HH3C-DOT11-WIPS-MIB Table View

The table provides information about virtual security domains (VSDs).

hh3cDot11WIPSVsdEntry row .1.3.6.1.4.1.25506.2.75.15.1.1.1

Each entry contains information about one VSD.

Indexes

hh3cDot11WIPSVsdName

Column	Syntax	OID
hh3cDot11WIPSVsdName Represents the name of the virtual security domain.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.1.1.1
hh3cDot11WIPSVsdRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.1.1.2
hh3cDot11WIPSVsdDetectPolicy Represents the name of the attack detect policy attached to the VSD, zero-length for not config.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.25506.2.75.15.1.1.1.3
hh3cDot11WIPSVsdCtmPolicy Represents the name of the countermeasure policy attached to the VSD, zero-length for not config.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.25506.2.75.15.1.1.1.4
hh3cDot11WIPSVsdSignaturePolicy Represents the name of the signature policy attached to the VSD, zero-length for not config.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.25506.2.75.15.1.1.1.5
hh3cDot11WIPSVsdClasPolicy Represents the name of the malformed packet detect policy attached to the VSD,zero-length for not config.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.25506.2.75.15.1.1.1.6

The table defines sensors attached to VSDs.

hh3cDot11WIPSAp2VsdEntry row .1.3.6.1.4.1.25506.2.75.15.1.2.1

Each entry contains information about a sensor in a VSD.

Indexes

hh3cDot11WIPSAp2VsdApName

Column	Syntax	OID
hh3cDot11WIPSAp2VsdApName Represents the sensor name.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.25506.2.75.15.1.2.1.1
hh3cDot11WIPSAp2VsdRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.2.1.2
hh3cDot11WIPSAp2VsdVsdName Represents the name of a virtual security domain.	OctetStringr/w Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.2.1.3

The table contains the enable status of WIPS on radios of sensors.

hh3cDot11WIPSApRadioEntry row .1.3.6.1.4.1.25506.2.75.15.1.3.1

Each entry contains the enable status
of WIPS on one radio of a sensor.

Indexes

hh3cDot11WIPSApRadioApName hh3cDot11WIPSApRadioRadioID

Column	Syntax	OID
hh3cDot11WIPSApRadioApName Represents the sensor name.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.25506.2.75.15.1.3.1.1
hh3cDot11WIPSApRadioRadioID Represents a radio identifier.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.25506.2.75.15.1.3.1.2
hh3cDot11WIPSApRadioStatus The enable status of WIPS on the radio.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.3.1.3

The table defines signature rule or ap-class rule.

hh3cDot11WIPSRuleEntry row .1.3.6.1.4.1.25506.2.75.15.1.4.1

Each entry contains information about
signature rule or ap-class rule.

Indexes

hh3cDot11WIPSRuleType hh3cDot11WIPSRuleId

Column	Syntax	OID
hh3cDot11WIPSRuleType Represents the rule type.	Hh3cDot11WIPSRuleTypes Type Values: 4 signature 5 apclassfication	.1.3.6.1.4.1.25506.2.75.15.1.4.1.1
hh3cDot11WIPSRuleId Represents the rule id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.4.1.2
hh3cDot11WIPSRuleRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.4.1.3

The table provides information about applying signature rule.

hh3cDot11WIPSAlySigRuleEntry row .1.3.6.1.4.1.25506.2.75.15.1.5.1

Each entry contains information about applying signature rule.

Indexes

hh3cDot11WIPSAlySigPolicyName hh3cDot11WIPSAlySigRuleID

Column	Syntax	OID
hh3cDot11WIPSAlySigPolicyName Represents the name of signature policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.5.1.1
hh3cDot11WIPSAlySigRuleID Represents the rule id of signature.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.5.1.2
hh3cDot11WIPSAlySigRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.5.1.3

The table provides information about applying classification rule.

hh3cDot11WIPSAlyClaRuleEntry row .1.3.6.1.4.1.25506.2.75.15.1.6.1

Each entry contains information about applying classification rule.

Indexes

hh3cDot11WIPSAlyClaPolicyName hh3cDot11WIPSAlyClasRuleID

Column	Syntax	OID
hh3cDot11WIPSAlyClaPolicyName Represents the name of classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.6.1.1
hh3cDot11WIPSAlyClasRuleID Represents the rule id of classification.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.6.1.2
hh3cDot11WIPSAlyClaRuleType The type of applying classfication rule.	Hh3cDot11WIPSAlyAPClaRuleTyper/w Type Values: 1 rogue 2 external 3 misconfigured 4 authorized	.1.3.6.1.4.1.25506.2.75.15.1.6.1.3
hh3cDot11WIPSAlyClaRuleLevel The level of applying classfication rule.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.25506.2.75.15.1.6.1.4
hh3cDot11WIPSAlyClaRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.6.1.5

The table defines adding a MacAdress to the trust-device-list(TDL)

hh3cDot11WIPSTrustMacEntry row .1.3.6.1.4.1.25506.2.75.15.1.7.1

Each entry contains information about a Mac in a TDL.

Indexes

hh3cDot11WIPSTrustMacPolicyName hh3cDot11WIPSTrustMacAddress

Column	Syntax	OID
hh3cDot11WIPSTrustMacPolicyName Represents the classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.7.1.1
hh3cDot11WIPSTrustMacAddress Represents the MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.7.1.2
hh3cDot11WIPSTrustMacRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.7.1.3

The table defines add MacAdress to the static-forbidden-list(SFL)

hh3cDot11WIPSBlockMacEntry row .1.3.6.1.4.1.25506.2.75.15.1.8.1

Each entry contains information about a Mac in a SFL.

