HH3C-PBR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
48

hh3cPBRMibPolicyNodeTable

table
.1.3.6.1.4.1.25506.2.113.2.1 · 1 row entry · 19 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibPolicyNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibPolicyNodeTable' 
A table for PBR nodes.
hh3cPBRMibPolicyNodeEntry row .1.3.6.1.4.1.25506.2.113.2.1.1
An entry for PBR nodes.
Indexes
Column Syntax OID
hh3cPBRMibPolicyNodeAddrType
Address type of policy node, which can be IPv4 or IPv6, Dual-stack.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.113.2.1.1.1
hh3cPBRMibPolicyName
Policy name of PBR node.
OctetString
Constraints:
range: 1-19
 .1.3.6.1.4.1.25506.2.113.2.1.1.2
hh3cPBRMibPolicyNodeId
Sequence identifier of PBR node.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.113.2.1.1.3
hh3cPBRMibPolicyNodeMode
Mode of PBR node. If the mode of a node is marked as true,
the packets that meet the matching rules are processed by
action rules in the node. If the mode of a node is marked as
false, the packets that meet the matchi…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.4
hh3cPBRMibPolicyNodeRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.113.2.1.1.5
hh3cPBRMibMinPktLen
Specifies the minimum IP packet length in the range of 1 and 65535.
Value 0 indicates that this rule is not set.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.1.1.6
hh3cPBRMibMaxPktLen
Specifies the maximum IP packet length in the range of 1 and 65535.
The maximum length must be no less than the minimum length.
The maximum and the minimum lengths must be both configured.
Value 0 indicates that this ru…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.1.1.7
hh3cPBRMibQosId
Specifies a local Quality of Service(QoS) ID in the range of 1 and 4095.
Value 0 indicates that this rule is not set.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.1.1.8
hh3cPBRMibQosIdMode
The mode of the QoS Local ID.
The default value is normal.
Enumerationr/w
Enumerated Values:
1invalid
2normal
3qppb
 .1.3.6.1.4.1.25506.2.113.2.1.1.9
hh3cPBRMibVxlanId
Specifies a VXLAN ID in the range of 0 to 16777215.
Value -1 indicates that this rule is not set.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.1.1.10
hh3cPBRMibDescription
A description for a policy node.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.25506.2.113.2.1.1.11
hh3cPBRMibApplyContinue
Use apply continue to compare packets
with the next policy node upon failure on the current node.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.12
hh3cPBRMibApplyFailDropNextHop
Configure the policy node to drop matching packets when
the next hop is invalid. If no next hops are specified
on the policy node, this command drops all packets that
match the node. Value FALSE indicates that this act…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.13
hh3cPBRMibApplyIpDf
Sets the Don't Fragment(DF) bit in the IP header of
matching packets. The value can be 0 or 1.
Value -1 indicates that this action is not set.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.1.1.14
hh3cPBRMibApplyLoadShareNextHop
Enables load sharing among multiple next hops.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.15
hh3cPBRMibApplyLoadShareOutIf
Enables load sharing among multiple output interfaces.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.16
hh3cPBRMibApplyLSDefaultNextHop
Enables load sharing among multiple default next hops.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.17
hh3cPBRMibApplyLSDefaultOutIf
Enables load sharing among multiple default output interfaces.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.18
hh3cPBRMibApplyStatisticsValue
Use apply statistics to enable match counting on a policy node.
Value FALSE indicates that this action is not set.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.1.1.19

hh3cPBRMibIfPolicyTable

table
.1.3.6.1.4.1.25506.2.113.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibIfPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibIfPolicyTable' 
A table for interfaces being applied with PBR
nodes with the same policy name.
hh3cPBRMibIfPolicyEntry row .1.3.6.1.4.1.25506.2.113.2.2.1
An entry for reference relation between interface and policy
nodes.
Indexes
Column Syntax OID
hh3cPBRMibPolicyAddressType
Address type of policy node, which can be
IPv4 or IPv6, Dual-stack.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.113.2.2.1.1
hh3cPBRMibAppliedPolicyName
Policy name of PBR nodes.
OctetStringr/w
Constraints:
range: 1-19
 .1.3.6.1.4.1.25506.2.113.2.2.1.2
hh3cPBRMibIfPolicyRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.113.2.2.1.3
hh3cPBRMibIfPolicyShareMode
Applies the policy in resource sharing mode.
In this mode, all interfaces on an interface card
with the same policy applied share one hardware resource.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.2.1.4

hh3cPBRMibMatchAclTable

table
.1.3.6.1.4.1.25506.2.113.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibMatchAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibMatchAclTable' 
A table for ACLs being used by a policy node.  Only one ACL
can be used within a node at most.
hh3cPBRMibMatchAclEntry row .1.3.6.1.4.1.25506.2.113.2.3.1
An entry for policy node that uses an ACL group as its
if-match rule.
Indexes
Column Syntax OID
hh3cPBRMibAclGroupId
Index of number-acl group.
Setting -1 indicates closing this rule.
When ACLName is configured with a valid value,
value -1 will be returned for ACLNumber.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.3.1.1
hh3cPBRMibAclGroupName
ACL match criterion by name. The ACL name must start with
letter a to z or A to Z. The ACL name cannot be all in
any combination of upper-case and lower-case letters.
To delete an ACL match criterion, you must configur…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.25506.2.113.2.3.1.2
hh3cPBRMibAclGroupVersion
The type of the ACL.
The hh3cPBRMibAclGroupVersion can only be configured
when the policy node type is Dual-stack, and cannot be empty.
Enumerationr/w
Enumerated Values:
1invalid
2ipv4
3ipv6
4userdefined
 .1.3.6.1.4.1.25506.2.113.2.3.1.3

