HH3C-DHCPRELAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
18

hh3cDHCPRIfSelectTable

table
.1.3.6.1.4.1.25506.2.58.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRIfSelectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRIfSelectTable' 
A table for configuring relay mode
for interfaces.
hh3cDHCPRIfSelectEntry row .1.3.6.1.4.1.25506.2.58.1.1.1
An entry for configuring relay mode for an
interface.
Indexes
Column Syntax OID
hh3cDHCPRIfSelectRelayMode
If the value is on, the DHCP relay function
would be enabled on this interface.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.25506.2.58.1.1.1.1

hh3cDHCPRIpToGroupTable

table
.1.3.6.1.4.1.25506.2.58.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRIpToGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRIpToGroupTable' 
A table for configuring ip addresses for DHCP
server groups.
hh3cDHCPRIpToGroupEntry row .1.3.6.1.4.1.25506.2.58.1.2.1
An entry for configuring ip addresses for a DHCP
server group.
Indexes
Column Syntax OID
hh3cDHCPRIpToGroupGroupId
Group identifier of DHCP server group.
Integer32
Constraints:
range: 0-19
 .1.3.6.1.4.1.25506.2.58.1.2.1.1
hh3cDHCPRIpToGroupServerIpType
Ip address type of DHCP server.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.58.1.2.1.2
hh3cDHCPRIpToGroupServerIp
Ip address of DHCP server.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.25506.2.58.1.2.1.3
hh3cDHCPRIpToGroupRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.58.1.2.1.4

hh3cDHCPRIfToGroupTable

table
.1.3.6.1.4.1.25506.2.58.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRIfToGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRIfToGroupTable' 
A table for configuring DHCP server groups
for interfaces.
hh3cDHCPRIfToGroupEntry row .1.3.6.1.4.1.25506.2.58.1.3.1
An entry for configuring DHCP server group for
an interface.
Indexes
Column Syntax OID
hh3cDHCPRIfToGroupGroupId
The DHCP server group for this interface.
Integer32r/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.25506.2.58.1.3.1.1
hh3cDHCPRIfToGroupRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.58.1.3.1.2

hh3cDHCPRAddrCheckTable

table
.1.3.6.1.4.1.25506.2.58.1.4 · 1 row entry · 1 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRAddrCheckTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRAddrCheckTable' 
A table containing the states of dhcp security address
check switchs for interfaces.
hh3cDHCPRAddrCheckEntry row .1.3.6.1.4.1.25506.2.58.1.4.1
An entry containing the state of dhcp security address
check switch for an interface.
Indexes
Column Syntax OID
hh3cDHCPRAddrCheckSwitch
The state of dhcp security address check switch for
this interface.
It has two defined values: enabled and disabled.
If the value is enabled, the address check function
would be enabled. The default value is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.2.58.1.4.1.1

hh3cDHCPRSecurityTable

table
.1.3.6.1.4.1.25506.2.58.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRSecurityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRSecurityTable' 
A table containing the information of
DHCP security.
hh3cDHCPRSecurityEntry row .1.3.6.1.4.1.25506.2.58.1.5.1
An entry containing the information of
DHCP security.
Indexes
Column Syntax OID
hh3cDHCPRSecurityClientIpAddrType
DHCP client's net ip address type
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.2.58.1.5.1.1
hh3cDHCPRSecurityClientIpAddr
DHCP client's net ip address
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.25506.2.58.1.5.1.2
hh3cDHCPRSecurityClientMacAddr
DHCP client's mac address
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.58.1.5.1.3
hh3cDHCPRSecurityClientProperty
Property of client address
Enumerationr/w
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.25506.2.58.1.5.1.4
hh3cDHCPRSecurityClientRowStatus
Operation status of this table entry.
Three actions are used: active,
createAndGo, destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.58.1.5.1.5

hh3cDHCPRConfigOption82IfTable

table
.1.3.6.1.4.1.25506.2.58.1.8.3 · 1 row entry · 5 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDHCPRConfigOption82IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-DHCPRELAY-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-DHCPRELAY-MIB::hh3cDHCPRConfigOption82IfTable' 
A table containing the information of DHCP
option 82.
This table depends on hh3cDHCPRIfToGroupTable.
An entry of this table will be created when
an entry of hh3cDHCPRIfToGroupTable is created.
hh3cDHCPRConfigOption82IfEntry row .1.3.6.1.4.1.25506.2.58.1.8.3.1
An entry containing the information of
DHCP option 82.
Indexes
Column Syntax OID
hh3cDHCPROption82IfSwitch
If DHCP relay supports option 82 functions, the
value is 'enabled'.
If DHCP relay does not support option 82 functions,
the value is 'disabled'.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.25506.2.58.1.8.3.1.1
hh3cDHCPROption82IfStrategy
The strategies of DHCP relay handling option 82.

'drop' indicates DHCP relay discarding the request
packet including option 82.

'keep' indicates DHCP relay accepting the request
packet with…
Enumerationr/w
Enumerated Values:
1drop
2keep
3replace
 .1.3.6.1.4.1.25506.2.58.1.8.3.1.2
hh3cDHCPROption82IfFormat
The format of DHCP relay option 82.

'normal' is the standard format.

'verbose' is the detailed format.
Enumerationr/w
Enumerated Values:
1normal
2verbose
 .1.3.6.1.4.1.25506.2.58.1.8.3.1.3
hh3cDHCPROption82IfNodeType
Property of DHCP relay option 82 verbose format.
The value can be set by user only when the value
of hh3cDHCPROption82IfFormat is set with 'verbose'.

If the value of hh3cDHCPROption82IfFormat is
'normal',…
Enumerationr/w
Enumerated Values:
1invalid
2mac
3sysname
4userdefine
 .1.3.6.1.4.1.25506.2.58.1.8.3.1.4
hh3cDHCPROption82IfUsrDefString
The string defined by user to fill in the
option 82 verbose format. If the value of
hh3cDHCPROption82IfFormat is 'normal', or the
value of hh3cDHCPROption82IfNodeType is 'mac'
or 'sysname', it is set with a null string
…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.25506.2.58.1.8.3.1.5