HH3C-DHCPSNOOP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
8

hh3cDhcpSnoopTable

table
.1.3.6.1.4.1.25506.2.36.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDhcpSnoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPSNOOP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPSNOOP-MIB::hh3cDhcpSnoopTable' 
The table containing information of DHCP clients listened by
DHCP snooping and it's enabled or disabled by setting
hh3cDhcpSnoopEnable node.
hh3cDhcpSnoopEntry row .1.3.6.1.4.1.25506.2.36.1.2.1
An entry containing information of DHCP clients.
Indexes
Column Syntax OID
hh3cDhcpSnoopClientIpAddressType
DHCP clients' IP addresses type (IPv4 or IPv6).
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.36.1.2.1.1
hh3cDhcpSnoopClientIpAddress
DHCP clients' IP addresses collected by DHCP snooping.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.2.36.1.2.1.2
hh3cDhcpSnoopClientMacAddress
DHCP clients' MAC addresses collected by DHCP snooping.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.36.1.2.1.3
hh3cDhcpSnoopClientProperty
Method of getting IP addresses collected by DHCP snooping.
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.25506.2.36.1.2.1.4
hh3cDhcpSnoopClientUnitNum
IRF (Intelligent Resilient Fabric) unit number via whom the clients
get their IP addresses. The value 0 means this device does not support IRF.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.36.1.2.1.5

hh3cDhcpSnoopTrustTable

table
.1.3.6.1.4.1.25506.2.36.1.3 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDhcpSnoopTrustTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPSNOOP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPSNOOP-MIB::hh3cDhcpSnoopTrustTable' 
A table is used to configure and monitor port trusted status.
hh3cDhcpSnoopTrustEntry row .1.3.6.1.4.1.25506.2.36.1.3.1
An entry containing information about trusted status of ports.
Indexes
Column Syntax OID
hh3cDhcpSnoopTrustStatus
Trusted status of current port which supports both get and
set operation.
Enumerationr/w
Enumerated Values:
0untrusted
1trusted
 .1.3.6.1.4.1.25506.2.36.1.3.1.1

hh3cDhcpSnoopVlanTable

table
.1.3.6.1.4.1.25506.2.36.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDhcpSnoopVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPSNOOP-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPSNOOP-MIB::hh3cDhcpSnoopVlanTable' 
A table is used to configure and monitor DHCP Snooping
status of VLANs.
hh3cDhcpSnoopVlanEntry row .1.3.6.1.4.1.25506.2.36.1.4.1
The entry information about hh3cDhcpSnoopVlanTable.
Indexes
Column Syntax OID
hh3cDhcpSnoopVlanIndex
Current VLAN index.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.25506.2.36.1.4.1.1
hh3cDhcpSnoopVlanEnable
DHCP Snooping status of current VLAN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.25506.2.36.1.4.1.2