H3C-SYS-MAN-MIB Table View

The current status of system. A configuration file, an image
file and bootrom information are used to describe the current status.

h3cSysCurEntry row .1.3.6.1.4.1.2011.10.2.3.1.2.1.1

An entry of h3cSysCurTable.

Indexes

h3cSysCurEntPhysicalIndex

Column	Syntax	OID
h3cSysCurEntPhysicalIndex The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has o…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.2.1.1.1
h3cSysCurCFGFileIndex The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.2.1.1.2
h3cSysCurImageIndex The image file currently used by the specified entity. It will be the value of corresponding h3cSysImageIndex in h3cSysImageTable.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.2.1.1.3
h3cSysCurBtmFileName The bootrom file currently used by the specified entity.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2011.10.2.3.1.2.1.1.4
h3cSysCurUpdateBtmFileName The default value of this object is the same as the value of h3cSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This bootrom will take effect on next startup.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2011.10.2.3.1.2.1.1.5

A reload parameters set table.
          
The table is exclusively used for reloading.
          
When reloading action finished, the value of the table may be empty or still exist.
If the mainboard in non-XRN device or all the units of the fabric in XRN device are
reloaded,then the table will be refreshed.

h3cSysReloadScheduleEntry row .1.3.6.1.4.1.2011.10.2.3.1.3.3.1

Entry of h3cSysReloadScheduleTable.

Indexes

h3cSysReloadScheduleIndex

Column	Syntax	OID
h3cSysReloadScheduleIndex The index of h3cSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.1
h3cSysReloadEntity The value of h3cSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.2
h3cSysReloadCfgFile The value indicates an entry in h3cSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding h3cSysCFGFileIndex in h3cSysCFGFileTable. The zero value means no configuration fil…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.3
h3cSysReloadImage The value indicates an entry in h3cSysImageTable. It defines an image file for reload action. It is the value of corresponding h3cSysImageIndex in h3cSysImageTable. If dual image is supported, the main im…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.4
h3cSysReloadReason The reason of system's reloading. It is a zero length octet string when not set.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.5
h3cSysReloadScheduleTime Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled interval between the specif…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.6
h3cSysReloadRowStatus If one of the value of h3cSysReloadEntity,h3cSysReloadImage is invalid, the value of h3cSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry means the specified element is available in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.7
h3cSysReloadScheduleTagList It specifies a tag list for the entry.	SNMP-TARGET-MIBSnmpTagListr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.3.1.3.3.1.8

The system image management table.
          
          
When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed,
then h3cSysImageType of the new file will be 'none'; otherwise h3cSysImageType keeps its current value.
When 'move srcfile destfile' is executed via the CLI, h3cSysImageType and h3cSysImageIndex
 remain the same while h3cSysImageLocation changes.
When 'rename srcfile' is executed via the CLI,h3cSysImageType and h3cSysImageIndex remain the same
while h3cSysImageName changes.
When 'delete srcfile' is executed via the CLI, the file is deleted from h3cSysImageTable
while index of the file keeps and will not be allocated.

h3cSysImageEntry row .1.3.6.1.4.1.2011.10.2.3.1.4.2.1

An entity image entry. Each entry consists of information of an entity image.
The h3cSysImageIndex exclusively defines an image file.

Indexes

h3cSysImageIndex

Column	Syntax	OID
h3cSysImageIndex There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++++++++++ …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.4.2.1.1
h3cSysImageName The file name of the image. It MUST NOT contain the path of the file.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.4.2.1.2
h3cSysImageSize Size of the file in bytes.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.4.2.1.3
h3cSysImageLocation The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices:…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.4.2.1.4
h3cSysImageType It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure…	Enumerationr/w Enumerated Values: 1 main 2 backup 3 none 4 secure 5 main-backup 6 main-secure 7 backup-secure 8 main-backup-secure	.1.3.6.1.4.1.2011.10.2.3.1.4.2.1.5

A table of configuration files in this system.
At present, the system doesn't support dual configure file,
it should act as 'dual image' if dual configure file is
supported.

h3cSysCFGFileEntry row .1.3.6.1.4.1.2011.10.2.3.1.5.2.1

A configuration file entry. Each entry consists of information of
a configuration file.
h3cSysCFGFileIndex exclusively decides a configuration file.

