HH3C-EPON-MIB Table View

This table defines system related parameters.

hh3cEponSysManEntry row .1.3.6.1.4.1.25506.2.42.1.1.16.1

The entry of the table hh3cEponSysManTable.

Indexes

hh3cEponSlotIndex

Column	Syntax	OID
hh3cEponSlotIndex Slot Index, the index of hh3cEponSysManTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.16.1.1
hh3cEponModeSwitch cmode - epon standard mode. hmode - private mode.	Enumerationr/w Enumerated Values: 1 cmode 2 hmode	.1.3.6.1.4.1.25506.2.42.1.1.16.1.2
hh3cEponAutomaticMode Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable aut…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.1.16.1.3
hh3cEponOamDiscoveryTimeout Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.16.1.4
hh3cEponEncryptionNoReplyTimeOut Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.16.1.5
hh3cEponEncryptionUpdateTime Encryption key update timer for all ONUs on slot, indicated by hh3cEponSlotIndex, ranging from 1 to 255, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.16.1.6
hh3cEponAutoBindStatus enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.1.16.1.7
hh3cEponAutoBindType Set auto binding type, which can be combined. If auto binding is disabled, 0 is returned.	Bitsr/w Enumerated Values: 0 mac 1 loid 2 loidPassword	.1.3.6.1.4.1.25506.2.42.1.1.16.1.8

EPON auto update ONU application configuration.

hh3cEponAutoUpdateEntry row .1.3.6.1.4.1.25506.2.42.1.1.17.1

The entry of the table hh3cEponAutoUpdateTable.

Indexes

hh3cEponSlotIndex

Column	Syntax	OID
hh3cEponAutoUpdateFileName The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.1.17.1.1
hh3cEponAutoUpdateSchedStatus The status of schedule update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.1.17.1.2
hh3cEponAutoUpdateSchedTime The schedule update timing configuration is related to the hh3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.1.17.1.3
hh3cEponAutoUpdateSchedType The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.	Enumerationr/w Enumerated Values: 1 daily 2 weekly 3 comingdate	.1.3.6.1.4.1.25506.2.42.1.1.17.1.4
hh3cEponAutoUpdateRealTimeStatus The status of real time update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.1.17.1.5

Next OUI index table.

hh3cEponOuiIndexNextEntry row .1.3.6.1.4.1.25506.2.42.1.1.18.1

The entry of the table hh3cEponOuiIndexNextTable.

Indexes

hh3cEponSlotIndex

Column	Syntax	OID
hh3cEponOuiIndexNext This object contains an appropriate value to be used for hh3cEponOuiIndex when creating rows in the hh3cEponOuiTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.18.1.1

List of OUI and OAM supported by OLT.

hh3cEponOuiEntry row .1.3.6.1.4.1.25506.2.42.1.1.19.1

The entry of the table hh3cEponOuiTable.

Indexes

hh3cEponSlotIndex hh3cEponOuiIndex

Column	Syntax	OID
hh3cEponOuiIndex The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.19.1.1
hh3cEponOuiValue OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.25506.2.42.1.1.19.1.2
hh3cEponOamVersion Version of OAM protocol defined by the organization denoted by OUI.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.1.19.1.3
hh3cEponOuiRowStatus The status of this table entry. Only active, createAndGo, and destroy are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.42.1.1.19.1.4

Multicast control global configuration.

hh3cEponMulticastControlEntry row .1.3.6.1.4.1.25506.2.42.1.1.20.1

The entry of the table hh3cEponMulticastControlTable.

Indexes

hh3cEponMulticastVlanId

Column	Syntax	OID
hh3cEponMulticastVlanId The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.1.20.1.1
hh3cEponMulticastAddressList The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.1.20.1.2
hh3cEponMulticastStatus The status of this table entry. Only active, createAndGo, and destroy are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.42.1.1.20.1.3

The table contains the configurations for managing the ONU MAC blacklist.

hh3cEponOnuBlackListMacEntry row .1.3.6.1.4.1.25506.2.42.1.1.23.1

The entry of the table hh3cEponOnuBlackListMacTable.

Indexes

hh3cEponOnuBlackListMac

Column	Syntax	OID
hh3cEponOnuBlackListMac The ONU MAC blacklist value. This value is used to specify the blacklist MAC which is bound by the ONU interface.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.1.23.1.1
hh3cEponOnuBlackListMacRowStatus This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.42.1.1.23.1.2

The table contains the configurations for managing the ONU LOID blacklist.

hh3cEponOnuBlackListLoidEntry row .1.3.6.1.4.1.25506.2.42.1.1.24.1

The entry of the table hh3cEponOnuBlackListLoidTable.