Indexes

hh3cDot11WIPSBlockMacPolicyName hh3cDot11WIPSBlockMacAddress

Column	Syntax	OID
hh3cDot11WIPSBlockMacPolicyName Represents the classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.8.1.1
hh3cDot11WIPSBlockMacAddress Represents the MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.8.1.2
hh3cDot11WIPSBlockMacRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.8.1.3

The table contains the manual classify information.

hh3cDot11WIPSManulClaEntry row .1.3.6.1.4.1.25506.2.75.15.1.9.1

Each entry contains the address specified manually in a policy.

Indexes

hh3cDot11WIPSManulClaPlyName hh3cDot11WIPSManulClaMac

Column	Syntax	OID
hh3cDot11WIPSManulClaPlyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.9.1.1
hh3cDot11WIPSManulClaMac Represents the MAC address of AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.9.1.2
hh3cDot11WIPSManulClassifyType The classification type of AP.	Hh3cDot11WIPSManualAPTyper/w Type Values: 1 authap 2 misconfiguredap 3 rogueap 4 externalap	.1.3.6.1.4.1.25506.2.75.15.1.9.1.3
hh3cDot11WIPSManuClaRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.9.1.4

The table provides information about trust oui.

hh3cDot11WIPSTrustOuiEntry row .1.3.6.1.4.1.25506.2.75.15.1.10.1

Each entry contains information about trust oui.

Indexes

hh3cDot11WIPSTrustOuiPolicyName hh3cDot11WIPSTrustOuiMac

Column	Syntax	OID
hh3cDot11WIPSTrustOuiPolicyName Represents the name of classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.10.1.1
hh3cDot11WIPSTrustOuiMac Represents the address of trust oui.	Hh3cDot11WIPSOuiAddress Type Constraints: range: 3	.1.3.6.1.4.1.25506.2.75.15.1.10.1.2
hh3cDot11WIPSTrustOuiRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.10.1.3

The table defines add one SSID to the trust-device-list(TDL)

hh3cDot11WIPSTrustSSidEntry row .1.3.6.1.4.1.25506.2.75.15.1.11.1

Each entry contains information about a SSID in a TDL.

Indexes

hh3cDot11WIPSTrustSSidPlyName hh3cDot11WIPSTrustSSidName

Column	Syntax	OID
hh3cDot11WIPSTrustSSidPlyName Represents the classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.11.1.1
hh3cDot11WIPSTrustSSidName Represents the SSID name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.75.15.1.11.1.2
hh3cDot11WIPSTrustSSidRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.11.1.3

The table contains the malformed packet detect information.

hh3cDot11WIPSMalfDtcEntry row .1.3.6.1.4.1.25506.2.75.15.1.12.1

Each entry contains the malformed type in a detect policy.

Indexes

hh3cDot11WIPSMalfDtcPolicyName hh3cDot11WIPSMalfDtcType

Column	Syntax	OID
hh3cDot11WIPSMalfDtcPolicyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.12.1.1
hh3cDot11WIPSMalfDtcType The malformed type of detect.	Hh3cDot11WIPSMalformedType Type Values: 1 duplicatedie 2 fatajack 3 illegalibssess 4 invalidaddresscombination 5 invalidassocreq 6 invalidauth 7 invaliddeauthcode 8 invaliddisassoccode 9 invalidhtie 10 invalidielength 11 invalidpktlength 13 nullproberesp 14 overfloweapolkey 15 overflowssid 16 redundantie	.1.3.6.1.4.1.25506.2.75.15.1.12.1.2
hh3cDot11WIPSMalfDtcQuietTime Represents the quiet time.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.12.1.3
hh3cDot11WIPSMalfDtciStatus The enable status of malformed detect.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.12.1.4

The table contains the infomation about
large duration malformed detect.

hh3cDot11WIPSLgeDutEntry row .1.3.6.1.4.1.25506.2.75.15.1.13.1

Each entry contains the infomation about
large duration malformed detect.

Indexes

hh3cDot11WIPSLgeDutPolicyName

Column	Syntax	OID
hh3cDot11WIPSLgeDutPolicyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.13.1.1
hh3cDot11WIPSLgeDutThreshold Represents large duration malformed detect threshold.	Integer32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.25506.2.75.15.1.13.1.2
hh3cDot11WIPSLgeDutQuietTime Represents large duration malformed detect quiet time .	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.13.1.3
hh3cDot11WIPSLgeDutStatus The enable status of large duration malformed detect.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.13.1.4

The table defines the control of AP learned the devices rate.

hh3cDot11WIPSRtLmtEntry row .1.3.6.1.4.1.25506.2.75.15.1.14.1

Each entry contains information about a control of AP learned rate .

Indexes

hh3cDot11WIPSRtLmtPolicyName hh3cDot11WIPSRtLmtRtLmtType

Column	Syntax	OID
hh3cDot11WIPSRtLmtPolicyName Represents the classification policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.14.1.1
hh3cDot11WIPSRtLmtRtLmtType Represents the device type.	Hh3cDot11WIPSRtLmtType Type Values: 1 ap 4 client	.1.3.6.1.4.1.25506.2.75.15.1.14.1.2
hh3cDot11WIPSRtLmtInterval The statistics cycle of AP learned device.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.25506.2.75.15.1.14.1.3
hh3cDot11WIPSRtLmtThreshold The maximum devices number of AP learned.	Integer32r/w Constraints: range: 1-4096	.1.3.6.1.4.1.25506.2.75.15.1.14.1.4
hh3cDot11WIPSRtLmtQuiet Represents a quiet time after the warning log had been sent.	Integer32r/w Constraints: range: 1200-3600	.1.3.6.1.4.1.25506.2.75.15.1.14.1.5
hh3cDot11WIPSRtLmtStatus The enable status of the control of AP learned the devices rate.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.14.1.6

The table contains the infomation about detect attack.

hh3cDot11WIPSDtcAckEntry row .1.3.6.1.4.1.25506.2.75.15.1.15.1

Each entry contains the infomation about detect attack.