hh3cPBRMibApplyPrecedenceTable

table
.1.3.6.1.4.1.25506.2.113.2.4 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibApplyPrecedenceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibApplyPrecedenceTable' 
A table for precedence values being used by a policy node.
Only one precedence value can be used within a node at most.
hh3cPBRMibApplyPrecedenceEntry row .1.3.6.1.4.1.25506.2.113.2.4.1
An entry for policy node with an action
to set IP precedence for matching packets.
Indexes
Column Syntax OID
hh3cPBRMibApplyPrecedenceValue
Value of precedence being applied on IP header.
<0-7> Value of precedence
routine Specify routine precedence(0)
priority Specify priority precedence(1)
immediate Specify immediate preceden…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.4.1.1

hh3cPBRMibApplyNexthopTable

table
.1.3.6.1.4.1.25506.2.113.2.5 · 1 row entry · 11 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibApplyNexthopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibApplyNexthopTable' 
A table for next hop actions being used by a policy node.
hh3cPBRMibApplyNexthopEntry row .1.3.6.1.4.1.25506.2.113.2.5.1
An entry for policy node with an action
to set next hop for matching packets.
Indexes
Column Syntax OID
hh3cPBRMibApplyNexthopIndex
Index of next hop for the apply next hop action.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.113.2.5.1.1
hh3cPBRMibApplyNexthopVpnName
Name of VPN instance where apply next hop action is used.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.2.113.2.5.1.2
hh3cPBRMibApplyNexthopAddressType
Address type of hh3cPBRMibApplyNexthopAddress,
which can be IPv4 or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.113.2.5.1.3
hh3cPBRMibApplyNexthopAddress
Next hop IP address of apply next hop action.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.113.2.5.1.4
hh3cPBRMibApplyNexthopTrackId
Identifier of track object related with next hop.
Specifies a track entry by its number in the range of 1 to 1024.
Setting 0 indicates closing this function.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.5.1.5
hh3cPBRMibApplyNexthopDirect
Direct route attribute of next hop
according to route information.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.5.1.6
hh3cPBRMibApplyNexthopRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.113.2.5.1.7
hh3cPBRMibApplyNexthopInboundVpn
Specifies the VPN instance where the inbound interface belongs.
If the value is set to TRUE, the VPN instance name will be ignored.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.5.1.8
hh3cPBRMibApplyNexthopWeight
Specifies a load sharing weight in the range of 1 and 100 for the next hop.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.5.1.9
hh3cPBRMibApplyNexthopPathId
Specifies a service chain by its path ID in the range of 1 and 16777215.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.5.1.10
hh3cPBRMibApplyNexthopPathIndex
Specifies a node in the service chain as
a next hop by its index in the range of 1 and 255.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.5.1.11

hh3cPBRMibApplyDefaultNexthopTable

table
.1.3.6.1.4.1.25506.2.113.2.6 · 1 row entry · 10 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cPBRMibApplyDefaultNexthopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-PBR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-PBR-MIB::hh3cPBRMibApplyDefaultNexthopTable' 
A table for default next hop actions being used by a policy
node.
hh3cPBRMibApplyDefaultNexthopEntry row .1.3.6.1.4.1.25506.2.113.2.6.1
An entry for policy node with an action
to set default next hop for matching packets.
Indexes
Column Syntax OID
hh3cPBRMibApplyDefaultNexthopIndex
Index of default next hop for the apply
default next hop action.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.113.2.6.1.1
hh3cPBRMibApplyDefaultNexthopVpnName
Name of VPN instance where apply default next hop action
is used.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.25506.2.113.2.6.1.2
hh3cPBRMibApplyDefaultNexthopAddressType
Address type of hh3cPBRMibApplyDefaultNexthopAddress,
which can be IPv4 or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.113.2.6.1.3
hh3cPBRMibApplyDefaultNexthopAddress
Next hop IP address of apply default next hop action.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.113.2.6.1.4
hh3cPBRMibApplyDefaultNexthopTrackId
Identifier of track object related with default next hop.
Specifies a track entry by its number in the range of 1 to 1024.
Setting 0 indicates closing this function.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.6.1.5
hh3cPBRMibApplyDefaultNexthopDirect
Direct route attribute of apply default next hop
address according to route information.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.6.1.6
hh3cPBRMibApplyDefaultNexthopRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.113.2.6.1.7
hh3cPBRMibApplyDefNexthopInbVpn
Specifies the VPN instance where the inbound interface belongs.
If the value is set to TRUE, the VPN instance name will be ignored.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.113.2.6.1.8
hh3cPBRMibApplyDefNexthopPathId
Specifies a service chain by its path ID in the range of 1 and 16777215.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.6.1.9
hh3cPBRMibApplyDefNexthopPathInd
Specifies a node in the service chain as
a default next hop by its index in the range of 1 and 255.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.113.2.6.1.10