HH3C-LI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
44
.1.3.6.1.4.1.25506.2.111.1.3.2 · 1 row entry · 10 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cLIMediationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LI-MIB::hh3cLIMediationTable'
This table describes interception gateway information with which
interception device communicates.
hh3cLIMediationEntry row .1.3.6.1.4.1.25506.2.111.1.3.2.1
An entry of configuring mediation device.
Column Syntax OID
hh3cLIMediationIndex is a entry identifier. The Mediation Device
should be responsible for making sure these are unique.
Before creating a new entry, a value for this variable may be
obtained by reading hh3cLINewIndex …
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.25506.2.111.1.3.2.1.1
The type of hh3cLIMediationDestAddr.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.111.1.3.2.1.2
The IP Address of the Mediation Device to receive intercepted traffic.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.111.1.3.2.1.3
The L4-port number on the Mediation Device
to receive intercepted traffic.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.25506.2.111.1.3.2.1.4
The interface on the intercepting device from which to
transmit intercepted data.
If zero, intercepting device will select an outbound
interface according to hh3cLIMediationDestAddr.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.25506.2.111.1.3.2.1.5
The Differentiated Services Code Point the intercepting
device applies to the IP packets encapsulating the intercepted traffic.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.2.111.1.3.2.1.6
The time at which this row and all related Stream Table rows
should be automatically removed, and the intercept function expire.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.25506.2.111.1.3.2.1.7
The protocol used in transferring intercepted data to the
Mediation Device.
Enumerationr/w
Enumerated Values:
1udp
.1.3.6.1.4.1.25506.2.111.1.3.2.1.8
This variable controls the generation of any notifications or
informs by the MIB agent for this table entry.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.25506.2.111.1.3.2.1.9
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.111.1.3.2.1.10
.1.3.6.1.4.1.25506.2.111.1.3.3 · 1 row entry · 8 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cLIStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LI-MIB::hh3cLIStreamTable'
This table lists the traffic stream's type to be intercepted.
The specified filter is defined in hh3cLIIPStreamTable,
hh3cLIMACStreamTable or hh3cLIUserStreamTable, according to
hh3cLIStreamtype.  Also it contains counters for packets to
be intercepted and dropped by attached type of filter.
hh3cLIStreamEntry row .1.3.6.1.4.1.25506.2.111.1.3.3.1
A single type of data stream to be intercepted.
Column Syntax OID
The index of the stream entry.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.25506.2.111.1.3.3.1.1
Identifies the type of stream, and according to it uses filter table.
It can not be changed after a filter table is attached to it.
The following types of streams are supported:
ip: IP filter. The exact de…
Enumerationr/w
Enumerated Values:
1ip
2mac
3userConnection
.1.3.6.1.4.1.25506.2.111.1.3.3.1.2
If 'true', the interception is active. And it is set to 'true'
only after an additional filter specification has been attached
to this stream.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.25506.2.111.1.3.3.1.3
The numbers of packets that have been intercepted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.111.1.3.3.1.4
The numbers of packets were dropped in the lawful intercept process.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.111.1.3.3.1.5
The numbers of packets have been intercepted.
This object is a 64-bit version of hh3cLIStreamPackets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.111.1.3.3.1.6
The numbers of packets were dropped in the lawful intercept process.
This object is a 64-bit version of hh3cLIStreamDrops.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.25506.2.111.1.3.3.1.7
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.111.1.3.3.1.8
.1.3.6.1.4.1.25506.2.111.2.1.1 · 1 row entry · 16 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cLIIPStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LI-MIB::hh3cLIIPStreamTable'
This table lists the IPv4 and IPv6 streams to be intercepted.
It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
hh3cLIIPStreamEntry row .1.3.6.1.4.1.25506.2.111.2.1.1.1
A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hh3cLIStreamTable. The second index permits multiple
classifiers to be us…
Column Syntax OID
Traffic received or transmitted over this interface
will be intercepted.

This value must be set when creating a stream entry,
either zero, or a valid interface index.

If the value is zero, …
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.25506.2.111.2.1.1.1.1
The type of address, used in packet selection.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.25506.2.111.2.1.1.1.2
The Destination address used in packet selection.