Indexes

hh3cDot11WIPSDtcAckPolicyName hh3cDot11WIPSDtcAckType

Column	Syntax	OID
hh3cDot11WIPSDtcAckPolicyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.15.1.1
hh3cDot11WIPSDtcAckType Represents the detect attack type.	Hh3cDot11WIPSDtcAckTypes Type Values: 1 apspoof 4 clientspoof 6 weakiv 7 windowsbridge 8 fortymhz 11 omerta 12 disassoc 13 deauth 14 prohibitedchannel 16 authunencryptedap 17 authunencryptedclient 18 hotspot 19 greenmode 20 tableoverflow 22 mitm 23 wirelessbridge 25 apchannelchange	.1.3.6.1.4.1.25506.2.75.15.1.15.1.2
hh3cDot11WIPSDtcAckQuietTime Represents detect attack quiet time .	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.15.1.3
hh3cDot11WIPSDtcAckInterval Represents detect attack interval.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.25506.2.75.15.1.15.1.4
hh3cDot11WIPSDtcAckThreshold Represents detect attack threshold.	Integer32r/w Constraints: range: 1-100000	.1.3.6.1.4.1.25506.2.75.15.1.15.1.5
hh3cDot11WIPSDtcAckStatus The enable status of detect attack.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.15.1.6

The table contains the infomation about detect device time.

hh3cDot11WIPSDtcDevTimeEntry row .1.3.6.1.4.1.25506.2.75.15.1.16.1

Each entry contains the infomation about detect device time.

Indexes

hh3cDot11WIPSDtcDevTimePlyName hh3cDot11WIPSDtcDevTimeType

Column	Syntax	OID
hh3cDot11WIPSDtcDevTimePlyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.16.1.1
hh3cDot11WIPSDtcDevTimeType Represents the detect device time type.	Hh3cDot11WIPSDtcDevTimeTypes Type Values: 1 deviceap 2 deviceclient	.1.3.6.1.4.1.25506.2.75.15.1.16.1.2
hh3cDot11WIPSDtcDevTimeInactive Represents detect device time inactive time.	Integer32r/w Constraints: range: 60-1200	.1.3.6.1.4.1.25506.2.75.15.1.16.1.3
hh3cDot11WIPSDtcDevTimeAging Represents detect device time aging time.	Integer32r/w Constraints: range: 120-86400	.1.3.6.1.4.1.25506.2.75.15.1.16.1.4
hh3cDot11WIPSDtcDevTimeStatus The enable status of detect device time.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.16.1.5

The table provides information about AP impersonation.

hh3cDot11WIPSApimperEntry row .1.3.6.1.4.1.25506.2.75.15.1.17.1

Each entry contains information about one AP impersonation.

Indexes

hh3cDot11WIPSApimperPolicyName

Column	Syntax	OID
hh3cDot11WIPSApimperPolicyName Represents the name of policy.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.17.1.1
hh3cDot11WIPSApimperQuiet The quiet of this table entry.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.17.1.2
hh3cDot11WIPSApimperStatus The status of this table entry.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.17.1.3

The table contains the enable status of detect of soft AP.

hh3cDot11WIPSDctSoftApEntry row .1.3.6.1.4.1.25506.2.75.15.1.18.1

Each entry contains the enable status of detect a soft AP.

Indexes

hh3cDot11WIPSDctSoftApPlyName

Column	Syntax	OID
hh3cDot11WIPSDctSoftApPlyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.18.1.1
hh3cDot11WIPSDctSoftApThold Represents a convert time.	Integer32r/w Constraints: range: 5-600	.1.3.6.1.4.1.25506.2.75.15.1.18.1.2
hh3cDot11WIPSDctSoftApStatus The enable status of detect a soft AP.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.18.1.3

This table contains the power-save detect information.

hh3cDot11WIPSPowerSaveEntry row .1.3.6.1.4.1.25506.2.75.15.1.19.1

Each entry contains information about power-save detect.

Indexes

hh3cDot11WIPSPowerSavePlyName

Column	Syntax	OID
hh3cDot11WIPSPowerSavePlyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.19.1.1
hh3cDot11WIPSPowerSaveInterval Represents the interval of power-save detect.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.25506.2.75.15.1.19.1.2
hh3cDot11WIPSPowerSaveMinOffPkt Represents the minoffpacket of power-save detect.	Integer32r/w Constraints: range: 10-150	.1.3.6.1.4.1.25506.2.75.15.1.19.1.3
hh3cDot11WIPSPowerSaveOnOffPct Represents the onoffpercent of power-save detect.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.15.1.19.1.4
hh3cDot11WIPSPowerSaveQuiet Represents the quiettime of power-save detect.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.19.1.5
hh3cDot11WIPSPowerSaveStatus Represents the enabled status of power-save detect.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.19.1.6

The table defines ignore list MAC.

hh3cDot11WIPSIgnListMacEntry row .1.3.6.1.4.1.25506.2.75.15.1.20.1

Each entry contains information about ignore list MAC.

Indexes

hh3cDot11WIPSIgnListMacMacAddr

Column	Syntax	OID
hh3cDot11WIPSIgnListMacMacAddr Represents the MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.20.1.1
hh3cDot11WIPSIgnListMacRowStus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.20.1.2

The table defines the detect of honey-pot.

hh3cDot11WIPSHoneyPotEntry row .1.3.6.1.4.1.25506.2.75.15.1.21.1

Each entry contains the enable status of detect honey-pot.

Indexes

hh3cDot11WIPSHoneyPotPlyName

Column	Syntax	OID
hh3cDot11WIPSHoneyPotPlyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.21.1.1
hh3cDot11WIPSHoneyPotSim Represents the similarity-value of matching SSID.	Integer32r/w Constraints: range: 70-100	.1.3.6.1.4.1.25506.2.75.15.1.21.1.2
hh3cDot11WIPSHoneyPotQuiet Represents a quiet time after the warning log had been sent.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.21.1.3
hh3cDot11WIPSHoneyPotStatus The enable status of detect honey-pot.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.21.1.4

The table defines the detect of AP-flood.

hh3cDot11WIPSAPFldEntry row .1.3.6.1.4.1.25506.2.75.15.1.22.1

Each entry contains the enable status of detect AP-flood.

