HH3C-HPEOC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hh3cHPEOCCltSysManTable

table

.1.3.6.1.4.1.25506.2.84.1.3 · 1 row entry · 3 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCCltSysManTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCCltSysManTable'

This table implements the management of CLT(Coax Line Terminal).

hh3cHPEOCCltSysManEntry row .1.3.6.1.4.1.25506.2.84.1.3.1

The entry of the table hh3cHPEOCCltSysManTable.

Indexes

IF-MIBifIndex

Column Syntax OID

hh3cHPEOCCltDescr

Set the description of CLT.

OctetStringr/w

Constraints:
range: 0-126

.1.3.6.1.4.1.25506.2.84.1.3.1.1

hh3cHPEOCCltFwVersion

EOC firmware version. If the object length is
zero, it means the version is unknown.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.84.1.3.1.2

hh3cHPEOCCltLinkState

The cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the …

Enumeration

Enumerated Values:

1	physicaldown
2	linkdown
3	linkup
4	loopback

.1.3.6.1.4.1.25506.2.84.1.3.1.3

hh3cHPEOCCnuSysManTable

table

.1.3.6.1.4.1.25506.2.84.1.4 · 1 row entry · 3 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCCnuSysManTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCCnuSysManTable'

This table implements the management of CNUs.

hh3cHPEOCCnuSysManEntry row .1.3.6.1.4.1.25506.2.84.1.4.1

The entry of the table hh3cHPEOCCnuSysManTable.

Indexes

IF-MIBifIndex

Column Syntax OID

hh3cHPEOCCnuBcastControl

Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.84.1.4.1.1

hh3cHPEOCCnuAnonymStatus

Anonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.84.1.4.1.2

hh3cHPEOCCnuMacLimit

Configure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address e…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.84.1.4.1.3

hh3cHPEOCCableInfoTable

table

.1.3.6.1.4.1.25506.2.84.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCCableInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCCableInfoTable'

This table defines the primary parameters of the
cable information.

hh3cHPEOCCableInfoEntry row .1.3.6.1.4.1.25506.2.84.2.1.1

The entry of the table hh3cHPEOCCableInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cHPEOCFECErrors The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will …	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.84.2.1.1.1`
hh3cHPEOCAvgBitsPerCarrier The cable port's average bits per carrier.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.84.2.1.1.2`
hh3cHPEOCAvgSNRPerCarrier The cable port's signal noise ratio(SNR) bits per carrier.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.84.2.1.1.3`
hh3cHPEOCAvgInPBCRCErrors The input PB CRC errors on average.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.84.2.1.1.4`
hh3cHPEOCInTotalPkts The total number of packets(including bad packets) received on this interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.84.2.1.1.5`
hh3cHPEOCAvgOutPower The cable port's power sent on average, the unit is db.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.84.2.1.1.6`
hh3cHPEOCAvgOutPBCRCErrors The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.84.2.1.1.7`
hh3cHPEOCOutTotalPkts The total count of the packets(including bad packets) sent on this interface.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.25506.2.84.2.1.1.8`

hh3cHPEOCBitPerSymbolTable

table

.1.3.6.1.4.1.25506.2.84.2.2 · 1 row entry · 2 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCBitPerSymbolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCBitPerSymbolTable'

This table defines the bits per symbol parameters of the
cable line.

hh3cHPEOCBitPerSymbolEntry row .1.3.6.1.4.1.25506.2.84.2.2.1

The entry of the table hh3cHPEOCBitPerSymbolTable.

Indexes

IF-MIBifIndex hh3cHPEOCBitPerSymbolIndex

Column	Syntax	OID
hh3cHPEOCBitPerSymbolIndex The index of the hh3cHPEOCBitPerSymbolTable.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.25506.2.84.2.2.1.1`
hh3cHPEOCBitPerSymbol hh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.	OctetString	`.1.3.6.1.4.1.25506.2.84.2.2.1.2`

hh3cHPEOCTemplateGlobalTable

table

.1.3.6.1.4.1.25506.2.84.3.1 · 1 row entry · 10 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCTemplateGlobalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCTemplateGlobalTable'

This table defines the global parameters of the
Template information.

hh3cHPEOCTemplateGlobalEntry row .1.3.6.1.4.1.25506.2.84.3.1.1

The entry of the table hh3cHPEOCTemplateGlobalTable.

Indexes

hh3cHPEOCTemplateIndex

Column Syntax OID

hh3cHPEOCTemplateIndex

The index of cable Template.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.3.1.1.1

hh3cHPEOCTemplateType

The cable Template's type, can not change after create it.