Indexes

hh3cEponOnuBlackListLoid

Column	Syntax	OID
hh3cEponOnuBlackListLoid The ONU LOID blacklist value. This value is used to specify the blacklist LOID which is bound by the ONU interface.	OctetString Constraints: range: 1-24	.1.3.6.1.4.1.25506.2.42.1.1.24.1.1
hh3cEponOnuBlackListLoidRowStatus This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.42.1.1.24.1.2

This table defines several OLT system parameters:
(1)laser on time
(2)laser off time
(3)whether multiple copy broadcast
(4)whether discard packet
(5)self test
(6)self test result

hh3cOltSysManEntry row .1.3.6.1.4.1.25506.2.42.1.3.1.1

The entry of the table hh3cOltSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOltLaserOnTime The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.1.1.1
hh3cOltLaserOffTime The laser off time of the ONUs during the discovery process, measured in TQ.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.1.1.2
hh3cOltMultiCopyBrdCast true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP cont…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.1.1.3
hh3cOltEnableDiscardPacket Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.1.1.4
hh3cOltSelfTest selftest(1): Test OLT to check whether it's OK.	Enumerationr/w Enumerated Values: 1 selftest	.1.3.6.1.4.1.25506.2.42.1.3.1.1.5
hh3cOltSelfTestResult The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.	Enumeration Enumerated Values: 1 other 2 ok 3 fail	.1.3.6.1.4.1.25506.2.42.1.3.1.1.6
hh3cOltMaxRtt Set the max Round Trip Time of this OLT.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.42.1.3.1.1.7
hh3cOltAuthMode Set the auth mode of this OLT, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.	Bitsr/w Enumerated Values: 0 mac 1 loid 2 loidPassword	.1.3.6.1.4.1.25506.2.42.1.3.1.1.8
hh3cOltOnuBindOneToOne Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.1.1.9

Primary status of the specified OLT.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified OLT
(hh3cOltFirmMajorVersion, hh3cOltFirmMinorVersion,
hh3cOltHardMajorVersion, hh3cOltHardMinorVersion)
(2)Several physical capabilities of an OLT device.
(hh3cOltAgcLockTime, hh3cOltAgcCdrTime)
(3)The operation(activation) status of an OLT.
(hh3cOltMacAddress, hh3cOltWorkMode)

hh3cOltInfoEntry row .1.3.6.1.4.1.25506.2.42.1.3.2.1

The entry of the table hh3cOltInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOltFirmMajorVersion OLT firmware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.3.2.1.1
hh3cOltFirmMinorVersion OLT firmware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.3.2.1.2
hh3cOltHardMajorVersion OLT hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.3.2.1.3
hh3cOltHardMinorVersion OLT hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.3.2.1.4
hh3cOltAgcLockTime PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.2.1.5
hh3cOltAgcCdrTime PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.2.1.6
hh3cOltMacAddress OLT MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.3.2.1.7
hh3cOltWorkMode The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.	Enumeration Enumerated Values: 1 other 2 open 3 reset 4 closed	.1.3.6.1.4.1.25506.2.42.1.3.2.1.8
hh3cOltOpticalPowerTx The optical power transmitted by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.2.1.9
hh3cOltOpticalPowerRx The burst optical power received by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.2.1.10

This table defines the primary parameters of the
Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.

hh3cOltDbaManEntry row .1.3.6.1.4.1.25506.2.42.1.3.3.1

The entry of the table hh3cOltDbaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOltDbaEnabledType Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorith…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.25506.2.42.1.3.3.1.1
hh3cOltDbaDiscoveryLength Discovery length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.3.1.2
hh3cOltDbaDiscovryFrequency How often should the OLT send discovery frames to the ONUs, measured in grant cycles.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.3.1.3
hh3cOltDbaCycleLength The grant cycle length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.3.1.4
hh3cOltDbaVersion DBA version of the OLT.	OctetString	.1.3.6.1.4.1.25506.2.42.1.3.3.1.5
hh3cOltDbaUpdate Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hh3cEponDbaUpdateFileName.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.25506.2.42.1.3.3.1.6
hh3cOltDbaUpdateResult The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist…	Enumeration Enumerated Values: 1 other 2 ok 3 fail 4 fileNotExist 5 notSetFilename	.1.3.6.1.4.1.25506.2.42.1.3.3.1.7

The table defines the alarm threshold of OLT.

