HH3C-IPSEC-MONITOR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hh3cIPSecTunnelTable

table

.1.3.6.1.4.1.25506.2.7.1.1 · 1 row entry · 26 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cIPSecTunnelTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-MIB::hh3cIPSecTunnelTable'

The IPSec Phase-2 Tunnel Table. There is one
entry in this table for each active IPSec Phase-2 Tunnel.

hh3cIPSecTunnelEntry row .1.3.6.1.4.1.25506.2.7.1.1.1

Information about hh3cIPSecTunnelTable.

Indexes

No indexes recorded

Column Syntax OID

hh3cIPSecTunIfIndex

The interface index( the ifIndex of ifTable ).

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.1

hh3cIPSecTunEntryIndex

The index of IPSec policy applied in the interface.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.2

hh3cIPSecTunIndex

The index of IPSec Phase-2 Tunnel Table. The value of
the index is a number which begins at one and is
incremented with each tunnel that is created. The
value of this object will wrap at 2,147,483,647.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.3

hh3cIPSecTunIKETunnelIndex

The index of the associated IPSec Phase-1 IKE Tunnel
(IKETunIndex in the IKETunnelTable). 2147483647 is defined as
invalid value.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.4

hh3cIPSecTunLocalAddr

The IP address of the local peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.1.1.5

hh3cIPSecTunRemoteAddr

The IP address of the remote peer for the IPSec Phase-2
Tunnel. 0.0.0.0 is defined as invalid value.

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.1.1.6

hh3cIPSecTunKeyType

The key negotiate mode used by the IPSec Phase-2 Tunnel.

Hh3cIPSecNegoType

Type Values:

1	ike
2	manual
2147483647	invalidType

.1.3.6.1.4.1.25506.2.7.1.1.1.7

hh3cIPSecTunEncapMode

The encapsulation mode used by the IPSec Phase-2 Tunnel.

Hh3cEncapMode

Type Values:

1	tunnel
2	transport
2147483647	invalidMode

.1.3.6.1.4.1.25506.2.7.1.1.1.8

hh3cIPSecTunInitiator

The initiator of this IPSec tunnel. Value none is used for manual
IPsec tunnel, for there is no initiator or responder in this method.

Enumeration

.1.3.6.1.4.1.25506.2.7.1.1.1.9

hh3cIPSecTunLifeSize

The negotiated LifeSize of the IPSec Phase-2 Tunnel in kilobytes.
0 is defined as invalid value.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.7.1.1.1.10

hh3cIPSecTunLifeTime

The negotiated LifeTime of the IPSec Phase-2 Tunnel in seconds.
2147483647 is defined as invalid value.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.11

hh3cIPSecTunRemainTime

The remain time of SA in seconds. 2147483647 is defined as invalid
value.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.12

hh3cIPSecTunActiveTime

The duration the IPSec Phase-2 Tunnel has been active in
hundredths of seconds. 2147483647 is defined as invalid value.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.13

hh3cIPSecTunRemainSize

The remain LifeSize of SA in kilobytes. 0 is defined as
invalid value.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.7.1.1.1.14

hh3cIPSecTunTotalRefreshes

The total number of security association refreshing performed.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.7.1.1.1.15

hh3cIPSecTunCurrentSaInstances

The number of security associations which are currently active
or expiring.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.7.1.1.1.16

hh3cIPSecTunInSaEncryptAlgo

The encryption algorithm used by the inbound security association
of the IPSec Phase-2 Tunnel.

Hh3cEncryptAlgo

Type Values:

0	none
1	desCbc
2	ideaCbc
3	blowfishCbc
4	rc5R16B64Cbc
5	tripledesCbc
6	castCbc
7	aesCbc
8	nsaCbc
9	aesCbc128
10	aesCbc192
11	aesCbc256
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.17

hh3cIPSecTunInSaAhAuthAlgo

The authentication algorithm used by the inbound authentication
header (AH) security association of the IPSec Phase-2 Tunnel.

Hh3cAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.18

hh3cIPSecTunInSaEspAuthAlgo

The authentication algorithm used by the inbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.

Hh3cAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.19

hh3cIPSecTunDiffHellmanGrp

The Diffie Hellman Group used by the security association of the
IPSec Phase-2 Tunnel.

Hh3cDiffHellmanGrp

Type Values:

0	none
1	modp768
2	modp1024
5	modp1536
14	modp2048
2147483647	invalidGroup

.1.3.6.1.4.1.25506.2.7.1.1.1.20

hh3cIPSecTunOutSaEncryptAlgo

The encryption algorithm used by the outbound security
association of the IPSec Phase-2 Tunnel.

