H3C-RPR-MIB Table View

This table contains the specs of RPR ring.

h3cRprMaxmumDefineEntry row .1.3.6.1.4.1.2011.10.2.60.1.1.1.1

The entry of RPR Maximum Table.

Indexes

h3cRprMaxMumIfIndex

Column	Syntax	OID
h3cRprMaxMumIfIndex The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.1.1.1.1
h3cRprMaxStationNumDefine Max station number supported by RPR ring.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.1.1.1.2
h3cRprMaxReservedRateDefine Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewher…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.60.1.1.1.1.3

This table contains additional objects
for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.

h3cRprTopoImageXEntry row .1.3.6.1.4.1.2011.10.2.60.1.2.1.1

Each entry contains information specific to a particular
station on the ring. The table has at least one entry for
the station itself, this entry indicates zero hops on each
ringlet.

Indexes

No indexes recorded

Column	Syntax	OID
h3cRprTopoImageXWestEdgeStatus The current edge status of the west span. If an edge exists,the h3cRprTopoImageXWestEdgeStatus is true. Otherwise, the h3cRprTopoImageXWestEdgeStatus is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.60.1.2.1.1.3
h3cRprTopoImageXEastEdgeStatus The current edge status of the east span. If an edge exists, the h3cRprTopoImageXEastEdgeStatus is true. Otherwise, the h3cRprTopoImageXEastEdgeStatus is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.60.1.2.1.1.4
h3cRprTopoImageXStationName The operator assigned station name. The operator can assigned it by h3cRprTopoImageXStationName.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.60.1.2.1.1.5

The RPR Source Mac Count Table contains the cumulative sum
of frames and octects from the particular source station.

h3cRprSrcMacCountEntry row .1.3.6.1.4.1.2011.10.2.60.1.3.1.1

An entry in the RPR Source Mac Count Table.

Indexes

h3cRprSrcMacCountIfIndex h3cRprSrcMacCountBySrcAddress

Column	Syntax	OID
h3cRprSrcMacCountIfIndex The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.3.1.1.1
h3cRprSrcMacCountBySrcAddress MAC address of the source station where the frames come from.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.3.1.1.2
h3cRprSrcMacCountReceivedFrames Frames received from a particular MAC address of source station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.1.1.3
h3cRprSrcMacCountReceivedOctets Octets received from a particular MAC address of source station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.1.1.4

The RPR Destination MAC Count Table contains the cumulative sum
of  frames and octects to the particular destination station.

h3cRprDestMacCountEntry row .1.3.6.1.4.1.2011.10.2.60.1.3.2.1

An entry in the RPR MAC Destination Count Table.

Indexes

h3cRprDestMacCountIfIndex h3cRprDestMacCountByDestAddress

Column	Syntax	OID
h3cRprDestMacCountIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.3.2.1.1
h3cRprDestMacCountByDestAddress MAC address of the destination station where the frames are sent to.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.3.2.1.2
h3cRprDestMacCountReceivedFrames Frames sent to a particular MAC address of destination station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.2.1.3
h3cRprDestMacCountReceivedOctets Octets sent to a particular MAC address of destination station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.2.1.4

The RPR Packet Drop Count Table contains the cumulative sum
of packets dropped for congestion.

h3cRprPktDropCountEntry row .1.3.6.1.4.1.2011.10.2.60.1.3.3.1

An entry in the RPR Packet Drop Count Table.

Indexes

h3cRprPktDropCntIfIndex h3cRprPktDropCntRingletID

Column	Syntax	OID
h3cRprPktDropCntIfIndex The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.1
h3cRprPktDropCntRingletID The RPR Ringlet of the station through which the packets transmit.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.2
h3cRprDownFlowClassAPktDrops The total dropped number of Class A packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.3
h3cRprUpFlowClassAPktDrops The total dropped number of Class A packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.4
h3cRprDownFlowClassBPktDrops The total dropped number of Class B packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.5
h3cRprUpFlowClassBPktDrops The total dropped number of Class B packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.6
h3cRprDownFlowClassCPktDrops The total dropped number of Class C packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.7
h3cRprUpFlowClassCPktDrops The total dropped number of Class C packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.60.1.3.3.1.8

The RPR Static Ring Selection table contains the static
ring selection information by the way of configuration.

h3cRprStaticRSEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.1.1

An entry in the RPR Static Ring Selection table.

