HH3C-IPSEC-MONITOR-V2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
97

hh3cIPsecTunnelV2Table

table
.1.3.6.1.4.1.25506.2.126.1.2 · 1 row entry · 37 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cIPsecTunnelV2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-V2-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunnelV2Table' 
The IPsec Phase-2 Tunnel Table.  There is one entry in this
table for each active IPsec Phase-2 Tunnel.
hh3cIPsecTunnelV2Entry row .1.3.6.1.4.1.25506.2.126.1.2.1
Information about hh3cIPsecTunnelV2Table.
Indexes
Column Syntax OID
hh3cIPsecTunIndexV2
The index of IPsec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2147483647.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.1
hh3cIPsecTunIfIndexV2
The interface index( the ifIndex of ifTable ).
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.25506.2.126.1.2.1.2
hh3cIPsecTunIKETunnelIndexV2
The index of the associated IPsec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.3
hh3cIPsecTunIKETunLocalIDTypeV2
The type of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable).
Hh3cIPsecIDTypeV2
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.25506.2.126.1.2.1.4
hh3cIPsecTunIKETunLocalIDVal1V2deprecated
The value of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to iden…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.2.1.5
hh3cIPsecTunIKETunLocalIDVal2V2
The second specification of the local peer's IP address for the
associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the
IKETunnelTable).

If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.2.1.6
hh3cIPsecTunIKETunRemoteIDTypeV2
The type of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable).
Hh3cIPsecIDTypeV2
Type Values:
0reserved
1ipv4Addr
2fqdn
3userFqdn
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
9derAsn1Dn
10derAsn1Gn
11keyId
 .1.3.6.1.4.1.25506.2.126.1.2.1.7
hh3cIPsecTunIKETunRemoteIDVal1V2deprecated
The value of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to i…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.2.1.8
hh3cIPsecTunIKETunRemoteIDVal2V2
The second specification of the remote peer's IP address for the
associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
IKETunnelTable).

If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, th…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.2.1.9
hh3cIPsecTunLocalAddrTypeV2
The type of the IP address for the local peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.2.1.10
hh3cIPsecTunLocalAddrV2
The IP address of the local peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.2.1.11
hh3cIPsecTunRemoteAddrTypeV2
The type of the IP address for the remote peer of the IPsec Phase-2
Tunnel.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.2.1.12
hh3cIPsecTunRemoteAddrV2
The IP address of the remote peer for the IPsec Phase-2 Tunnel.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.2.1.13
hh3cIPsecTunKeyTypeV2
The key negotiate mode used by the IPsec Phase-2 Tunnel.
Hh3cIPsecNegoTypeV2
Type Values:
1ike
2manual
2147483647invalidType
 .1.3.6.1.4.1.25506.2.126.1.2.1.14
hh3cIPsecTunEncapModeV2
The encapsulation mode used by the IPsec Phase-2 Tunnel.
Hh3cIPsecEncapModeV2
Type Values:
1tunnel
2transport
2147483647invalidMode
 .1.3.6.1.4.1.25506.2.126.1.2.1.15
hh3cIPsecTunInitiatorV2
The initiator of this IPsec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.
Enumeration
Enumerated Values:
1local
2remote
2147483647none
 .1.3.6.1.4.1.25506.2.126.1.2.1.16
hh3cIPsecTunLifeSizeV2
The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.126.1.2.1.17
hh3cIPsecTunLifeTimeV2
The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.18
hh3cIPsecTunRemainTimeV2
The remain time of SA in seconds. 2147483647 is defined as invalid
value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.19
hh3cIPsecTunActiveTimeV2
The duration the IPsec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.20
hh3cIPsecTunRemainSizeV2
The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.126.1.2.1.21
hh3cIPsecTunTotalRefreshesV2
The total number of security association refreshing performed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.126.1.2.1.22
hh3cIPsecTunCurrentSaInstancesV2
The number of security associations which are currently active
or expiring.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.126.1.2.1.23
hh3cIPsecTunInSaEncryptAlgoV2
The encryption algorithm used by the inbound security association
of the IPsec Phase-2 Tunnel.
Hh3cIPsecEncryptAlgoV2
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
15aesCtr128
16aesCtr192
17aesCtr256
18camelliaCbc128
19camelliaCbc192
20camelliaCbc256
21gmac128
22gmac192
23gmac256
24gcm128
25gcm192
26gcm256
128sm1Cbc128
129sm1Cbc192
130sm1Cbc256
131sm4Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.24
hh3cIPsecTunInSaAhAuthAlgoV2
The authentication algorithm used by the inbound authentication
header (AH) security association of the IPsec Phase-2 Tunnel.
Hh3cIPsecAuthAlgoV2
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
6aesXcbcMac
128sm3
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.25
hh3cIPsecTunInSaEspAuthAlgoV2
The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
Hh3cIPsecAuthAlgoV2
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
6aesXcbcMac
128sm3
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.26
hh3cIPsecTunDiffHellmanGrpV2
The Diffie Hellman Group used by the security association of the
IPsec Phase-2 Tunnel.
Hh3cIPsecDiffHellmanGrpV2
Type Values:
0none
1dhGroup1
2dhGroup2
5dhGroup5
14dhGroup14
24dhGroup24
2147483647invalidGroup
 .1.3.6.1.4.1.25506.2.126.1.2.1.27
hh3cIPsecTunOutSaEncryptAlgoV2
The encryption algorithm used by the outbound security
association of the IPsec Phase-2 Tunnel.
Hh3cIPsecEncryptAlgoV2
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
15aesCtr128
16aesCtr192
17aesCtr256
18camelliaCbc128
19camelliaCbc192
20camelliaCbc256
21gmac128
22gmac192
23gmac256
24gcm128
25gcm192
26gcm256
128sm1Cbc128
129sm1Cbc192
130sm1Cbc256
131sm4Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.28
hh3cIPsecTunOutSaAhAuthAlgoV2
The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPsec Phase-2 Tunnel.
Hh3cIPsecAuthAlgoV2
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
6aesXcbcMac
128sm3
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.29
hh3cIPsecTunOutSaEspAuthAlgoV2
The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPsec
Phase-2 Tunnel.
Hh3cIPsecAuthAlgoV2
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
6aesXcbcMac
128sm3
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.2.1.30
hh3cIPsecTunPolicyNameV2
The policy name used by this IPsec tunnel.
OctetString
Constraints:
range: 1-63
 .1.3.6.1.4.1.25506.2.126.1.2.1.31
hh3cIPsecTunPolicyNumV2
The sequence number of policy used by this IPsec tunnel.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.126.1.2.1.32
hh3cIPsecTunStatusV2
The status of the IPsec Tunnel.
Enumeration
Enumerated Values:
1initial
2ready
3rekeyed
4closed
 .1.3.6.1.4.1.25506.2.126.1.2.1.33
hh3cIPsecTunPolicyDescriptionV2
IPsec policy description of an IPsec tunne.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.25506.2.126.1.2.1.34
hh3cIPsecTunIKETunLocalIDVal3V2
The value of the local peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable).