Hh3cEncryptAlgo

Type Values:

0	none
1	desCbc
2	ideaCbc
3	blowfishCbc
4	rc5R16B64Cbc
5	tripledesCbc
6	castCbc
7	aesCbc
8	nsaCbc
9	aesCbc128
10	aesCbc192
11	aesCbc256
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.21

hh3cIPSecTunOutSaAhAuthAlgo

The authentication algorithm used by the outbound
authentication header (AH) security association of
the IPSec Phase-2 Tunnel.

Hh3cAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.22

hh3cIPSecTunOutSaEspAuthAlgo

The authentication algorithm used by the outbound encapsulation
security protocol(ESP) security association of the IPSec
Phase-2 Tunnel.

Hh3cAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.1.1.23

hh3cIPSecTunPolicyName

The policy name used by this IPSec tunnel.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.7.1.1.1.24

hh3cIPSecTunPolicyNum

The sequence number of policy used by this IPSec tunnel.

Integer32

.1.3.6.1.4.1.25506.2.7.1.1.1.25

hh3cIPSecTunStatus

The status of the IPSec Tunnel.

Enumeration

.1.3.6.1.4.1.25506.2.7.1.1.1.26

hh3cIPSecTunnelStatTable

table

.1.3.6.1.4.1.25506.2.7.1.2 · 1 row entry · 17 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cIPSecTunnelStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-MIB::hh3cIPSecTunnelStatTable'

The IPSec Phase-2 Tunnel Statistics Table.

hh3cIPSecTunnelStatEntry row .1.3.6.1.4.1.25506.2.7.1.2.1

Information about hh3cIPSecTunnelStatTable.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cIPSecTunInOctets The total number of octets received by this IPSec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.1`
hh3cIPSecTunInDecompOctets The total number of decompressed octets received by this IPSec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.2`
hh3cIPSecTunInPkts The total number of packets received by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.3`
hh3cIPSecTunInDropPkts The total number of packets dropped during receiving process by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.4`
hh3cIPSecTunInReplayDropPkts The total number of packets dropped during receiving process due to Anti-Replay process by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.5`
hh3cIPSecTunInAuthFails The total number of inbound authentication's which ended in failure by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.6`
hh3cIPSecTunInDecryptFails The total number of inbound decryption's which ended in failure by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.7`
hh3cIPSecTunOutOctets The total number of octets sent by this IPSec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.8`
hh3cIPSecTunOutUncompOctets The total number of uncompressed octets sent by this IPSec Phase-2 Tunnel.This value is accumulated BEFORE the packet is compressed.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.9`
hh3cIPSecTunOutPkts The total number of packets sent by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.10`
hh3cIPSecTunOutDropPkts The total number of packets dropped during sending process by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.7.1.2.1.11`
hh3cIPSecTunOutEncryptFails The total number of outbound encryption's which ended in failure by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.12`
hh3cIPSecTunNoMemoryDropPkts The total number of packets dropped due to no enough memory by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.13`
hh3cIPSecTunQueueFullDropPkts The total number of packets dropped due to queue full by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.14`
hh3cIPSecTunInvalidLenDropPkts The total number of packets dropped due to invalid length packet by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.15`
hh3cIPSecTunTooLongDropPkts The total number of packets dropped due to too long packet by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.16`
hh3cIPSecTunInvalidSaDropPkts The total number of packets dropped due to invalid SA by this IPSec Phase-2 Tunnel.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.7.1.2.1.17`

hh3cIPSecSaTable

table

.1.3.6.1.4.1.25506.2.7.1.3 · 1 row entry · 7 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cIPSecSaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-MIB::hh3cIPSecSaTable'

The IPSec Phase-2 Security Protection Index Table.  This table
contains an entry for each active and expiring security association.

hh3cIPSecSaEntry row .1.3.6.1.4.1.25506.2.7.1.3.1

Information about hh3cIPSecSaTable.

Indexes

No indexes recorded

Column Syntax OID

hh3cIPSecSaIndex

The number of the Sa associated with the Phase-2 Tunnel
Table. The value of this index is a number which begins
at one and is incremented with each Sa associated with
an IPSec Phase-2 Tunnel. The value of this object …

Integer32

.1.3.6.1.4.1.25506.2.7.1.3.1.1

hh3cIPSecSaDirection

The direction of the SA.

