indicates inconsistency between sent and received J0 bytes.