Indexes

hh3cDot11WIPSAPFldPolicyName

Column	Syntax	OID
hh3cDot11WIPSAPFldPolicyName Represents the detect policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.22.1.1
hh3cDot11WIPSAPFldApnum Represents allowable AP devices number in a wireless network.	Integer32r/w Constraints: range: 10-200	.1.3.6.1.4.1.25506.2.75.15.1.22.1.2
hh3cDot11WIPSAPFldExceed Represents the allowable maximum AP devices number had exceed.	Integer32r/w Constraints: range: 10-200	.1.3.6.1.4.1.25506.2.75.15.1.22.1.3
hh3cDot11WIPSAPFldQuiet Represents a quiet time after the warning log had been sent.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.22.1.4
hh3cDot11WIPSAPFldStatus The enable status of detect AP-flood.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.22.1.5

This table contains the manual countermeasure information.

hh3cDot11WIPSCtmManualsEntry row .1.3.6.1.4.1.25506.2.75.15.1.23.1

Each entry contains information about manual countermeasure.

Indexes

hh3cDot11WIPSCtmManualsPlyName hh3cDot11WIPSCtmManualsMacAddr

Column	Syntax	OID
hh3cDot11WIPSCtmManualsPlyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.23.1.1
hh3cDot11WIPSCtmManualsMacAddr Represents the MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.23.1.2
hh3cDot11WIPSCtmManualsRowStus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.23.1.3

The table contains the countermeasure all sensor information.

hh3cDot11WIPSCtmSensorEntry row .1.3.6.1.4.1.25506.2.75.15.1.24.1

Each entry contains information about countermeasure all sensor.

Indexes

hh3cDot11WIPSCtmSensorPolicyName

Column	Syntax	OID
hh3cDot11WIPSCtmSensorPolicyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.24.1.1
hh3cDot11WIPSCtmSensoriStatus The status of this table entry.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.24.1.2

The table contains the invalid OUI classification information.

hh3cDot11WIPSInvOuiStateEntry row .1.3.6.1.4.1.25506.2.75.15.1.25.1

Each entry contains about status of invalid OUI classification.

Indexes

hh3cDot11WIPSInvOuiStaPlyName

Column	Syntax	OID
hh3cDot11WIPSInvOuiStaPlyName Represents the policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.25.1.1
hh3cDot11WIPSInvOuiStaiStatus The enable status of invalid OUI classification.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.25.1.2

The table contains the enable status of
WIPS AP classification authentication.

hh3cDot11WIPSAPClaAuthEntry row .1.3.6.1.4.1.25506.2.75.15.1.26.1

Each entry contains the enable status of
WIPS AP classification authentication.

Indexes

hh3cDot11WIPSAPClaAuthRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaAuthRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.26.1.1
hh3cDot11WIPSAPClaAuthMethod Represents the AP classification authentication method.	Hh3cDot11WIPSAPClaAuthMethodsr/w Type Values: 1 none 2 dot1x 3 psk 5 other	.1.3.6.1.4.1.25506.2.75.15.1.26.1.2
hh3cDot11WIPSAPClaAuthType Represents the AP classification authentication compare type.	Hh3cDot11WIPSAPClassifyCmpTyper/w Type Values: 1 equal 3 include	.1.3.6.1.4.1.25506.2.75.15.1.26.1.3
hh3cDot11WIPSAPClaAuthStatus The enable status of AP classification authentication.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.26.1.4

The table contains the enable status of
AP classification clinet online.

hh3cDot11WIPSAPClaCltOnlEntry row .1.3.6.1.4.1.25506.2.75.15.1.27.1

Each entry contains the enable status of
AP classification clinet online.

Indexes

hh3cDot11WIPSAPClaCltOnlRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaCltOnlRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.27.1.1
hh3cDot11WIPSAPClaCltOnlV1 Represents the AP classification clinet online value1.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.25506.2.75.15.1.27.1.2
hh3cDot11WIPSAPClaCltOnlV2 Represents the AP classification clinet online value2.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.25506.2.75.15.1.27.1.3
hh3cDot11WIPSAPClaCltOnlSts The enable status of WIPS AP classification clinet online.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.27.1.4

The table contains the enable status of AP classification discover.

hh3cDot11WIPSAPClaDiscrEntry row .1.3.6.1.4.1.25506.2.75.15.1.28.1

Each entry contains the enable status of AP classification discover.

Indexes

hh3cDot11WIPSAPClaDiscrRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaDiscrRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.28.1.1
hh3cDot11WIPSAPClaDiscrV1 Represents the AP classification discover value1.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.25506.2.75.15.1.28.1.2
hh3cDot11WIPSAPClaDiscrV2 Represents the AP classification discover value2.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.25506.2.75.15.1.28.1.3
hh3cDot11WIPSAPClaDiscrSta The enable status of AP classification discover.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.28.1.4

The table contains the enable status of AP classification rssi.

hh3cDot11WIPSAPClaRssiEntry row .1.3.6.1.4.1.25506.2.75.15.1.29.1

Each entry contains the enable status of AP classification rssi.

Indexes

hh3cDot11WIPSAPClaRssiRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaRssiRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.29.1.1
hh3cDot11WIPSAPClaRssiV1 Represents the AP classification rssi value1.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.15.1.29.1.2
hh3cDot11WIPSAPClaRssiV2 Represents the AP classification rssi value2.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.15.1.29.1.3
hh3cDot11WIPSAPClaRssiSta The enable status of AP classification rssi.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.29.1.4

The table contains the enable status of AP classification upduration.

hh3cDot11WIPSAPClaUpdurEntry row .1.3.6.1.4.1.25506.2.75.15.1.30.1

Each entry contains the enable status of AP classification upduration.