This address will be consistent with the type specified in
hh3cLIIPStreamAddrType.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.3
The length of the Destination Prefix. A value of zero means
all addresses to match. This prefix length will be consistent
with the type specified in hh3cLIIPStreamAddrType.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.25506.2.111.2.1.1.1.4
The Source Address used in packet selection. This address will
be consistent with the type specified in hh3cLIIPStreamAddrType.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.5
The length of the Source Prefix. A value of zero means all
addresses to match. This prefix length will be consistent with
the type specified in hh3cLIIPStreamAddrType.
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.25506.2.111.2.1.1.1.6
The value of the TOS byte.
If hh3cLIIPStreamTosByte&(~hh3cLIIPStreamTosByteMask)!=0,
configuration is rejected.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.7
This value is ANDed with the value of the TOS byte in a packet
and compared with hh3cLIIPStreamTosByte. If the values are equal,
the comparison is equal.
If both the mask and the TosByte value are zero,
the result is t…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.8
The flow identifier in an IPv6 header. -1 indicates that the
Flow Id is unused.
Integer32r/w
Constraints:
range: -1-1048575
.1.3.6.1.4.1.25506.2.111.2.1.1.1.9
The IP protocol to match against the IPv4 protocol number or
the IPv6 Next- Header number in the packet.
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.10
The minimum value that the layer-4 destination port number in
the packet must have in order to match. This value must be
equal to or less than the value specified for this entry in
hh3cLIIPStreamDestL4PortMax.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.25506.2.111.2.1.1.1.11
The maximum value that the layer-4 destination port number in
the packet must have in order to match this classifier entry.
This value must be equal to or greater than the value specified
for this entry in hh3cLIIPStrea…
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.25506.2.111.2.1.1.1.12
The minimum value that the layer-4 destination port number in
the packet must have in order to match. This value must be
equal to or less than the value specified for this entry in
hh3cLIIPStreamSrcL4PortMax.
If both h…
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.25506.2.111.2.1.1.1.13
The maximum value that the layer-4 destination port number in
the packet must have in order to match this classifier entry.
This value must be equal to or greater than the value specified
for this entry in hh3cLIIPStrea…
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.25506.2.111.2.1.1.1.14
It is the name of a Virtual Routing and Forwarding (VRF) of a VPN.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.25506.2.111.2.1.1.1.15
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.111.2.1.1.1.18
.1.3.6.1.4.1.25506.2.111.3.1.1 · 1 row entry · 8 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cLIMACStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LI-MIB::hh3cLIMACStreamTable'
This table lists the IEEE 802 streams to be intercepted.
It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
hh3cLIMACStreamEntry row .1.3.6.1.4.1.25506.2.111.3.1.1.1
A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hh3cLIStreamTable. The second index permits multiple
classifiers to be us…
Column Syntax OID
This object displays what attributes will be compared to
identify traffic.
interface: indicates that traffic on the stated
interface is to be intercepted
dstMacAddress: indicates that traffic …
Bitsr/w
Enumerated Values:
0interface
1dstMacAddress
2srcMacAddress
3ethernetPid
4dSap
5sSap
.1.3.6.1.4.1.25506.2.111.3.1.1.1.1
Traffic received or transmitted over this interface
will be intercepted.
This value must be set when creating a stream entry,
either zero, or a valid interface index.
If the value is zero, interception accepts any inter…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.25506.2.111.3.1.1.1.2
The Destination address used in packet selection.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.111.3.1.1.1.3
The Source Address used in packet selection.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.25506.2.111.3.1.1.1.4
The value of the Ethernet Protocol Identifier in the
Ethernet traffic or IEEE 802.2 SNAP traffic.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.111.3.1.1.1.5
The value of the IEEE 802.2 Destination SAP.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.111.3.1.1.1.6
The value of the IEEE 802.2 Source SAP.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.25506.2.111.3.1.1.1.7
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.111.3.1.1.1.8
.1.3.6.1.4.1.25506.2.111.4.1.1 · 1 row entry · 2 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cLIUserStreamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-LI-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-LI-MIB::hh3cLIUserStreamTable'
This table lists the user connection streams to be intercepted.
It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
hh3cLIUserStreamEntry row .1.3.6.1.4.1.25506.2.111.4.1.1.1
A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hh3cLIStreamTable. This permits multiple classifiers
to be used together.
Column Syntax OID
This is the RADIUS attribute 44 acct-session-ID.
The string must be set, and the length not be zero.
OctetStringr/w
Constraints:
range: 0-253
.1.3.6.1.4.1.25506.2.111.4.1.1.1.1
Operation status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.25506.2.111.4.1.1.1.2