HH3C-DOT11-ACMT-MIB

        This MIB defines information as per wireless AC and tunnel between
AP and AC.
If NMS intends to get more detailed information for the AP and AC,
it could refer entPhysicalIndex in the Entity MIB to get entity
information.
        
GLOSSARY
        
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
        
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
        
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
        
Radio
The chip set to receive and send wireless signal.
        
Fat AP
Applied in the home, SOHO and so on, and it could
independently work without help from AC.
        
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
        
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
        
Basic Service Set
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP. It will
be identified by BSSID.
    

Source file

HH3C-DOT11-ACMT-MIB

Last revised

6 Jan 2023, 11:00 UTC

Identity

hh3cDot11ACMT

Base OID

1.3.6.1.4.1.25506.2.75.1