Indexes

hh3cDot11WIPSAPClaUpdurRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaUpdurRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.30.1.1
hh3cDot11WIPSAPClaUpdurV1 Represents the AP classification upduration value1.	Integer32r/w Constraints: range: 0-2592000	.1.3.6.1.4.1.25506.2.75.15.1.30.1.2
hh3cDot11WIPSAPClaUpdurV2 Represents the AP classification upduration value2.	Integer32r/w Constraints: range: 0-2592000	.1.3.6.1.4.1.25506.2.75.15.1.30.1.3
hh3cDot11WIPSAPClaUpdurSta The enable status of AP classification upduration.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.30.1.4

The table contains the enable status of AP classification oui.

hh3cDot11WIPSAPClaOuiEntry row .1.3.6.1.4.1.25506.2.75.15.1.31.1

Each entry contains the enable status of AP classification oui.

Indexes

hh3cDot11WIPSAPClaOuiRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaOuiRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.31.1.1
hh3cDot11WIPSAPClaOuiMac Represents the AP classification oui.	Hh3cDot11WIPSOuiAddressr/w Type Constraints: range: 3	.1.3.6.1.4.1.25506.2.75.15.1.31.1.2
hh3cDot11WIPSAPClaOuiStatus The enable status of AP classification oui.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.31.1.3

The table contains the enable status of AP classification security.

hh3cDot11WIPSAPClaSryEntry row .1.3.6.1.4.1.25506.2.75.15.1.32.1

Each entry contains the enable status of AP classification security.

Indexes

hh3cDot11WIPSAPClaSryRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaSryRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.32.1.1
hh3cDot11WIPSAPClaSryType Represents the AP classification security.	Hh3cDot11WIPSAPClaSecurityTyper/w Type Values: 1 clear 2 wpa2 3 wpa 9 wep	.1.3.6.1.4.1.25506.2.75.15.1.32.1.2
hh3cDot11WIPSAPClaSryCmpType Represents the AP classification security.	Hh3cDot11WIPSAPClassifyCmpTyper/w Type Values: 1 equal 3 include	.1.3.6.1.4.1.25506.2.75.15.1.32.1.3
hh3cDot11WIPSAPClaSrySta The enable status of AP classification security.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.32.1.4

The table contains the enable status of AP classification ssid.

hh3cDot11WIPSAPClaSsidEntry row .1.3.6.1.4.1.25506.2.75.15.1.33.1

Each entry contains the enable status of AP classification ssid.

Indexes

hh3cDot11WIPSAPClaSsidRuleID

Column	Syntax	OID
hh3cDot11WIPSAPClaSsidRuleID Represents the rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.33.1.1
hh3cDot11WIPSAPClaSsidName Represents the AP classification ssid name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.75.15.1.33.1.2
hh3cDot11WIPSAPClaSsidcase Represents the AP classification case-sensitive.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.1.33.1.3
hh3cDot11WIPSAPClaSsidCmpType Represents the AP classification ssid compare type.	Hh3cDot11WIPSAPClasSsidCmpTyper/w Type Values: 1 equal 2 notequal 3 include 4 notinclude	.1.3.6.1.4.1.25506.2.75.15.1.33.1.4
hh3cDot11WIPSAPClaSsidStatus The enable status of AP classification ssid.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.33.1.5

The table provides information about detect signature.

hh3cDot11WIPSDtcSigEntry row .1.3.6.1.4.1.25506.2.75.15.1.34.1

Each entry contains information about signature detect.

Indexes

hh3cDot11WIPSDtcSigPolicyName

Column	Syntax	OID
hh3cDot11WIPSDtcSigPolicyName Represents the name of the policy.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.34.1.1
hh3cDot11WIPSDtcSigInterval Represents the interval of signature detect.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.25506.2.75.15.1.34.1.2
hh3cDot11WIPSDtcSigQuiet Represents the quiet of signature detect.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.34.1.3
hh3cDot11WIPSDtcSigThreshold Represents the threshold of signature detect.	Integer32r/w Constraints: range: 1-100000	.1.3.6.1.4.1.25506.2.75.15.1.34.1.4
hh3cDot11WIPSDtcSigStatus The status of this table entry.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.34.1.5

The table provides information about policy.

hh3cDot11WIPSPolicyEntry row .1.3.6.1.4.1.25506.2.75.15.1.35.1

Each entry contains the enable status of policy configuration.

Indexes

hh3cDot11WIPSPolicyType hh3cDot11WIPSPolicyName

Column	Syntax	OID
hh3cDot11WIPSPolicyType Represents the type of policy.	Hh3cDot11WIPSPolicyTypeValue Type Values: 1 classification 2 countermeasure 3 detect 4 signature	.1.3.6.1.4.1.25506.2.75.15.1.35.1.1
hh3cDot11WIPSPolicyName Represents the name of the policy.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.35.1.2
hh3cDot11WIPSPolicyRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.35.1.3

The table contains the enable status of signature frame type.

hh3cDot11WIPSSigFrameTypeEntry row .1.3.6.1.4.1.25506.2.75.15.1.36.1

Each entry contains the status of signature frame type.

Indexes

hh3cDot11WIPSSigFrameTypeRuleId

Column	Syntax	OID
hh3cDot11WIPSSigFrameTypeRuleId Represents the signature rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.36.1.1
hh3cDot11WIPSSigFrameType Represents the signature frame type.	Hh3cDot11WIPSSigFrameTypesr/w Type Values: 1 management 2 control 3 data	.1.3.6.1.4.1.25506.2.75.15.1.36.1.2
hh3cDot11WIPSSigFrameSubType Represents the signature frame subtype.	Hh3cDot11WIPSSigFrameSubTypesr/w Type Values: 1 assocerq 2 assocresp 3 probereq 4 beacon 5 disasso 6 auth 7 deauth	.1.3.6.1.4.1.25506.2.75.15.1.36.1.3
hh3cDot11WIPSSigFrameTypeStatus The enable status of signature frame type.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.36.1.4

The table contains the countermeasure commands.

hh3cDot11WIPSCtmEntry row .1.3.6.1.4.1.25506.2.75.15.1.37.1

Each entry contains the enable command of countermeasure.