Enumerationr/w

Enumerated Values:

1	switch
2	gateway

.1.3.6.1.4.1.25506.2.84.3.1.1.2

hh3cHPEOCTemplateName

The cable Template's name, it's recommended to set it
uniquely and understandably. Length: 1 to 15 characters.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.84.3.1.1.3

hh3cHPEOCTemplateDescr

The cable Template's description. Length: 0 to 63 characters.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.84.3.1.1.4

hh3cHPEOCTemplateCnuMaxDownBW

Maximum downstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.3.1.1.5

hh3cHPEOCTemplateCnuMaxUpBW

Maximum upstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.3.1.1.6

hh3cHPEOCTemplateCnuBcastControl

Broadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.84.3.1.1.7

hh3cHPEOCTemplateCnuMacLimit

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.84.3.1.1.8

hh3cHPEOCTemplateCb201VlanEn

Use for Cb201 cnu only.
true(1) - Enable vlan insert function.
false(2) - Disable vlan insert function.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.84.3.1.1.9

hh3cHPEOCTemplateRowStatus

Operation status.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.25506.2.84.3.1.1.10

hh3cHPEOCTemplateSwitchTable

table

.1.3.6.1.4.1.25506.2.84.3.2 · 1 row entry · 11 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCTemplateSwitchTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCTemplateSwitchTable'

This table defines the port parameters of the
switch type cnu. it's not affect on the type of gateway Template.

hh3cHPEOCTemplateSwitchEntry row .1.3.6.1.4.1.25506.2.84.3.2.1

The entry of the table hh3cHPEOCTemplateSwitchTable.

Indexes

hh3cHPEOCTemplateIndex hh3cHPEOCTemplateUniIndex

Column Syntax OID

hh3cHPEOCTemplateUniIndex

The index value which uniquely identifies the FE
interface of the CNU.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.3.2.1.1

hh3cHPEOCTemplateUniSpeed

User network interface speed.

Enumerationr/w

Enumerated Values:

1	auto
10	s10M
100	s100M

.1.3.6.1.4.1.25506.2.84.3.2.1.2

hh3cHPEOCTemplateUniDuplex

User network interface mode.

Enumerationr/w

Enumerated Values:

1	full
2	half
3	auto

.1.3.6.1.4.1.25506.2.84.3.2.1.3

hh3cHPEOCTemplateUniPriority

The default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.25506.2.84.3.2.1.4

hh3cHPEOCTemplateUniFlowControl

Flow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.25506.2.84.3.2.1.5

hh3cHPEOCTemplateUniUpLineRate

The max speed upload in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.84.3.2.1.6

hh3cHPEOCTemplateUniDownLineRate

The max speed download in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.84.3.2.1.7

hh3cHPEOCTemplateUniAdminStatus

Control if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.

Enumerationr/w

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.25506.2.84.3.2.1.8

hh3cHPEOCTemplateUniVLANType

port vlan types.
hybrid (3) port can carry multiple VLANs.

Enumerationr/w

Enumerated Values:

1	access
2	trunk
3	hybrid

.1.3.6.1.4.1.25506.2.84.3.2.1.9

hh3cHPEOCTemplateUniPvid

The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.25506.2.84.3.2.1.10

hh3cHPEOCTemplateUniVlanTag

VLAN is set tagged or untagged.

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged

.1.3.6.1.4.1.25506.2.84.3.2.1.11

hh3cHPEOCCnuAccessTable

table

.1.3.6.1.4.1.25506.2.84.4.1 · 1 row entry · 8 columns

Open in standard view

Uses the hh3c variant from /opt/observium/mibs/hh3c.

Command help

Walk hh3cHPEOCCnuAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-HPEOC-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-HPEOC-MIB::hh3cHPEOCCnuAccessTable'

This table defines the global parameters of the
cnu type permitting to access.

hh3cHPEOCCnuAccessEntry row .1.3.6.1.4.1.25506.2.84.4.1.1

The entry of the table hh3cHPEOCCnuAccessTable.

Indexes

hh3cHPEOCCnuAccessIndex

Column Syntax OID

hh3cHPEOCCnuAccessIndex

The index value which uniquely identifies the
manuinfo of the CNU.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.4.1.1.1

hh3cHPEOCCnuHFID

The Cnu's HFID. Every type Cnu has it's unique HFID.
Length: 1 to 64 characters.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.84.4.1.1.2

hh3cHPEOCManuInfo

The Cnu's manufactory infofamiont.
Length: 0 to 63 characters.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.25506.2.84.4.1.1.3

hh3cHPEOCCnuType

The Cnu's function type.

Enumerationr/w

Enumerated Values:

1	switch
2	gateway

.1.3.6.1.4.1.25506.2.84.4.1.1.4

hh3cHPEOCCnuSwitchType

The Cnu's switch chip type. It's useless for gataway type cnu.

Enumerationr/w

Enumerated Values:

1	rtl8306e
2	ar8236
3	mv6061
4	mv6031

.1.3.6.1.4.1.25506.2.84.4.1.1.5

hh3cHPEOCCnuUniNum

Uni number of the Cnu. It's useless for gataway type cnu.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.84.4.1.1.6

hh3cHPEOCCnuPhy2Uni

Reflection from phy port to uni port of the cnu.
It's useless for gataway type cnu.
For example, phy port 0,1,2,3 is reflect to uni port
1,2,3,4, then the value of this mib is {0,1,2,3}

OctetStringr/w

.1.3.6.1.4.1.25506.2.84.4.1.1.7

hh3cHPEOCCnuAccessRowStatus

Operation status.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.25506.2.84.4.1.1.8