If the local peer type is ipv4Addr/ipv6Addr, this is the IP address
used to iden…
OctetString
Constraints:
range: 0-2047
 .1.3.6.1.4.1.25506.2.126.1.2.1.35
hh3cIPsecTunIKETunRemoteIDVal3V2
The value of the remote peer identity for the associated IPsec
Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable).

If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address
used to i…
OctetString
Constraints:
range: 0-2047
 .1.3.6.1.4.1.25506.2.126.1.2.1.36
hh3cIPsecTunProfileNameV2
The profile name used by this IPsec tunnel.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.2.1.37

hh3cIPsecTunnelStatV2Table

table
.1.3.6.1.4.1.25506.2.126.1.3 · 1 row entry · 17 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cIPsecTunnelStatV2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-V2-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunnelStatV2Table' 
The IPsec Phase-2 Tunnel Statistics Table.
hh3cIPsecTunnelStatV2Entry row .1.3.6.1.4.1.25506.2.126.1.3.1
Information about hh3cIPsecTunnelStatV2Table.
Indexes
Column Syntax OID
hh3cIPsecTunInOctetsV2
The total number of octets received by this IPsec Phase-2 Tunnel.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.1
hh3cIPsecTunInDecompOctetsV2
The total number of decompressed octets received by this IPsec
Phase-2 Tunnel. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.2
hh3cIPsecTunInPktsV2
The total number of packets received by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.3
hh3cIPsecTunInDropPktsV2
The total number of packets dropped during receiving process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.4
hh3cIPsecTunInReplayDropPktsV2
The total number of packets dropped during
receiving process due to Anti-Replay process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.5
hh3cIPsecTunInAuthFailsV2
The total number of inbound authentication's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.6
hh3cIPsecTunInDecryptFailsV2
The total number of inbound decryption's
which ended in failure by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.7
hh3cIPsecTunOutOctetsV2
The total number of octets sent by this IPsec Phase-2 Tunnel.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.8
hh3cIPsecTunOutUncompOctetsV2
The total number of uncompressed octets sent by this IPsec Phase-2
Tunnel. This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.9
hh3cIPsecTunOutPktsV2
The total number of packets sent by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.10
hh3cIPsecTunOutDropPktsV2
The total number of packets dropped during sending process
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.11
hh3cIPsecTunOutEncryptFailsV2
The total number of outbound encryption's which ended in failure
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.12
hh3cIPsecTunNoMemoryDropPktsV2
The total number of packets dropped due to no enough memory by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.13
hh3cIPsecTunQueueFullDropPktsV2
The total number of packets dropped due to queue full by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.14
hh3cIPsecTunInvalidLenDropPktsV2
The total number of packets dropped due to invalid length packet
by this IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.15
hh3cIPsecTunTooLongDropPktsV2
The total number of packets dropped due to too long packet by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.16
hh3cIPsecTunInvalidSaDropPktsV2
The total number of packets dropped due to invalid SA by this
IPsec Phase-2 Tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.3.1.17