Indexes

hh3cDot11WIPSCtmPolicyName hh3cDot11WIPSCtmClassifyType

Column	Syntax	OID
hh3cDot11WIPSCtmPolicyName Represents the countermeasure policy name.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.37.1.1
hh3cDot11WIPSCtmClassifyType Represents a countermeasure command identifier.	Hh3cDot11WIPSCtmType Type Values: 1 externalAp 2 misassociationClient 3 misconfiguredAp 4 potentialAuthorizedAp 5 potentialExternalAp 6 potentialRogueAp 7 rogueAp 8 unauthorizedClient 9 uncategorizedAp 10 uncategorizedClient 11 attack 12 adhoc	.1.3.6.1.4.1.25506.2.75.15.1.37.1.2
hh3cDot11WIPSCtmStatus The enable status of one countermeasure command.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.37.1.3

The table defines signature pattern.

hh3cDot11WIPSSigPatternEntry row .1.3.6.1.4.1.25506.2.75.15.1.38.1

Each entry contains information about signature pattern.

Indexes

hh3cDot11WIPSSigPatternRuleId hh3cDot11WIPSSigPatternNum

Column	Syntax	OID
hh3cDot11WIPSSigPatternRuleId Represents the signature pattern rule id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.38.1.1
hh3cDot11WIPSSigPatternNum Represents the signature pattern pattern number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.15.1.38.1.2
hh3cDot11WIPSSigPatternOffset Represents the signature pattern offset.	Integer32r/w Constraints: range: 0-2346	.1.3.6.1.4.1.25506.2.75.15.1.38.1.3
hh3cDot11WIPSSigPatternMask Represents the signature pattern mask.	OctetStringr/w Constraints: range: 1-4	.1.3.6.1.4.1.25506.2.75.15.1.38.1.4
hh3cDot11WIPSSigPatternValue1 Represents the signature pattern value1.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.15.1.38.1.5
hh3cDot11WIPSSigPatternValue2 Represents the signature pattern value2.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.25506.2.75.15.1.38.1.6
hh3cDot11WIPSSigPatternFromPld Represents the signature pattern frome payload.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.1.38.1.7
hh3cDot11WIPSSigPatternRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.75.15.1.38.1.8

The table contains the infomation about signature sequence number.

hh3cDot11WIPSSigSeqNumEntry row .1.3.6.1.4.1.25506.2.75.15.1.39.1

Each entry contains the infomation about signature sequence number.

Indexes

hh3cDot11WIPSSigSeqNumRuleId

Column	Syntax	OID
hh3cDot11WIPSSigSeqNumRuleId Represents the signature rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.39.1.1
hh3cDot11WIPSSigSeqNumValue1 Represents sequence number value1.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.25506.2.75.15.1.39.1.2
hh3cDot11WIPSSigSeqNumValue2 Represents sequence number value2 .	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.25506.2.75.15.1.39.1.3
hh3cDot11WIPSSigSeqNumStatus The enable status of signature sequence number.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.39.1.4

The table contains the infomation about signature SSID.

hh3cDot11WIPSSigSsidEntry row .1.3.6.1.4.1.25506.2.75.15.1.40.1

Each entry contains the infomation about signature SSID.

Indexes

hh3cDot11WIPSSigSsidRuleId

Column	Syntax	OID
hh3cDot11WIPSSigSsidRuleId Represents the signature rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.40.1.1
hh3cDot11WIPSSigSsidSsid Represents the name of signature SSID.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.75.15.1.40.1.2
hh3cDot11WIPSSigSsidCase Represents the case sensitive of signature SSID.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.1.40.1.3
hh3cDot11WIPSSigSsidMatchType Represents the match type of signature SSID.	Hh3cDot11WIPSSigSsidMatchTypesr/w Type Values: 1 equal 2 notequal 3 include 4 notinclude	.1.3.6.1.4.1.25506.2.75.15.1.40.1.4
hh3cDot11WIPSSigSsidStatus The enable status of signature SSID.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.40.1.5

The table contains the infomation about signature SSID length.

hh3cDot11WIPSSigSsidLengthEntry row .1.3.6.1.4.1.25506.2.75.15.1.41.1

Each entry contains the infomation about signature SSID length.

Indexes

hh3cDot11WIPSSigSsidLengthRuleId

Column	Syntax	OID
hh3cDot11WIPSSigSsidLengthRuleId Represents the signature rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.41.1.1
hh3cDot11WIPSSigSsidLengthValue1 Represents signature SSID length value1.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.75.15.1.41.1.2
hh3cDot11WIPSSigSsidLengthValue2 Represents signature SSID length value2 .	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.25506.2.75.15.1.41.1.3
hh3cDot11WIPSSigSsidLengthStatus The enable status of signature SSID length.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.41.1.4

This table contains the flood detect information.

hh3cDot11WIPSFldDetectEntry row .1.3.6.1.4.1.25506.2.75.15.1.42.1

Each entry contains information about one type of flood detect.