hh3cOltPortAlarmThresholdEntry row .1.3.6.1.4.1.25506.2.42.1.3.4.1

The entry of the table hh3cOltPortAlarmThresholdTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOltPortAlarmBerEnabled Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.1
hh3cOltPortAlarmBerDirect Traffic direction to monitor for BER alarm.	Enumerationr/w Enumerated Values: 1 berUplink 2 berDownlink 3 berAll	.1.3.6.1.4.1.25506.2.42.1.3.4.1.2
hh3cOltPortAlarmBerThreshold BER threshold exceed which the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.4.1.3
hh3cOltPortAlarmFerEnabled Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.4
hh3cOltPortAlarmFerDirect Traffic direction to monitor for FER alarm.	Enumerationr/w Enumerated Values: 1 ferUplink 2 ferDownlink 3 ferAll	.1.3.6.1.4.1.25506.2.42.1.3.4.1.5
hh3cOltPortAlarmFerThreshold Frame error rate exceed threshold then the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.4.1.6
hh3cOltPortAlarmLlidMismatchEnabled Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.7
hh3cOltPortAlarmLlidMismatchThreshold The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.4.1.8
hh3cOltPortAlarmRemoteStableEnabled Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.9
hh3cOltPortAlarmLocalStableEnabled Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.10
hh3cOltPortAlarmRegistrationEnabled Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.11
hh3cOltPortAlarmOamDisconnectionEnabled Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.12
hh3cOltPortAlarmEncryptionKeyEnabled Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.13
hh3cOltPortAlarmVendorSpecificEnabled Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.14
hh3cOltPortAlarmRegExcessEnabled Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.15
hh3cOltPortAlarmDFEEnabled Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.4.1.16

This table is used for getting silent ONU information of OLT.

hh3cOnuSilentEntry row .1.3.6.1.4.1.25506.2.42.1.3.21.1

The entry of the table hh3cOnuSilentTable.

Indexes

IF-MIBifIndex hh3cOnuSilentMacAddr

Column	Syntax	OID
hh3cOnuSilentMacAddr The MAC address of silent ONUs in OLT.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.3.21.1.1
hh3cOnuSilentTime The aging time of a silent ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.21.1.2

The table containing configurations to manage ONU interface(s)
based on OLT interface.

hh3cOltUsingOnuEntry row .1.3.6.1.4.1.25506.2.42.1.3.22.1

The entry of the table hh3cOltUsingOnuTable.

Indexes

IF-MIBifIndex hh3cOltUsingOnuNum

Column	Syntax	OID
hh3cOltUsingOnuNum The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.25506.2.42.1.3.22.1.1
hh3cOltUsingOnuIfIndex The ifIndex of the ONU interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.22.1.2
hh3cOltUsingOnuRowStatus This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.42.1.3.22.1.3

This table is used for getting silent ONU's LOID information of an OLT.

hh3cOnuSilentLoidEntry row .1.3.6.1.4.1.25506.2.42.1.3.23.1

The entry of the table hh3cOnuSilentLoidTable.

Indexes

IF-MIBifIndex hh3cOnuSilentLoid

Column	Syntax	OID
hh3cOnuSilentLoid The LOID of a silent ONU in an OLT.	OctetString Constraints: range: 1-24	.1.3.6.1.4.1.25506.2.42.1.3.23.1.1
hh3cOnuSilentLoidTime The aging time of a silent ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.3.23.1.2

This table is used for setting ONU's Tx power on an OLT.

hh3cOltTransceiverTxPowerEntry row .1.3.6.1.4.1.25506.2.42.1.3.24.1

The entry of the table hh3cOltTransceiverTxPowerTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOltTransTxPwrTransId The transceiver ID of an ONU in an OLT.	Enumerationr/w Enumerated Values: 0 main 1 standby 2 all	.1.3.6.1.4.1.25506.2.42.1.3.24.1.1
hh3cOltTransTxPwrOffTime The turnoff time of the transceiver Tx power.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.42.1.3.24.1.2
hh3cOltTransTxPwrIsAllOnu Setting all ONUs' transceiver Tx power or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.3.24.1.3
hh3cOltTransTxPwrOnuIfList ONUs' ifIndex for which the transceiver Tx power is to be set.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.25506.2.42.1.3.24.1.4

This table implements the following functions for ONUs:
1. Encrypting all downstream/upstream and
downstream directions traffic destined to and
originated from a specific LLID
(ONU in current implementation).
2. Restart a process of ONU authentication, using
the OLT (IEEE 802.1x) authenticator.

