HH3C-ERPS-MIB

        This MIB defines objects for managing ERPS.
ERPS is a feature developed to address the slow convergence
issue with STP.
It provides link redundancy and fast convergence in
a ring network, allowing the backup link to take over quickly
when the primary link fails.
    
Source file
HH3C-ERPS-MIB
Last revised
Identity
hh3cErps
Base OID
1.3.6.1.4.1.25506.2.225
Imported Objects
HH3C-OID-MIB hh3cCommon
IF-MIB ifDescr ifIndex
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
Net-SNMP examples using the hh3c MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HH3C-ERPS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HH3C-ERPS-MIB::hh3cErps'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-ERPS-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-ERPS-MIB::hh3cErps'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (5)
.1.3.6.1.4.1.25506.2.225
.1.3.6.1.4.1.25506.2.225.1
.1.3.6.1.4.1.25506.2.225.1.0
.1.3.6.1.4.1.25506.2.225.1.1
Integer32
.1.3.6.1.4.1.25506.2.225.1.1.1
Dependencies (8) 3 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. RFC1155-SMIrfc
  2. HH3C-OID-MIBhh3c
  3. SNMPv2-SMIrfc
  4. SNMPv2-TCrfc
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. HH3C-ERPS-MIBhh3cselected
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.25506.2.225.1.0.1
A trap message is generated when the status of a port
in an ERPS ring changes to forwarding.
.1.3.6.1.4.1.25506.2.225.1.0.2
A trap message is generated when the status of a port
in an ERPS ring changes to discarding.