Indexes

h3cRprStaticRSIfIndex h3cRprStaticRSMacAddress

Column	Syntax	OID
h3cRprStaticRSIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.1
h3cRprStaticRSMacAddress The MAC address of the station on the ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.2
h3cRprStaticRSRingletID The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.	H3cRprRingletIDr/w Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.3
h3cRprStaticRSTtl The hops from source station to destination station by the selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.4
h3cRprStaticRSValid The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.5
h3cRprStaticRSRowStatus The status of this table entry. The status includes createAndGo, active and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.60.1.4.1.1.6

The RPR Ipv4Dynamic Ring Selection Table that contains the
dynamic ring selection information by shortest path.

h3cRprIpv4DynamicRSEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.2.1

An entry in the RPR Ipv4Dynamic Ring Selection Table.

Indexes

h3cRprIpv4DynamicRSIfIndex h3cRprIpv4DynamicRSMacAddress

Column	Syntax	OID
h3cRprIpv4DynamicRSIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.2.1.1
h3cRprIpv4DynamicRSMacAddress The Ipv4 MAC address of destination station on the ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.2.1.2
h3cRprIpv4DynamicRSRingletID The identifier of the ring which frames are sent from the source station to the destination station.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.2.1.3
h3cRprIpv4DynamicRSTtl The hops from source station to destination station by the selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.4.2.1.4

The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6
ring selection information by dynamic ring selection and static
ring selection.

h3cRprIpv6DynamicRSEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.3.1

An entry in the RPR Ipv6 Ring Selection Table.

Indexes

h3cRprIpv6DynamicRSIfIndex h3cRprIpv6DynamicRSMacAddress

Column	Syntax	OID
h3cRprIpv6DynamicRSIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.3.1.1
h3cRprIpv6DynamicRSMacAddress The Ipv6 MAC address of the destination station on the ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.3.1.2
h3cRprIpv6DynamicRSRingletID The identifier of the ring which frames are sent from the source station to the destination station.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.3.1.3
h3cRprIpv6DynamicRSTtl The hops from source station to destination station by selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.4.3.1.4

The RPR Ipv4 Overall Ring Selection Table that contains the
overall and active  ring selection infomation by dynamic ring
selection and static ring selection.

h3cRprIpv4OverallRSEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.4.1

An entry in the RPR Overall Ring Selection Table.

Indexes

h3cRprIpv4OverallRSIfIndex h3cRprIpv4OverallRSMacAddress

Column	Syntax	OID
h3cRprIpv4OverallRSIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.4.1.1
h3cRprIpv4OverallRSMacAddress The MAC address of the destination station on the ring.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.4.1.2
h3cRprIpv4OverallRSType The ring selection item type indicates static or dynamic.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.2011.10.2.60.1.4.4.1.3
h3cRprIpv4OverallRSRingletID The identifier of the ring which frames are sent from the source station to the destination station.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.4.1.4
h3cRprIpv4OverallRSTtl The hops from source station to destination station by selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.4.4.1.5

The RPR VRRP Ring Selection Table that contains the ring
selection information when the vrrp group is configured.

h3cRprVrrpRSEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.5.1

An entry in the RPR VRRP Ring Selection Table.

Indexes

h3cRprVrrpRSIfIndex h3cRprVrrpRSVirtualMacAddress

Column	Syntax	OID
h3cRprVrrpRSIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.5.1.1
h3cRprVrrpRSVirtualMacAddress The virtual MAC address of the staion in VRRP group.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.5.1.2
h3cRprVrrpRSMacAddress The MAC address of the station that is the master in VRRP group.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.4.5.1.3
h3cRprVrrpRSRingletID The identifier of the ring which frames are sent from the source station to the destination station.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.5.1.4
h3cRprVrrpRSTtl The hops from source station to destination station by selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.4.5.1.5

The RPR Default RingID Table specify the default ringID.

h3cRprDefaultRingIDEntry row .1.3.6.1.4.1.2011.10.2.60.1.4.6.1

An entry in the RPR Default RingID Table.

Indexes

h3cRprDefaultRingIDIfIndex

Column	Syntax	OID
h3cRprDefaultRingIDIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.4.6.1.1
h3cRprDefaultConfigRingletID The default identifier of the ring configured by user.	H3cRprRingletIDr/w Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.6.1.2
h3cRprDefaultActiveRingID The identifier of the default ring which is active currently. The default ring configured by user may be inactive.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.4.6.1.3

The RPR Defect Report Table that contains the trap information on
the ring.

h3cRprDefectReportEntry row .1.3.6.1.4.1.2011.10.2.60.1.5.1.1

An entry in the RPR Defect Report Table.