hh3cOnuSysManEntry row .1.3.6.1.4.1.25506.2.42.1.5.1.1

The entry of the table hh3cOnuSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuEncryptMan Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. I…	Enumerationr/w Enumerated Values: 1 off 2 downlink 3 updownlink	.1.3.6.1.4.1.25506.2.42.1.5.1.1.1
hh3cOnuReAuthorize Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remai…	Enumerationr/w Enumerated Values: 1 reAuthorize	.1.3.6.1.4.1.25506.2.42.1.5.1.1.2
hh3cOnuMulticastFilterStatus true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.1.1.3
hh3cOnuDbaReportQueueSetNumber The number of queue sets reported in MPCP report frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.1.1.4
hh3cOnuRemoteFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error co…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.5.1.1.5
hh3cOnuPortBerStatus enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.5.1.1.6
hh3cOnuReset Reboot ONU.	Enumerationr/w Enumerated Values: 1 reset	.1.3.6.1.4.1.25506.2.42.1.5.1.1.7
hh3cOnuMulticastControlMode igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.	Enumerationr/w Enumerated Values: 1 igmpsnooping 2 multicastcontrol	.1.3.6.1.4.1.25506.2.42.1.5.1.1.8
hh3cOnuAccessVlan The VLAN ID assigned to untagged frames received on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.1.1.9
hh3cOnuEncryptKey The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.5.1.1.10
hh3cOnuUniUpDownTrapStatus true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.1.1.11
hh3cOnuFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.5.1.1.12
hh3cOnuMcastCtrlHostAgingTime The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.1.1.13
hh3cOnuMulticastFastLeaveEnable true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.1.1.14
hh3cOnuPortIsolateEnable true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.1.1.15
hh3cOnuMacAddressTimer no-aging(0) - Disable aging. others - Aging time(seconds).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.42.1.5.1.1.16

LLID link test applying to the ONU only including delay
measurement option.  The command tests a link to a single
LLID over a period of time or once, using a variable
number of measurement frames.  The length of the measurement
frames is also parameterized.  The test uses a loopback
mode of the ONU to return each measurement frame,
loopback activation is done using randomly patterned
OAM Protocol Data Unit(PDU) frames.

hh3cOnuLinkTestEntry row .1.3.6.1.4.1.25506.2.42.1.5.2.1

The entry of hh3cOnuLinkTestEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuLinkTestFrameNum Exact number of measurement frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.1
hh3cOnuLinkTestFrameSize Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is dis…	Integer32r/w Constraints: range: 60-1514	.1.3.6.1.4.1.25506.2.42.1.5.2.1.2
hh3cOnuLinkTestDelay true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measu…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.2.1.3
hh3cOnuLinkTestVlanTag true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.2.1.4
hh3cOnuLinkTestVlanPriority VLAN priority: 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.25506.2.42.1.5.2.1.5
hh3cOnuLinkTestVlanTagID VLAN ID: 1-4094.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.25506.2.42.1.5.2.1.6
hh3cOnuLinkTestResultSentFrameNum The total number of frames sent during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.7
hh3cOnuLinkTestResultRetFrameNum The total number of frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.8
hh3cOnuLinkTestResultRetErrFrameNum The total number of error frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.9
hh3cOnuLinkTestResultMinDelay The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.10
hh3cOnuLinkTestResultMeanDelay The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.11
hh3cOnuLinkTestResultMaxDelay The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.2.1.12

Set bandwidth policy parameters(restrictions)for a LLID
(only for the ONU).  Default policies are set to disable.
Policy parameters will be erased upon LLID network disconnection.

hh3cOnuBandWidthEntry row .1.3.6.1.4.1.25506.2.42.1.5.3.1

The entry of table hh3cOnuBandWidthTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuDownStreamBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.1
hh3cOnuDownStreamMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.3.1.2
hh3cOnuDownStreamMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.25506.2.42.1.5.3.1.3
hh3cOnuDownStreamHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.4
hh3cOnuDownStreamShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.5
hh3cOnuP2PBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.6
hh3cOnuP2PMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.25506.2.42.1.5.3.1.7
hh3cOnuP2PMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.25506.2.42.1.5.3.1.8
hh3cOnuP2PHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.9
hh3cOnuP2PShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.3.1.10

Two types of DBA algorithm are supported in the ONU.
The internal SLA based algorithm is always activated.
This table defines the primary parameter about the
internal SLA algorithm.