hh3cIPsecSaV2Table

table
.1.3.6.1.4.1.25506.2.126.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cIPsecSaV2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-V2-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecSaV2Table' 
The IPsec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.
hh3cIPsecSaV2Entry row .1.3.6.1.4.1.25506.2.126.1.4.1
Information about hh3cIPsecSaV2Table.
Indexes
Column Syntax OID
hh3cIPsecSaIndexV2
The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPsec Phase-2 Tunnel. The value of this object …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.25506.2.126.1.4.1.1
hh3cIPsecSaDirectionV2
The direction of the SA.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.25506.2.126.1.4.1.2
hh3cIPsecSaSpiValueV2
The value of the SPI.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.25506.2.126.1.4.1.3
hh3cIPsecSaSecProtocolV2
The security protocol of the SA.
Hh3cIPsecSaProtocolV2
Type Values:
0reserved
2ah
3esp
4ipcomp
 .1.3.6.1.4.1.25506.2.126.1.4.1.4
hh3cIPsecSaEncryptAlgoV2
The encryption algorithm used by the security association
of the IPsec Phase-2 Tunnel.
Hh3cIPsecEncryptAlgoV2
Type Values:
0none
1desCbc
2ideaCbc
3blowfishCbc
4rc5R16B64Cbc
5tripleDesCbc
6castCbc
7aesCbc
8nsaCbc
9aesCbc128
10aesCbc192
11aesCbc256
12aesCtr
13aesCamelliaCbc
14rc4
15aesCtr128
16aesCtr192
17aesCtr256
18camelliaCbc128
19camelliaCbc192
20camelliaCbc256
21gmac128
22gmac192
23gmac256
24gcm128
25gcm192
26gcm256
128sm1Cbc128
129sm1Cbc192
130sm1Cbc256
131sm4Cbc
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.4.1.5
hh3cIPsecSaAuthAlgoV2
The authentication algorithm used by the SA.
Hh3cIPsecAuthAlgoV2
Type Values:
0none
1md5
2sha1
3sha256
4sha384
5sha512
6aesXcbcMac
128sm3
2147483647invalidAlg
 .1.3.6.1.4.1.25506.2.126.1.4.1.6
hh3cIPsecSaStatusV2
The status of the SA.
Enumeration
Enumerated Values:
1active
2expiring
 .1.3.6.1.4.1.25506.2.126.1.4.1.7

hh3cIPsecTrafficV2Table

table
.1.3.6.1.4.1.25506.2.126.1.5 · 1 row entry · 18 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cIPsecTrafficV2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-V2-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTrafficV2Table' 
The IPsec Phase-2 Tunnel Traffic Table.
hh3cIPsecTrafficV2Entry row .1.3.6.1.4.1.25506.2.126.1.5.1
Information about hh3cIPsecTrafficV2Table.
Indexes
Column Syntax OID
hh3cIPsecTrafficLocalTypeV2
The type of the local peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
Hh3cIPsecTrafficTypeV2
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.25506.2.126.1.5.1.1
hh3cIPsecTrafficLocalAddr1TypeV2
The type of the first IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.5.1.2
hh3cIPsecTrafficLocalAddr1V2
The first IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet,…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.5.1.3
hh3cIPsecTrafficLocalAddr2TypeV2
The type of the second IP address specification for the local peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.5.1.4
hh3cIPsecTrafficLocalAddr2V2
The second IP address specification of the local peer's traffic.

If the local peer's traffic type is single IP address, this is the
IP address.

If the local peer's traffic type is IP subnet…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.5.1.5
hh3cIPsecTrafficLocalProtocol1V2
The first protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type o…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.5.1.6
hh3cIPsecTrafficLocalProtocol2V2
The second protocol number specification of the local peer's traffic.

If the protocol type of the local peer's traffic is single protocol,
this is the protocol number.

If the protocol type …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.5.1.7
hh3cIPsecTrafficLocalPort1V2
The first port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's t…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.126.1.5.1.8
hh3cIPsecTrafficLocalPort2V2
The second port number specification of the local peer's traffic.

If the port type of the local peer's traffic is single port, this is
the port number.

