H3C-PPP-OVER-SONET-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
28
h3cPosParamTable
table
.1.3.6.1.4.1.2011.10.2.19.1.1
·
1 row entry
·
28 columns
Uses the h3c variant from
Command help
/opt/observium/mibs/h3c.
Walk h3cPosParamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-PPP-OVER-SONET-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-PPP-OVER-SONET-MIB::h3cPosParamTable'
The pos parameter table.
The entry of pos table.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The length of CRC
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.1 |
||||||||
|
Maximum Transfer Unit (MTU) of POS interface
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.2 |
||||||||
|
Scrambling is used to avoid continuous 0 or 1 in signals. This
object is to decide whether to scramble or not |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.3 |
||||||||
|
The value indicates the source of clock signal. System indicates
that clock signals are from device itself and line for clock signals from remote |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.4 |
||||||||
|
The section trace byte. This node is used when the frame type is sdh.
|
OctetStringr/w Constraints: range: 0-15 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.5 |
||||||||
|
The path trace byte. This node is used when the frame type is sdh.
|
OctetStringr/w Constraints: range: 0-15 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.6 |
||||||||
|
The section trace byte. This node is used when the frame type is sonet.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.7 |
||||||||
|
The path trace byte. This node is used when the frame type is sonet.
|
OctetStringr/w Constraints: range: 0-62 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.8 |
||||||||
|
The parameter for the channel signal value of C2 byte
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.9 |
||||||||
|
The frame type that encapsulates the packet. Default frame type is
sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.10 |
||||||||
|
The vlan that this pos port binds. The vlan can not include any other
port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link… |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.11 |
||||||||
|
The type of encapsulation
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.12 |
||||||||
|
The keeplive of ppp, hdlc, fr or mfr. It is the query interval of link status. Two
members of a link should have same keeplive. The default 0 prohibits detecting status of link. |
Integer32r/w Constraints: range: 0-32767 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.13 |
||||||||
|
The bit-error rate threshold for Signal Fault. SF threshold should
be greater than SD threshold. |
Integer32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.14 |
||||||||
|
The bit-error rate threshold for Signal Degrade. SD threshold should
be less than SF threshold. |
Integer32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.15 |
||||||||
|
Counter for SBIPE(Section Bit Interleave Parity Error)
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.16 |
||||||||
|
Counter for LBIPE(Line Bit Interleave Parity Error)
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.17 |
||||||||
|
Counter for PBIPE(Path Bit Interleave Parity Error)
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.18 |
||||||||
|
How many times does LREI(Line Remote Error Indication) occur
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.19 |
||||||||
|
How many times does PREI(Path Remote Error Indication) occur
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.20 |
||||||||
|
The frame type that encapsulates the flag J0. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.21 |
||||||||
|
The frame type that encapsulates the flag J1. Default frame type is
sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.22 |
||||||||
|
Threshold for B1 TCA.
|
Integer32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.23 |
||||||||
|
Threshold for B2 TCA.
|
Integer32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.24 |
||||||||
|
Threshold for B3 TCA.
|
Integer32r/w Constraints: range: 3-9 |
.1.3.6.1.4.1.2011.10.2.19.1.1.1.25 |
||||||||
|
Enable traps of B1 TCA.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.26 |
||||||||
|
Enable traps of B2 TCA.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.27 |
||||||||
|
Enable traps of B3 TCA.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2011.10.2.19.1.1.1.28 |