hh3cOnuSlaManEntry row .1.3.6.1.4.1.25506.2.42.1.5.4.1

The entry of table hh3cOnuSlaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuSlaMaxBandWidth Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.1
hh3cOnuSlaMinBandWidth Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.2
hh3cOnuSlaBandWidthStepVal Granularity of bandwidth - measured in Kbit/s. The value of hh3cOnuSlaMaxBandWidth and hh3cOnuSlaMinBandWidth should be the multiple of the value of this object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.3
hh3cOnuSlaDelay low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.	Enumerationr/w Enumerated Values: 1 low 2 high	.1.3.6.1.4.1.25506.2.42.1.5.4.1.4
hh3cOnuSlaFixedBandWidth Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.5
hh3cOnuSlaPriorityClass Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.6
hh3cOnuSlaFixedPacketSize Fixed packet size - measured in byte. The value of this object should be valid when hh3cOnuSlaFixedBandWidth is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.7
hh3cOnuSlaWrrBandWidth The WRR weight will be used to compute the remaining bandwidth allocation after each CIR has been guaranteed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.4.1.8

Primary status of the specified ONU.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified ONU
(hh3cOnuHardMajorVersion, hh3cOnuHardMinorVersion,
hh3cOnuUniMacType)
(2)Several physical capabilities of the ONU.
(hh3cOnuLaserOnTime, hh3cOnuLaserOffTime,
hh3cOnuGrantFifoDep.)
(3)The operation(activation) status of the ONU.
(hh3cOnuWorkMode)

hh3cOnuInfoEntry row .1.3.6.1.4.1.25506.2.42.1.5.5.1

The entry of the hh3cOnuInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuHardMajorVersion ONU hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.1
hh3cOnuHardMinorVersion ONU hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.2
hh3cOnuSoftwareVersion ONU software version.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.3
hh3cOnuUniMacType ONU User Network Interface(UNI) port MAC type.	Enumeration Enumerated Values: 1 other 2 mii 3 gmii 4 tbi	.1.3.6.1.4.1.25506.2.42.1.5.5.1.4
hh3cOnuLaserOnTime The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOnTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.5.1.5
hh3cOnuLaserOffTime The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOffTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.5.1.6
hh3cOnuGrantFifoDep Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.	Integer32 Constraints: range: 2147483647-2147483647 range: 1-255	.1.3.6.1.4.1.25506.2.42.1.5.5.1.7
hh3cOnuWorkMode The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registe…	Enumeration Enumerated Values: 1 other 2 on 3 pending 4 off	.1.3.6.1.4.1.25506.2.42.1.5.5.1.8
hh3cOnuPCBVersion ONU PCB version.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.9
hh3cOnuRtt The signal round-trip-time(RTT) received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.42.1.5.5.1.10
hh3cOnuEEPROMVersion ONU EEPROM version.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.11
hh3cOnuRegType ONU registered type.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.12
hh3cOnuHostType ONU host type.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.13
hh3cOnuDistance The distance between OLT and ONU, measured in meter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.5.1.14
hh3cOnuLlid The link layer identifier, which uniquely identifies the ONU of a specific OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.5.1.15
hh3cOnuVendorId ONU vendor ID.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.16
hh3cOnuFirmwareVersion ONU firmware version.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.5.1.17
hh3cOnuOpticalPowerReceivedByOlt The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.5.1.18
hh3cOnuInfoMac ONU's MAC.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.5.1.19
hh3cOnuInfoLoid ONU's LOID.	OctetString Constraints: range: 0-24	.1.3.6.1.4.1.25506.2.42.1.5.5.1.20

This table used for getting MAC address information of ONU.

hh3cOnuMacAddrInfoEntry row .1.3.6.1.4.1.25506.2.42.1.5.6.1

The entry of the hh3cEponOnuMacAddrInfoTable.

Indexes

IF-MIBifIndex hh3cOnuMacIndex

Column	Syntax	OID
hh3cOnuMacIndex The index of ONUs in one OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.6.1.1
hh3cOnuMacAddrFlag The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one…	Enumeration Enumerated Values: 1 bound 2 registered 3 run 4 regIncorrect	.1.3.6.1.4.1.25506.2.42.1.5.6.1.2
hh3cOnuMacAddress The MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.6.1.3

This table implements the following functions for ONUs:
Bind MAC of ONU.

hh3cOnuBindMacAddrEntry row .1.3.6.1.4.1.25506.2.42.1.5.7.1

The entry of the table hh3cOnuBindMacAddrTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuBindMacAddress Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and c…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.7.1.1
hh3cOnuBindType Set the binding type with the ONU which is confined to the index of hh3cEponOnuTypeDescr.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.7.1.2
hh3cOnuBindLoid Bind the LOID of ONU. While the LOID is not bound, the ONU can not go into effect and configurations can not be set.	OctetStringr/w Constraints: range: 0-24	.1.3.6.1.4.1.25506.2.42.1.5.7.1.3
hh3cOnuBindPassword The password of LOID by using LOID-PASSWORD binding type to bind ONU. A zero-length string will be returned when reading.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.25506.2.42.1.5.7.1.4

