HH3C-POS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
36

hh3cposAppTable

table
.1.3.6.1.4.1.25506.8.36.8.1 · 1 row entry · 15 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposAppTable' 
The table to get and set the application informatin.
hh3cposAppEntry row .1.3.6.1.4.1.25506.8.36.8.1.1
The content of hh3cposAppTable.
Indexes
Column Syntax OID
hh3cposAppId
The ID of application.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.8.36.8.1.1.1
hh3cposAppConnectMode
The connect mode of application.

If the router and unix are connected by TCP protocol,
the connect mode of application is tcp.

If the router and unix are connected by async interface,
the …
Enumerationr/w
Enumerated Values:
1tcp
2flow
3pad
 .1.3.6.1.4.1.25506.8.36.8.1.1.2
hh3cposAppState
The state of application.
Enumeration
Enumerated Values:
1noset
2down
3up
4ok
5kept
6linking
7linked
 .1.3.6.1.4.1.25506.8.36.8.1.1.3
hh3cposAppIfIndex
The interface index of the application
whose connect mode is flow or pad.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.8.36.8.1.1.4
hh3cposAppHostIP
The destination IP Address of application.
Used for the application whose connect mode is tcp.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.36.8.1.1.5
hh3cposAppPort
The destination port of application.
Used for the application whose connect mode is tcp.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.8.36.8.1.1.6
hh3cposAppSourceIp
The source IP Address of application.
Used for the application whose connect mode is tcp.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.25506.8.36.8.1.1.7
hh3cposAppRecvPacCounter
The number of packets received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.1.1.8
hh3cposAppErrPacCounter
The number of error packets received by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.1.1.9
hh3cposAppDistrErrCounter
The number of packets that could not be sent to POS.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.1.1.10
hh3cposAppBuffedCounter
The number of packets stored in the buffer of application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.1.1.11
hh3cposAppDiscardedCounter
The number of packets discarded by the application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.1.1.12
hh3cposAppDebug
The debugging switch of application.
Enumerationr/w
Enumerated Values:
1close
2open
 .1.3.6.1.4.1.25506.8.36.8.1.1.13
hh3cposAppRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.36.8.1.1.14
hh3cposAppX121Addr
The destination X121 Address of application which is
an octet string made up of numeric.
Used for the application whose connect mode is pad.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.25506.8.36.8.1.1.15

hh3cposInterTable

table
.1.3.6.1.4.1.25506.8.36.8.2 · 1 row entry · 11 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposInterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposInterTable' 
The table to get and set the POS-Interface informatin.
hh3cposInterEntry row .1.3.6.1.4.1.25506.8.36.8.2.1
The content of hh3cposInterTable.
Indexes
Column Syntax OID
hh3cposPosId
The ID of the POS-Interface.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.8.36.8.2.1.1
hh3cposPosIfIndex
The interface index of the POS-Interface whose type is fcm, asy or pad-client.
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.8.36.8.2.1.2
hh3cposPosConnectState
The state of the POS-Interface.
Enumeration
Enumerated Values:
1noset
2down
3up
4ok
 .1.3.6.1.4.1.25506.8.36.8.2.1.3
hh3cposPosRecvPacCounter
The number of packets received by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.2.1.4
hh3cposPosErrPacCounter
The number of error packets received by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.2.1.5
hh3cposPosMapErrCounter
The number of packets that could not be sent to application.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.2.1.6
hh3cposPosBuffedCounter
The number of packets stored in the buffer of the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.2.1.7
hh3cposPosDiscardedCounter
The number of packets discarded by the POS-Interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.2.1.8
hh3cposPosInterDebug
The debugging switch of the POS-Interface.
Enumerationr/w
Enumerated Values:
1close
2open
 .1.3.6.1.4.1.25506.8.36.8.2.1.9
hh3cposPosInterRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.36.8.2.1.10
hh3cposPosInterType
The type of interface.

The POS-Access mode has four types: FCM-Access, ASYNC-Access,
simulating POSPAD device, POSPAD-Access.

FCM-Access mode means POS and router are connected through PS…
Enumerationr/w
Enumerated Values:
1fcm
2asy
3pad-client
4pad-server
 .1.3.6.1.4.1.25506.8.36.8.2.1.11

hh3cposMapTable

table
.1.3.6.1.4.1.25506.8.36.8.3 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposMapTable' 
The table to get and set the informatin of mapping relation of destination and application.
hh3cposMapEntry row .1.3.6.1.4.1.25506.8.36.8.3.1
The content of hh3cposMapTable.
Indexes
Column Syntax OID
hh3cposMapDes
The destination code of the mapping item.
If the value is -1, it is the default item of mapping relation.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.25506.8.36.8.3.1.1
hh3cposMapAppNumber
The application index of the mapping item.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.8.36.8.3.1.2
hh3cposMapRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.36.8.3.1.3

hh3cposAsyAppTable

table
.1.3.6.1.4.1.25506.8.36.8.4 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposAsyAppTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposAsyAppTable' 
The table to get and set the asynchronous-application interface information.
hh3cposAsyAppEntry row .1.3.6.1.4.1.25506.8.36.8.4.1
The content of hh3cposAsyAppTable.
Indexes
Column Syntax OID
hh3cposAsyAppIfIndex
The interface index of asynchronous-application.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.8.36.8.4.1.1
hh3cposAsyAppRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.36.8.4.1.2

hh3cposFCMTable

table
.1.3.6.1.4.1.25506.8.36.8.5 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposFCMTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposFCMTable' 
The table to get the information of FCM interface.
hh3cposFCMEntry row .1.3.6.1.4.1.25506.8.36.8.5.1
The content of hh3cposFCMTable.
Indexes
Column Syntax OID
hh3cposFCMIfIndex
The index of FCM interface.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.8.36.8.5.1.1
hh3cposFCMTimeoutCounter
The number that modem was hung up for timeout.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.5.1.3
hh3cposFCMConnectFailCounter
The number that modem could not handshake successfully.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.8.36.8.5.1.4

hh3cposPadTable

table
.1.3.6.1.4.1.25506.8.36.8.22 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cposPadTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-POS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-POS-MIB::hh3cposPadTable' 
The table to enable or disable POSPAD-Access function under serial interface.
hh3cposPadEntry row .1.3.6.1.4.1.25506.8.36.8.22.1
The content of hh3cposPadTable.
Indexes
Column Syntax OID
hh3cposPadIfIndex
The index of serial interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.8.36.8.22.1.1
hh3cposPadRowStatus
The status of row. Only support active, CreateAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.8.36.8.22.1.2