Indexes

hh3cDot11WIPSFldDetectPlyName hh3cDot11WIPSFldDetectType

Column	Syntax	OID
hh3cDot11WIPSFldDetectPlyName Represents the policy name of detect.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.1.42.1.1
hh3cDot11WIPSFldDetectType Represents the type of flood detect.	Hh3cDot11WIPSFldDctType Type Values: 1 associationrequest 2 authentication 3 beacon 4 blockack 5 cts 6 deauthentication 7 disassociation 8 eapolstart 9 nulldata 10 proberequest 11 reassociationrequest 12 rts 13 eapollogoff 14 eapfailure 15 eapsuccess	.1.3.6.1.4.1.25506.2.75.15.1.42.1.2
hh3cDot11WIPSFldDetectInter Represents the interval of flood detect.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.25506.2.75.15.1.42.1.3
hh3cDot11WIPSFldDetectThresh Represents the threshold of flood detect.	Integer32r/w Constraints: range: 1-100000	.1.3.6.1.4.1.25506.2.75.15.1.42.1.4
hh3cDot11WIPSFldDetectQuiet Represents the quiet time of flood detect.	Integer32r/w Constraints: range: 5-604800	.1.3.6.1.4.1.25506.2.75.15.1.42.1.5
hh3cDot11WIPSFldDetectStatus The enable status of flood detect.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.42.1.6

The table contains the infomation about signature MAC address.

hh3cDot11WIPSSignatureMacEntry row .1.3.6.1.4.1.25506.2.75.15.1.43.1

Each entry contains the infomation about signature MAC address.

Indexes

hh3cDot11WIPSSignatureMacRuleId

Column	Syntax	OID
hh3cDot11WIPSSignatureMacRuleId Represents the signature rule ID.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.25506.2.75.15.1.43.1.1
hh3cDot11WIPSSignatureMacMacTyp Represents the type of signature MAC address.	Hh3cDot11WIPSSigMacMacTyper/w Type Values: 1 source 2 destination 3 bssid	.1.3.6.1.4.1.25506.2.75.15.1.43.1.2
hh3cDot11WIPSSignatureMacMacAdd Represents the MAC address of signature MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.1.43.1.3
hh3cDot11WIPSSignatureMacStatus The enable status of signature MAC address.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.43.1.4

The table contains the enable status of WIPS NAT detect.

hh3cDot11WIPSNatDetectEntry row .1.3.6.1.4.1.25506.2.75.15.1.45.1

Each entry contains the enable status of NAT detect.

Indexes

hh3cDot11WIPSNatDetectApName

Column	Syntax	OID
hh3cDot11WIPSNatDetectApName Represents the name of AP.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.25506.2.75.15.1.45.1.1
hh3cDot11WIPSNatDetectStatus The enable status of NAT detect on AP.	Hh3cDot11WIPSEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.25506.2.75.15.1.45.1.2

The table contains BSS information for APs
detected by WIPS.

hh3cDot11WIPSDctAPEntry row .1.3.6.1.4.1.25506.2.75.15.2.1.1

Each entry contains BSS information for one AP.

Indexes

hh3cDot11WIPSDctAPVSD hh3cDot11WIPSDctAPMac

Column	Syntax	OID
hh3cDot11WIPSDctAPVSD Represents the virtual security domain in which the BSS was detected.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.2.1.1.1
hh3cDot11WIPSDctAPMac Represents the Basic Service Set.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.1.1.2
hh3cDot11WIPSDctAPClassifyWay Represents by which way the AP is categorized.	Hh3cDot11WIPSDevClassifyWay Type Values: 1 manual 2 invalidOUI 3 trustlist 4 blocklist 5 associated 6 userdefined 7 auto	.1.3.6.1.4.1.25506.2.75.15.2.1.1.3
hh3cDot11WIPSDctAPClassifyType Represents the category of the AP.	Hh3cDot11WIPSAPClassifyType Type Values: 1 authorized 2 misconfigured 3 rogue 4 external 5 adhoc 6 mesh 7 potentialAuthorized 8 potentialRogue 9 potentialExternal 10 uncategorized	.1.3.6.1.4.1.25506.2.75.15.2.1.1.4
hh3cDot11WIPSDctAPSeverityLevel Represents the security level of the detected AP.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.15.2.1.1.5
hh3cDot11WIPSDctAPStatus Represents the status of the AP detected by WIPS.	Hh3cDot11WIPSDevStatus Type Values: 1 active 2 inactive	.1.3.6.1.4.1.25506.2.75.15.2.1.1.6
hh3cDot11WIPSDctAPStatusDut Represents the duration of the AP status.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.15.2.1.1.7
hh3cDot11WIPSDctAPVendor Represents the vendor of the AP detected by WIPS.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.15.2.1.1.8
hh3cDot11WIPSDctAPSSID Represents the SSID that is broadcast by the AP.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.25506.2.75.15.2.1.1.9
hh3cDot11WIPSDctAPSecurity Represents the security suites of the detected AP.	Hh3cDot11WIPSAPSecurityType Type Constraints: range: 1..255	.1.3.6.1.4.1.25506.2.75.15.2.1.1.10
hh3cDot11WIPSDctAPEncryptMethod Represents the encryption method used by the detected AP.	Hh3cDot11WIPSEncryptMethod Type Constraints: range: 1..65535	.1.3.6.1.4.1.25506.2.75.15.2.1.1.11
hh3cDot11WIPSDctAPAuthMethod Represents the authentication method used by the detected AP.	Hh3cDot11WIPSAuthMethod Type Constraints: range: 1..65535	.1.3.6.1.4.1.25506.2.75.15.2.1.1.12
hh3cDot11WIPSDctAPRadioType Represents the radio type used by the detected AP.	Hh3cDot11WIPSRadioType Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac	.1.3.6.1.4.1.25506.2.75.15.2.1.1.13
hh3cDot11WIPSDctAPWorkChannel Represents the radio channel on which the detected AP operates.	Hh3cDot11WIPSChannel Type Constraints: range: 1..224	.1.3.6.1.4.1.25506.2.75.15.2.1.1.14
hh3cDot11WIPSDctAPIsCountered Represents whether WIPS has taken countermeasures on the detected AP.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.1.1.15
hh3cDot11WIPSDctAPAttachStaNum Represents the number of clients associated with the detected AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.1.1.16
hh3cDot11WIPSDctAPRptSensorNum Represents the number of sensors that have detected the AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.1.1.17
hh3cDot11WIPSDctAPIsBdcastSSID Represents whether the detected AP is broadcasting the SSID.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.1.1.18
hh3cDot11WIPSDctAPType Represents the type of the detected AP.	Hh3cDot11WIPSAPType Type Values: 1 normal 2 adhoc 3 mesh	.1.3.6.1.4.1.25506.2.75.15.2.1.1.19
hh3cDot11WIPSDctAPIsQosSported Represents the support of the detected AP for QoS.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.1.1.20
hh3cDot11WIPSDctAPBeaconItv Represents the beacon interval of the detected AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.1.1.21
hh3cDot11WIPSDctAPUpDuration Represents the amount of time that has elapsed since AP started to work, which is calculated by using beacon/probe response frame.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.15.2.1.1.22