This table implements the following functions for ONUs:
1. Update the ONU firmware.
2. Result of update ONU firmware.

hh3cOnuFirmwareUpdateEntry row .1.3.6.1.4.1.25506.2.42.1.5.8.1

The entry of the table hh3cOnuFirmwareUpdateTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuUpdate update(1): Update the ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.25506.2.42.1.5.8.1.1
hh3cOnuUpdateResult The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file doe…	Enumeration Enumerated Values: 1 updating 2 ok 3 fail 4 fileNotExist 5 notSetFilename 6 fileNotMatchONU 7 timeout 8 otherError	.1.3.6.1.4.1.25506.2.42.1.5.8.1.2
hh3cOnuUpdateFileName The filename of the ONU firmware to be updated. Note that the filename must contain the file path.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.5.8.1.3
hh3cOnuUpdateProtType private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.	Enumerationr/w Enumerated Values: 0 private 1 ctc	.1.3.6.1.4.1.25506.2.42.1.5.8.1.4
hh3cOnuUpdateStartTime The start time of the ONU update every day. Using HH:MM as format.	OctetStringr/w Constraints: range: 0-5	.1.3.6.1.4.1.25506.2.42.1.5.8.1.5
hh3cOnuUpdateDuration The duration of the ONU update.	Integer32r/w Constraints: range: 0-1439	.1.3.6.1.4.1.25506.2.42.1.5.8.1.6

This table is used for getting ONU bind type in current version.

hh3cEponOnuTypeManEntry row .1.3.6.1.4.1.25506.2.42.1.5.15.1

The entry of the hh3cEponOnuTypeManTable.

Indexes

hh3cEponOnuTypeIndex

Column	Syntax	OID
hh3cEponOnuTypeIndex The ONU type index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.15.1.1
hh3cEponOnuTypeDescr The ONU type description which can be used to bind ONU in current version. the value of hh3cOnuBindType can be configured by the index of hh3cEponOnuTypeDescr.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.15.1.2

This table implements the following functions:
(1)Manage packet priority trust mode.
(2)Manage packet queue-scheduler mode.

hh3cOnuPacketManEntry row .1.3.6.1.4.1.25506.2.42.1.5.16.1

The entry of the hh3cOnuPacketManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuPriorityTrust The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.	Enumerationr/w Enumerated Values: 1 dscp 2 ipprecedence 3 cos	.1.3.6.1.4.1.25506.2.42.1.5.16.1.1
hh3cOnuQueueScheduler The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.	Enumerationr/w Enumerated Values: 1 spq 2 wfq	.1.3.6.1.4.1.25506.2.42.1.5.16.1.2

This table implements the following functions:
(1)Manage STP status.
(2)Manage IGMP-snooping.
(3)Manage DHCP-snooping.

hh3cOnuProtocolEntry row .1.3.6.1.4.1.25506.2.42.1.5.17.1

The entry of hh3cOnuProtocolTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuStpStatus true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.1
hh3cOnuIgmpSnoopingStatus true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.2
hh3cOnuDhcpsnoopingOption82 true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.3
hh3cOnuDhcpsnooping true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.4
hh3cOnuPppoe true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.5
hh3cOnuIgmpSnoopingHostAgingT Set the host aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.17.1.6
hh3cOnuIgmpSnoopingMaxRespT Set the max response time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.17.1.7
hh3cOnuIgmpSnoopingRouterAgingT Set the router aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.17.1.8
hh3cOnuIgmpSnoopingAggReportS true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.9
hh3cOnuIgmpSnoopingAggLeaveS true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.17.1.10

This table implements the following functions:
(1)Manage 802.1x account.
(2)Manage 802.1x password.
ONU will be authorized to send and receive frames when the
account and the password are all right, otherwise this ONU
will be unavailable.

hh3cOnuDot1xEntry row .1.3.6.1.4.1.25506.2.42.1.5.18.1

The entry of the hh3cOnuDot1xTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuDot1xAccount ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hh3cOnuDot1xPassword.	OctetStringr/w	.1.3.6.1.4.1.25506.2.42.1.5.18.1.1
hh3cOnuDot1xPassword ONU 802.1X password. The object should be set together with hh3cOnuDot1xAccount.	OctetStringr/w	.1.3.6.1.4.1.25506.2.42.1.5.18.1.2

This table contains specific information of priority queue.

hh3cOnuPriorityQueueEntry row .1.3.6.1.4.1.25506.2.42.1.5.19.1

The entry of hh3cOnuPriorityQueueTable.