Enumeration

.1.3.6.1.4.1.25506.2.7.1.3.1.2

hh3cIPSecSaValue

The value of the SPI.

Unsigned32

.1.3.6.1.4.1.25506.2.7.1.3.1.3

hh3cIPSecSaProtocol

The security protocol of the SA.

Hh3cSaProtocol

Type Values:

0	reserved
1	isakmp
2	ah
3	esp
4	ipcomp

.1.3.6.1.4.1.25506.2.7.1.3.1.4

hh3cIPSecSaEncryptAlgo

The encryption algorithm used by the security association
of the IPSec Phase-2 Tunnel.

Hh3cEncryptAlgo

Type Values:

0	none
1	desCbc
2	ideaCbc
3	blowfishCbc
4	rc5R16B64Cbc
5	tripledesCbc
6	castCbc
7	aesCbc
8	nsaCbc
9	aesCbc128
10	aesCbc192
11	aesCbc256
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.3.1.5

hh3cIPSecSaAuthAlgo

The authentication algorithm used by the SA.

Hh3cAuthAlgo

Type Values:

0	none
1	md5
2	sha
2147483647	invalidAlg

.1.3.6.1.4.1.25506.2.7.1.3.1.6

hh3cIPSecSaStatus

The status of the SA.

Enumeration

.1.3.6.1.4.1.25506.2.7.1.3.1.7

hh3cIPSecTrafficTable

table

.1.3.6.1.4.1.25506.2.7.1.4 · 1 row entry · 10 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cIPSecTrafficTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-IPSEC-MONITOR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-IPSEC-MONITOR-MIB::hh3cIPSecTrafficTable'

The IPSec Phase-2 Tunnel Traffic Table.

hh3cIPSecTrafficEntry row .1.3.6.1.4.1.25506.2.7.1.4.1

Information about hh3cIPSecTrafficTable.

Indexes

No indexes recorded

Column Syntax OID

hh3cIPSecTrafficLocalType

The type of local peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.

Hh3cTrafficType

Type Values:

1	ipv4Addr
4	ipv4AddrSubnet
5	ipv6Addr
6	ipv6AddrSubnet
7	ipv4AddrRange
8	ipv6AddrRange

.1.3.6.1.4.1.25506.2.7.1.4.1.1

hh3cIPSecTrafficLocalAddr1

The first specification of local peer's IP address. If
the local peer type is single IP address, then this is the
value of the IP address. If the local peer type is IP subnet,
then this is the value of the subnet. If th…

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.4.1.2

hh3cIPSecTrafficLocalAddr2

The second specification of local peer's IP address. If the local
peer type is single IP address, then this is the value of the
IP address. If the local peer type is IP subnet, then this is
the value of the subnet mask.…

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.4.1.3

hh3cIPSecTrafficLocalProtocol

The protocol number of the local peer's traffic.

Integer32

.1.3.6.1.4.1.25506.2.7.1.4.1.4

hh3cIPSecTrafficLocalPort

The port number of the local peer's traffic.

Integer32

.1.3.6.1.4.1.25506.2.7.1.4.1.5

hh3cIPSecTrafficRemoteType

The type of remote peer. Possible values are: a single
IP address, or an IP address range, or an IP subnet.

Hh3cTrafficType

Type Values:

1	ipv4Addr
4	ipv4AddrSubnet
5	ipv6Addr
6	ipv6AddrSubnet
7	ipv4AddrRange
8	ipv6AddrRange

.1.3.6.1.4.1.25506.2.7.1.4.1.6

hh3cIPSecTrafficRemoteAddr1

The first specification of remote peer's IP address.
If the remote peer type is single IP address, then
this is the value of the IP address. If the remote
peer type is IP subnet, then this is the value
of the subnet. If…

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.4.1.7

hh3cIPSecTrafficRemoteAddr2

Single IP address, then this is the value of the IP
address. If the remote peer type is IP subnet,
then this is the value of the subnet mask. If the
remote peer type is IP address range, then this
is the value of ending…

RFC1155-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.7.1.4.1.8

hh3cIPSecTrafficRemoteProtocol

The protocol number of the remote peer's traffic.

Integer32

.1.3.6.1.4.1.25506.2.7.1.4.1.9

hh3cIPSecTrafficRemotePort

The port number of the remote peer's traffic.

Integer32

.1.3.6.1.4.1.25506.2.7.1.4.1.10