Indexes

h3cRprDefectIfIndex

Column	Syntax	OID
h3cRprDefectIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.5.1.1.1
h3cRprDefectCurrentStatus Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.	Bits Enumerated Values: 0 topologyOpenRing 1 topoInstability 2 topoInconsistent 3 dulpMacAddress 4 dulpIPAddress 5 lrttDefect 6 protCfgDefect 7 jumboCfgDefect 8 excessReservedRateDefect 9 excessMaxStationNum 10 miscabling 11 backPressure	.1.3.6.1.4.1.2011.10.2.60.1.5.1.1.2

The Table is for Class Of Service and RPR Service Class Mapping.

h3cRprPriority2ClassMapEntry row .1.3.6.1.4.1.2011.10.2.60.1.6.1.1

An entry in the COS to Service Class Map Table.

Indexes

h3cRprPriority2ClassMapIfIndex h3cRprPriority2ClassMapType h3cRprPriorityValue

Column	Syntax	OID
h3cRprPriority2ClassMapIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.6.1.1.1
h3cRprPriority2ClassMapType The type of Priority,include tag, mpls, ip.	Enumeration Enumerated Values: 1 tag 2 mpls 3 ip	.1.3.6.1.4.1.2011.10.2.60.1.6.1.1.2
h3cRprPriorityValue The priority of tag,mpls and ip, the value range is 0~7.	Enumeration Enumerated Values: 1 pri0 2 pri1 3 pri2 4 pri3 5 pri4 6 pri5 7 pri6 8 pri7	.1.3.6.1.4.1.2011.10.2.60.1.6.1.1.3
h3cRprPriority2ClassMap The RPR service class.	H3cRprServiceClassr/w Type Values: 1 classC 2 classB 3 classA1 4 classA0	.1.3.6.1.4.1.2011.10.2.60.1.6.1.1.4

The RPR Rate Limit Configuration Table that contains the rate
limit infomation of RPR serviec class.

h3cRprRateLimitConfigEntry row .1.3.6.1.4.1.2011.10.2.60.1.7.1.1

An entry in the RPR Rate Limit Configuration Table.

Indexes

h3cRprRateLimitConfigIfIndex h3cRprRateLimitConfigRingletId h3cRprRateLimitConfigServiceClass

Column	Syntax	OID
h3cRprRateLimitConfigIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.7.1.1.1
h3cRprRateLimitConfigRingletId The identifier of the ring of RPR ringlet.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.7.1.1.2
h3cRprRateLimitConfigServiceClass The RPR service class.	H3cRprServiceClass Type Values: 1 classC 2 classB 3 classA1 4 classA0	.1.3.6.1.4.1.2011.10.2.60.1.7.1.1.3
h3cRprRateLimitConfigValue The value of rate-limit that configured for diffrent service class. The unit is permillage.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.7.1.1.4

The RPR MAC Address Table.

h3cRprMacLearnCfgEntry row .1.3.6.1.4.1.2011.10.2.60.1.8.1.1

The entry of RPR MAC Address Table.

Indexes

h3cRprMacLearnIfIndex h3cRprMacLearnRprMac

Column	Syntax	OID
h3cRprMacLearnIfIndex The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.1
h3cRprMacLearnRprMac The MAC address of the RPR station.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.2
h3cRprMacLearnType The type of MAC address item that the user built. The type includes static and dynamic.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.3
h3cRprMacLearnDestMac The destination of MAC address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.4
h3cRprMacLearnVlanId The vlan ID that the MAC address learned from by RPR staion.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.5
h3cRprMacLearnRinglet The identifier of the ring which frames are sent from the source station to the destination station.	H3cRprRingletIDr/w Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.6
h3cRprMacLearnTtl The hops from source station to destination station on the selected ringlet.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.7
h3cRprMacLearnIsValid The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.8
h3cRprMacLearnRowStatus The status of this table entry. The status includes createAndGo, active and destroy.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.60.1.8.1.1.9

The RPR Defect Report Table that contains varible that
used to bind in trap.

h3cRprTrapVarEntry row .1.3.6.1.4.1.2011.10.2.60.1.9.1.1

An entry in the RPR Trap Var Table.

Indexes

h3cRprTrapIfIndex

Column	Syntax	OID
h3cRprTrapIfIndex The ifIndex of RPR interface. It is only used for trap to bind.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.10.2.60.1.9.1.1.1
h3cRprTrapRinglet The span of RPR station. It is only used for trap to bind.	H3cRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.2011.10.2.60.1.9.1.1.2
h3cRprTrapTopoMacAddress The MAC address of RPR station. It is only used for trap to bind.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.60.1.9.1.1.3
h3cRprTrapIpAddress The IP address of RPR station. It is only used for trap to bind.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.60.1.9.1.1.4