Indexes

IF-MIBifIndex hh3cOnuQueueDirection hh3cOnuQueueId

Column	Syntax	OID
hh3cOnuQueueDirection The direction of priority queue.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.25506.2.42.1.5.19.1.1
hh3cOnuQueueId The queue ID of priority queue.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.25506.2.42.1.5.19.1.2
hh3cOnuQueueSize The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.19.1.3

This table contains statistics of ONU port.

hh3cOnuCountEntry row .1.3.6.1.4.1.25506.2.42.1.5.20.1

The entry of hh3cOnuCountTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuInCRCErrPkts The total number of frames received with bad CRC checksum.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.42.1.5.20.1.1
hh3cOnuOutDroppedFrames The total number of frames dropped because of buffer failure.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.42.1.5.20.1.2

This table contains specific bandwidth information of ONU priority queue.

hh3cOnuQueueBandwidthEntry row .1.3.6.1.4.1.25506.2.42.1.5.22.1

The entry of hh3cOnuQueueBandwidthTable.

Indexes

IF-MIBifIndex hh3cOnuQueueDirection hh3cOnuQueueId

Column	Syntax	OID
hh3cOnuQueueMaxBandwidth The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.22.1.1
hh3cOnuQueueMaxBurstsize The maximum burst size of specific ONU priority queue, measured in 64Bytes.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.22.1.2
hh3cOnuQueuePolicyStatus true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.22.1.3

ONU IP address table.

hh3cOnuIpAddressEntry row .1.3.6.1.4.1.25506.2.42.1.5.23.1

The entry of hh3cOnuIpAddressTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuIpAddress The IP address assigned to the ONU.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.42.1.5.23.1.1
hh3cOnuIpAddressMask The mask of IP address denoted by hh3cOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.42.1.5.23.1.2
hh3cOnuIpAddressGateway The gateway of IP address denoted by hh3cOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.42.1.5.23.1.3
hh3cOnuDhcpallocate true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.23.1.4
hh3cOnuManageVID The management VLAN of ONU denoted by hh3cOnuManageVID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.23.1.5
hh3cOnuManageVlanIntfS The management interface status of ONU denoted by hh3cOnuManageVlanIntfS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.23.1.6

ONU vendor specific information of ONU.

hh3cOnuChipSetInfoEntry row .1.3.6.1.4.1.25506.2.42.1.5.24.1

The entry of hh3cOnuChipSetInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuChipSetVendorId Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.5.24.1.1
hh3cOnuChipSetModel Chip model, numbering(range from 0 to 0xFF) by the chip vendor.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.25506.2.42.1.5.24.1.2
hh3cOnuChipSetRevision Chip revision.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.24.1.3
hh3cOnuChipSetDesignDate Chip design date.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.25506.2.42.1.5.24.1.4

Capability of ONU.

hh3cOnuCapabilityEntry row .1.3.6.1.4.1.25506.2.42.1.5.25.1

The entry of the table hh3cOnuCapabilityTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuServiceSupported Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supp…	Bits Enumerated Values: 0 geinterfacesupport 1 feinterfacesupport 2 voipservicesupport 3 tdmservicesupport	.1.3.6.1.4.1.25506.2.42.1.5.25.1.1
hh3cOnuGEPortNumber The current gigabit ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.2
hh3cOnuFEPortNumber the current fast ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.3
hh3cOnuPOTSPortNumber The current POTS ports number supported by the ONU	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.4
hh3cOnuE1PortsNumber The current E1 ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.5
hh3cOnuUpstreamQueueNumber The number of upstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.6
hh3cOnuMaxUpstreamQueuePerPort The number of maximum upstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.7
hh3cOnuDownstreamQueueNumber The number of downstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.8
hh3cOnuMaxDownstreamQueuePerPort The number of maximum downstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.9
hh3cOnuBatteryBackup true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.25.1.10
hh3cOnuIgspFastLeaveSupported true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.25.1.11
hh3cOnuMCtrlFastLeaveSupported true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.42.1.5.25.1.12
hh3cOnuType ONU type: SFU(0) HGU(1) SBU(2) MDU(3) which is cassette equipment and uses Ethernet access as broadband MDU(4) which is small card equipment and uses Ethernet access as broadband MDU(5) which is small card equipment and…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.13
hh3cOnuMultiLLID (0) - Invalid value. (1) - ONU supports one LLID. other - ONU supports multiple LLIDs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.14
hh3cOnuProtectionType (0) - Not supported. (1) - ONU supports type C optical link protection. (2) - ONU supports type D optical link protection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.15
hh3cOnuPonIFNum (1) - ONU support one PON interface. (2) - ONU support two PON interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.16
hh3cOnuSlotNum The slot number of a card ONU. If the ONU is not card equipment, 0 is returned.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.17
hh3cOnuIPv6Supported (0) - ONU supports IPv6. (1) - ONU does not support IPv6.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.18
hh3cOnuPowerSupplyControl (0) - ONU does not support ONU power supply control. (1) - ONU supports Tx power supply control only. The Tx and Rx power supply can only be controlled together whereby Rx power supply is also shutdown when Tx power sup…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.19
hh3cOnuServiceSLA (1) - ONU does not support SLA services. (2~8) - ONU supports 2~8 SLA services.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.25.1.20