The table contains information about stations detected by WIPS.

hh3cDot11WIPSDctStaEntry row .1.3.6.1.4.1.25506.2.75.15.2.2.1

Each entry contains information about a station
detected by WIPS.

Indexes

hh3cDot11WIPSDctStaVSD hh3cDot11WIPSDctStaMac

Column	Syntax	OID
hh3cDot11WIPSDctStaVSD Represents the virtual security domain in which the station was detected.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.2.2.1.1
hh3cDot11WIPSDctStaMac Represents the MAC address of the station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.2.1.2
hh3cDot11WIPSDctStaAssocBSSID Represents the BSSID with which the station is associated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.2.1.3
hh3cDot11WIPSDctStaClassifyWay Represents the method that the client is categorized.	Hh3cDot11WIPSDevClassifyWay Type Values: 1 manual 2 invalidOUI 3 trustlist 4 blocklist 5 associated 6 userdefined 7 auto	.1.3.6.1.4.1.25506.2.75.15.2.2.1.4
hh3cDot11WIPSDctStaClassifyType Represents the category of the client.	Hh3cDot11WIPSStaClassifyType Type Values: 1 authorized 2 unauthorized 3 misassociated 4 uncategorized	.1.3.6.1.4.1.25506.2.75.15.2.2.1.5
hh3cDot11WIPSDctStaSeverityLevel Represents the security level of the detected client.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.25506.2.75.15.2.2.1.6
hh3cDot11WIPSDctStaIsDissociate Represents whether the detected client is dissociated.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.2.1.7
hh3cDot11WIPSDctStaStatus Represents the status of the station detected by WIPS.	Hh3cDot11WIPSDevStatus Type Values: 1 active 2 inactive	.1.3.6.1.4.1.25506.2.75.15.2.2.1.8
hh3cDot11WIPSDctStaStatusDurat Represents the duration of the client status.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.75.15.2.2.1.9
hh3cDot11WIPSDctStaVendor Represents the vendor of the station detected by WIPS.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.25506.2.75.15.2.2.1.10
hh3cDot11WIPSDctStaRadioType Represents the radio type used by the detected station.	Hh3cDot11WIPSRadioType Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an 64 dot11ac 128 dot11gac	.1.3.6.1.4.1.25506.2.75.15.2.2.1.11
hh3cDot11WIPSDctStaRptSensorNum Represents the number of sensors that have detected the station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.2.1.12
hh3cDot11WIPSDctStaWorkChannel Represents on which radio channel that the WIPS sensor detected the station.	Hh3cDot11WIPSChannel Type Constraints: range: 1..224	.1.3.6.1.4.1.25506.2.75.15.2.2.1.13
hh3cDot11WIPSDctStaIsCountered Represents whether WIPS has taken countermeasures on the detected client.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.2.1.14

The table contains information about associated client by WIPS.

hh3cDot11WIPSApAssoCltEntry row .1.3.6.1.4.1.25506.2.75.15.2.3.1

Each entry contains information about a associated client by WIPS.

Indexes

hh3cDot11WIPSApAssoCltVSDName hh3cDot11WIPSApAssoCltApMacAddr hh3cDot11WIPSApAssoCltClMacAddr

Column	Syntax	OID
hh3cDot11WIPSApAssoCltVSDName Represents the virtual security domain in which the client had Associated.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.2.3.1.1
hh3cDot11WIPSApAssoCltApMacAddr Represents the MAC address of the AP.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.3.1.2
hh3cDot11WIPSApAssoCltClMacAddr Represents the MAC address of the Client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.3.1.3
hh3cDot11WIPSApAssoCltIsAsso Represents whether WIPS had taken associated on the detected client.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.75.15.2.3.1.4

This table contains information about AP report sensors.

hh3cDot11WIPSApRpSenEntry row .1.3.6.1.4.1.25506.2.75.15.2.4.1

Each entry contains information about one device in a VSD.

Indexes

hh3cDot11WIPSApRpSenVsdName hh3cDot11WIPSApRpSenMacAddr hh3cDot11WIPSApRpSenName

Column	Syntax	OID
hh3cDot11WIPSApRpSenVsdName Represents the name of the VSD.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.25506.2.75.15.2.4.1.1
hh3cDot11WIPSApRpSenMacAddr Represents the MAC address of the sensor.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.25506.2.75.15.2.4.1.2
hh3cDot11WIPSApRpSenName Represents the name of the sensor.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.25506.2.75.15.2.4.1.3
hh3cDot11WIPSApRpSenRadioID Represents the radio ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.4.1.4
hh3cDot11WIPSApRpSenRssi Represents the rssi of AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.4.1.5
hh3cDot11WIPSApRpSenChannel Represents the channel of AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.75.15.2.4.1.6
hh3cDot11WIPSApRpSenFirstRpTime Represents the first report time of AP.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.25506.2.75.15.2.4.1.7
hh3cDot11WIPSApRpSenLastRpTime Represents the last report time of AP.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.25506.2.75.15.2.4.1.8