If the port type of the local peer's …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.126.1.5.1.9
hh3cIPsecTrafficRemoteTypeV2
The type of the remote peer's traffic. Possible values are:
1) A single IP address
2) An IP address range
3) An IP subnet
Hh3cIPsecTrafficTypeV2
Type Values:
1ipv4Addr
4ipv4AddrSubnet
5ipv6Addr
6ipv6AddrSubnet
7ipv4AddrRange
8ipv6AddrRange
 .1.3.6.1.4.1.25506.2.126.1.5.1.10
hh3cIPsecTrafficRemAddr1TypeV2
The type of the first IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.5.1.11
hh3cIPsecTrafficRemAddr1V2
The first IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is th…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.5.1.12
hh3cIPsecTrafficRemAddr2TypeV2
The type of the second IP address specification for the remote peer's
traffic.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.126.1.5.1.13
hh3cIPsecTrafficRemAddr2V2
The second IP address specification of the remote peer's traffic.

If the remote traffic type is single IP address, this is the IP address.

If the remote traffic type is IP subnet, this is t…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.126.1.5.1.14
hh3cIPsecTrafficRemoPro1V2
The first protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol type…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.5.1.15
hh3cIPsecTrafficRemoPro2V2
The second protocol number specification of the remote peer's traffic.

If the protocol type of the remote peer's traffic is single protocol,
this is the protocol number.

If the protocol typ…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.25506.2.126.1.5.1.16
hh3cIPsecTrafficRemPort1V2
The first port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer'…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.126.1.5.1.17
hh3cIPsecTrafficRemPort2V2
The second port number specification of the remote peer's traffic.

If the port type of the remote peer's traffic is single port,
this is the port number.

If the port type of the remote peer…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25506.2.126.1.5.1.18

hh3cIPsecTunnelStatByDescripV2Table

table
.1.3.6.1.4.1.25506.2.126.1.10 · 1 row entry · 18 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cIPsecTunnelStatByDescripV2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-V2-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-V2-MIB::hh3cIPsecTunnelStatByDescripV2Table' 
This table contains IPsec phase-2 tunnel statistics by description.
hh3cIPsecTunnelStatByDescripV2Entry row .1.3.6.1.4.1.25506.2.126.1.10.1
An entry of IPsec phase-2 tunnels statistics by description table.
Indexes
Column Syntax OID
hh3cIPsecPolicyDescripV2
The IPsec policy's description.
OctetString
Constraints:
range: 1-80
 .1.3.6.1.4.1.25506.2.126.1.10.1.1
hh3cIPsecTunInOctetsByDescripV2
The total number of octets received by IPsec phase-2 tunnels.
This value is accumulated BEFORE determining whether or not the
packet should be decompressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.2
hh3cIPsecTunInDecompOctetsByDescripV2
The total number of decompressed octets received by IPsec
phase-2 tunnels. This value is accumulated AFTER the packet
is decompressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.3
hh3cIPsecTunInPktsByDescripV2
The total number of packets received by IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.4
hh3cIPsecTunInDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels during receiving process.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.5
hh3cIPsecTunInReplayDropPktsByDescripV2
The total number of receive packets dropped by IPsec phase-2 tunnels
due to Anti-Replay processing.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.6
hh3cIPsecTunInAuthFailsByDescripV2
The total number of inbound authentication
failures on IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.7
hh3cIPsecTunInDecryptFailsByDescripV2
The total number of inbound decryption
failures on IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.8
hh3cIPsecTunOutOctetsByDescripV2
The total number of octets sent by IPsec phase-2 tunnels.
This value is accumulated AFTER determining whether or not
the packet should be compressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.9
hh3cIPsecTunOutUncompOctetsByDescripV2
The total number of uncompressed octets sent by IPsec phase-2
tunnels. This value is accumulated BEFORE the packet is compressed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.10
hh3cIPsecTunOutPktsByDescripV2
The total number of packets sent by IPsec phase-2 tunnels.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.11
hh3cIPsecTunOutDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels during sending process.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.12
hh3cIPsecTunOutEncryptFailsByDescripV2
The total number of outbound encryption failures
on IPsec Phase-2 Tunnels.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.13
hh3cIPsecTunNoMemoryDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to no enough memory.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.14
hh3cIPsecTunQueueFullDropPktsByDescripV2
The total number of packets dropped by
IPsec phase-2 tunnels due to queue full.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.15
hh3cIPsecTunInvalidLenDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to invalid length packet.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.16
hh3cIPsecTunTooLongDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to packet.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.17
hh3cIPsecTunInvalidSaDropPktsByDescripV2
The total number of packets dropped by IPsec phase-2 tunnels due to invalid SA.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.126.1.10.1.18