This table defines the information of DBA(dynamic bandwidth allocation)
report threshold contained in the MPCP report frames.

hh3cOnuDbaReportEntry row .1.3.6.1.4.1.25506.2.42.1.5.26.1

The entry of the table hh3cOnuDbaReportTable.

Indexes

IF-MIBifIndex hh3cOnuDbaReportQueueId

Column	Syntax	OID
hh3cOnuDbaReportQueueId The DBA report queue ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.26.1.1
hh3cOnuDbaReportThreshold The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.26.1.2
hh3cOnuDbaReportStatus enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.25506.2.42.1.5.26.1.3

Table of map of the COS to local-precedence.

hh3cOnuCosToLocalPrecedenceEntry row .1.3.6.1.4.1.25506.2.42.1.5.27.1

Configuration information of map of the COS to local precedence.

Indexes

IF-MIBifIndex hh3cOnuCosToLocalPrecedenceCosIndex

Column	Syntax	OID
hh3cOnuCosToLocalPrecedenceCosIndex Index of the map, obtains from packet cos value.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.25506.2.42.1.5.27.1.1
hh3cOnuCosToLocalPrecedenceValue Value of local precedence.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.25506.2.42.1.5.27.1.2

Table of ONU STP ports.

hh3cEponOnuStpPortEntry row .1.3.6.1.4.1.25506.2.42.1.5.28.1

Configuration information of ONU STP ports.

Indexes

IF-MIBifIndex hh3cEponStpPortIndex

Column	Syntax	OID
hh3cEponStpPortIndex The index of the STP ports.	Integer32 Constraints: range: 0-144	.1.3.6.1.4.1.25506.2.42.1.5.28.1.1
hh3cEponStpPortDescr The description of the STP ports.	OctetString	.1.3.6.1.4.1.25506.2.42.1.5.28.1.2
hh3cEponStpPortState The current state of the port (i.e. disabled, discarding, learning and forwarding).	Enumeration Enumerated Values: 1 disabled 2 discarding 3 learning 4 forwarding	.1.3.6.1.4.1.25506.2.42.1.5.28.1.3

This table is used for getting ONU physical information.

hh3cOnuPhysicalEntry row .1.3.6.1.4.1.25506.2.42.1.5.29.1

The entry of the hh3cOnuPhysicalTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hh3cOnuBridgeMac The bridge MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.29.1.1
hh3cOnuFirstPonMac The MAC address of ONU first PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.29.1.2
hh3cOnuFirstPonRegState The register state of ONU first PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.25506.2.42.1.5.29.1.3
hh3cOnuSecondPonMac The MAC address of ONU second PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.42.1.5.29.1.4
hh3cOnuSecondPonRegState The register state of ONU second PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.25506.2.42.1.5.29.1.5

This table is used for getting ONU SMLK information.

hh3cOnuSmlkEntry row .1.3.6.1.4.1.25506.2.42.1.5.30.1

The entry of the hh3cOnuSmlkTable.

Indexes

IF-MIBifIndex hh3cOnuSmlkGroupID

Column	Syntax	OID
hh3cOnuSmlkGroupID The SMLK group ID of ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.42.1.5.30.1.1
hh3cOnuSmlkFirstPonRole The role of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.25506.2.42.1.5.30.1.2
hh3cOnuSmlkFirstPonStatus The transmitting status of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.25506.2.42.1.5.30.1.3
hh3cOnuSmlkSecondPonRole The role of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.25506.2.42.1.5.30.1.4
hh3cOnuSmlkSecondPonStatus The transmitting status of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.25506.2.42.1.5.30.1.5