Indexes

h3cSysCFGFileIndex

Column	Syntax	OID
h3cSysCFGFileIndex There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++++++++++++ …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.5.2.1.1
h3cSysCFGFileName Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name and the file name.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.5.2.1.2
h3cSysCFGFileSize Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.5.2.1.3
h3cSysCFGFileLocation The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: …	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.5.2.1.4

This table is used to update the bootrom and show the results of
the update operation.
The bootrom files are listed at the h3cFlhFileTable.  These files
are used to update bootrom.

h3cSysBtmLoadEntry row .1.3.6.1.4.1.2011.10.2.3.1.6.2.1

Entries in the h3cSysBtmLoadTable are created and deleted using
the h3cSysBtmRowStatus object.

When a new row is being created and the number of entries is
h3cSysBtmLoadMaxNumber, the row with minimal value…

Indexes

h3cSysBtmLoadIndex

Column	Syntax	OID
h3cSysBtmLoadIndex The index of h3cSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + rand…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.1
h3cSysBtmFileName The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. If the file is invalid, the bootrom should fa…	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.2
h3cSysBtmFileType main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updated successfully, this object s…	Enumerationr/w Enumerated Values: 1 main 2 none	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.3
h3cSysBtmRowStatus Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of h3cSysBtmFileName and h3cSysBtmFileType can not be modified by users. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.4
h3cSysBtmErrorStatus This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. success(3) - the operation was done successfully. failed…	Enumeration Enumerated Values: 1 invalidFile 2 inProgress 3 success 4 failed	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.5
h3cSysBtmLoadTime This object indicates operation time.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.3.1.6.2.1.6

The system package management table.

h3cSysPackageEntry row .1.3.6.1.4.1.2011.10.2.3.1.7.2.1

An software package entry. Each entry consists of information of
an software package.

Indexes

h3cSysPackageIndex

Column	Syntax	OID
h3cSysPackageIndex There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++++++++++++ …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.1
h3cSysPackageName The file name of the package. It MUST NOT contain the path of the file.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.2
h3cSysPackageSize Size of the file in bytes.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.3
h3cSysPackageLocation The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.4
h3cSysPackageType It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic sys…	Enumeration Enumerated Values: 1 boot 2 system 3 feature 4 patch	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.5
h3cSysPackageAttribute It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value is 'secondary', the package will be used if the primary pac…	Enumerationr/w Enumerated Values: 1 none 2 primary 3 secondary 4 primarySecondary	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.6
h3cSysPackageStatus It indicates the status of the package file. If this file is used in the current system, its status is 'active'.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.7
h3cSysPackageDescription It is the description of the package.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.8
h3cSysPackageFeature Indicate the feature of the package. Different package files could be the same feature.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.9
h3cSysPackageVersion Indicate the version of the package.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.10
h3cSysPackageLoadAttribute File attribute of the startup image for an extended device to load from the parent device. Examples of extended devices include PEXs and firewall modules. The none attribute is returned if the image is not for extende…	Enumerationr/w Enumerated Values: 1 none 2 primary 3 secondary 4 primarySecondary	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.11
h3cSysPackageModel Indicates whether the image file is for an extended device or the parent device. Examples of extended devices include PEXs and firewall modules.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.2011.10.2.3.1.7.2.1.12

A table of package file operate.

h3cSysPackageOperateEntry row .1.3.6.1.4.1.2011.10.2.3.1.7.4.1

An operate request entry.

Indexes

h3cSysPackageOperateIndex

Column	Syntax	OID
h3cSysPackageOperateIndex The unique index value of a row in this table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.7.4.1.1
h3cSysPackageOperatePackIndex Specify the package file in the h3cSysPackageTable.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.7.4.1.2
h3cSysPackageOperateStatus activate or deactivate a package in the h3cSysPackageTable.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.2011.10.2.3.1.7.4.1.3
h3cSysPackageOperateRowStatus the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.7.4.1.4
h3cSysPackageOperateResult the result of the operation.	Enumeration Enumerated Values: 1 opInProgress 2 opSuccess 3 opUnknownFailure 4 opInvalidFile 5 opNotSupport	.1.3.6.1.4.1.2011.10.2.3.1.7.4.1.5

The system IPE file manage table.

h3cSysIpeFileEntry row .1.3.6.1.4.1.2011.10.2.3.1.8.2.1

An IPE package file entry. Each entry consists of information of
an IPE package file.
h3cSysIpeFileIndex exclusively decides an IPE file.

Indexes

h3cSysIpeFileIndex

Column	Syntax	OID
h3cSysIpeFileIndex There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++++++++ …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.8.2.1.1
h3cSysIpeFileName The file name of the IPE file. It MUST NOT contain the path of the file.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.2.1.2
h3cSysIpeFileSize Size of the file in bytes.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.10.2.3.1.8.2.1.3
h3cSysIpeFileLocation The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.2.1.4
h3cSysIpeFileModel Device models for which the IPE file contains software images. For the ease of software upgrade, an IPE file might contain software images for a parent device and extended devices. Examples of extended devices include…	SNMP-TARGET-MIBSnmpTagList Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.3.1.8.2.1.5

The IPE package file table.  It shows the package files in
the IPE file.

h3cSysIpePackageEntry row .1.3.6.1.4.1.2011.10.2.3.1.8.3.1

An entry of the h3cIpePackageTable. Indexed by
h3cSysIpeFileIndex and h3cSysIpePackageIndex.

Indexes

h3cSysIpeFileIndex h3cSysIpePackageIndex

Column	Syntax	OID
h3cSysIpePackageIndex It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value ba…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.1
h3cSysIpePackageName The file name of the package file.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.2
h3cSysIpePackageSize Size of the package file in bytes.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.3
h3cSysIpePackageType It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system …	Enumeration Enumerated Values: 1 boot 2 system 3 feature 4 patch	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.4
h3cSysIpePackageDescription It is the description of the package.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.5
h3cSysIpePackageFeature Indicate the feature of the package.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.6
h3cSysIpePackageVersion The version of the package.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.7
h3cSysIpePackageModel Indicates whether the image package file is for an extended device, the parent device, or both. Examples of extended devices include PEXs and firewall modules.	OctetString Constraints: range: 0-63	.1.3.6.1.4.1.2011.10.2.3.1.8.3.1.8

A table of IPE file operate.

h3cSysIpeFileOperateEntry row .1.3.6.1.4.1.2011.10.2.3.1.8.4.1

An operate request entry.

Indexes

h3cSysIpeFileOperateIndex

Column	Syntax	OID
h3cSysIpeFileOperateIndex The unique index value of a row in this table.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.8.4.1.1
h3cSysIpeFileOperateFileIndex Specify the IPE file in the h3cSysIpeFileTable. This IPE file will be unpacked to package files.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.8.4.1.2
h3cSysIpeFileOperateAttribute It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages in the next reloading procedure. If the value is 'secondary…	Enumerationr/w Enumerated Values: 1 none 2 primary 3 secondary 4 primarySecondary	.1.3.6.1.4.1.2011.10.2.3.1.8.4.1.3
h3cSysIpeFileOperateRowStatus the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.8.4.1.4
h3cSysIpeFileOperateResult the result of the operation.	Enumeration Enumerated Values: 1 opInProgress 2 opSuccess 3 opUnknownFailure 4 opInvalidFile 5 opDeviceFull 6 opFileOpenError	.1.3.6.1.4.1.2011.10.2.3.1.8.4.1.5

Table of images to be set as startup images.  It should be used when
h3cSysBootIpeTable is empty.

h3cSysBootPackageEntry row .1.3.6.1.4.1.2011.10.2.3.1.9.2.1

Entry of the image table.

Indexes

h3cSysBootPackageIndex

Column	Syntax	OID
h3cSysBootPackageIndex Index of the software images. The index must be included in h3cSysPackageTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.9.2.1.1
h3cSysBootPackageRowStatus Row status of the image entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.9.2.1.2

Table of the IPE files to be set for startup.  It should be used when
h3cSysBootPackageTable is empty.

h3cSysBootIpeEntry row .1.3.6.1.4.1.2011.10.2.3.1.9.3.1

Entry in the IPE file table.

Indexes

h3cSysBootIpeIndex

Column	Syntax	OID
h3cSysBootIpeIndex IPE file index. The index must be included in h3cSysIpeFileTable.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2011.10.2.3.1.9.3.1.1
h3cSysBootIpeRowStatus Row status of the IPE file table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.3.1.9.3.1.2

Table of startup image operation results.  This table shows the
result for each card.

h3cSysSetBootImageResultEntry row .1.3.6.1.4.1.2011.10.2.3.1.9.4.1

Entry in the startup image operation result table.

Indexes

h3cSysSetBootImageResultIndex

Column	Syntax	OID
h3cSysSetBootImageResultIndex Index of a startup image operation result. It is identical to the entity index of each card.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2011.10.2.3.1.9.4.1.1
h3cSysSetBootImageResultStatusOfEachCard Status of the startup image set operation.	Enumeration Enumerated Values: 1 none 2 doing 3 success 4 failed	.1.3.6.1.4.1.2011.10.2.3.1.9.4.1.2
h3cSysSetBootImageFailedReasonOfEachCard Reason of the startup image set failure for a card. It is empty if the operation was successful.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.3.1.9.4.1.3