H3C-NQA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
176

h3cNqaCtlTable

table
.1.3.6.1.4.1.2011.10.8.3.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaCtlTable' 
Defines the NQA Control Extend Table for providing, via SNMP,
the capability of performing network analysis operations at a
remote host.
h3cNqaCtlEntry row .1.3.6.1.4.1.2011.10.8.3.1.2.1
Defines an entry in the h3cNqaCtlTable. The operation of this
table is same as that of pingResultsTable.
Indexes
No indexes recorded
Column Syntax OID
h3cNqaCtlTargetPort
The destination port that may be used by udpEcho,
tcpConnect and jitter probes.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.1
h3cNqaCtlSourcePort
The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.2
h3cNqaCtlTTL
Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.3
h3cNqaCtlJitterAdminInterval
Time value in milliseconds that is an interval between two continuous
probes in jitter test.

This object is only used by jitter test.
millisecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.4
h3cNqaCtlJitterAdminNumPackets
Packet number that specifys how many packets will be sent in
one jitter test.

This object is only used by jitter test.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.5
h3cNqaCtlHttpOperationType
Http operation type: get, post or raw.
Enumerationr/w
Enumerated Values:
1get
2post
3raw
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.6
h3cNqaCtlHttpOperationString
Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version.
OctetStringr/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.7
h3cNqaCtlFtpOperationType
Ftp operation type.
Enumerationr/w
Enumerated Values:
1get
2put
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.8
h3cNqaCtlFtpUsername
Ftp username.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.9
h3cNqaCtlFtpPassword
Ftp password.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.10
h3cNqaCtlFtpOperationString
Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.11
h3cNqaCtlVPNInstance
VPN name by which system finds route in the specified VPN
to send NQA probe packets.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.12
h3cNqaCtlHistoryKeptTime
To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped.
minutesInteger32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.13
h3cNqaCtlHistoryEnable
To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.14
h3cNqaCtlICPIFAdvFactor
The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values. This is applicable
only for the…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.15
h3cNqaCtlCodecType
To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe.
Enumerationr/w
Enumerated Values:
1notDefined
2g711Alaw
3g711Ulaw
4g729A
5icmpTimestamp
 .1.3.6.1.4.1.2011.10.8.3.1.2.1.16

h3cNqaResultsTable

table
.1.3.6.1.4.1.2011.10.8.3.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaResultsTable' 
Defines the NQA Results Extend Table for providing
the capability of performing NQA operations at a remote
host. The results of these operations are stored in the
h3cNqaResultsTable. The operation of this table is same
as that of pingResultsTable.
h3cNqaResultsEntry row .1.3.6.1.4.1.2011.10.8.3.1.3.1
The operation of this table is same as that of pingResultsTable.
Indexes
Column Syntax OID
h3cNqaResultsRttNumDisconnects
The number of times that a NQA probe failed because
the destination became disconnected.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.1
h3cNqaResultsRttTimeouts
The number of times that a NQA probe failed because the
probe timed out.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.2
h3cNqaResultsRttBusies
The number of times that a NQA probe failed because all
NQA tasks have been running.

If a new probe fails to start, the value of this object
is incremented. The next test will not start until the
next Fre…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.3
h3cNqaResultsRttNoConnections
The number of times that a NQA probe failed because the probe
destination is unavailable.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.4
h3cNqaResultsRttDrops
The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.5
h3cNqaResultsRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.6
h3cNqaResultsRttStatsErrors
The number of some other errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.7
h3cNqaResultsMaxDelaySD
The maximal delay from source device to destination device.
Currently this value is only used for jitter test, and this
value must be 0 in other type test. In jitter test, if
destination system time is not valid, the SD…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.8
h3cNqaResultsMaxDelayDS
The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destination
system time is not valid, the DS dela…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.9
h3cNqaResultsLostPacketRatio
The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.10
h3cNqaResultsPacketLateArrival
The value of this object indicates the number of the packets that
arrived after the timeout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.11
h3cNqaResultsRttSum
The sum of round trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.12
h3cNqaResultsNumOfDelaySD
The number of delay from source to destination that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.13
h3cNqaResultsMinDelaySD
The minimum of all one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.14
h3cNqaResultsSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.15
h3cNqaResultsSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.16
h3cNqaResultsNumOfDelayDS
The number of delay from destination to source that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.17
h3cNqaResultsMinDelayDS
The minimum of all one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.18
h3cNqaResultsSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.19
h3cNqaResultsSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.3.1.20

h3cNqaJitterStatsTable

table
.1.3.6.1.4.1.2011.10.8.3.1.4 · 1 row entry · 32 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaJitterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaJitterStatsTable' 
Statistics table for latest jitter activity.
h3cNqaJitterStatsEntry row .1.3.6.1.4.1.2011.10.8.3.1.4.1
An entry contains the statistics for the latest jitter activity.
This entry is created only if the pingCtlType is h3cNqajitter.
Indexes
Column Syntax OID
h3cNqaJitterStatsNumOfRTT
The number of received destination device responses with which
jitter test can reach round-trip time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.1
h3cNqaJitterStatsMinOfPositivesSD
The value of time that records the minimal positive jitter value from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.2
h3cNqaJitterStatsMaxOfPositivesSD
The value of time that records the maximal positive jitter value from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.3
h3cNqaJitterStatsNumOfPositivesSD
The number that records positive jitter times from source to
destination in the jitter test.
The total number of the value of all positive jitters in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.4
h3cNqaJitterStatsSumOfPositivesSD
The value of time that records the sum of positive jitter values from
source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.5
h3cNqaJitterStatsSum2PositivesSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.6
h3cNqaJitterStatsMinOfNegativesSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.7
h3cNqaJitterStatsMaxOfNegativesSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.8
h3cNqaJitterStatsNumOfNegativesSD
The number that records negative jitter times from source to
destination in the jitter test.
The total number of all negative jitter values in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.9
h3cNqaJitterStatsSumOfNegativesSD
The value of time that records the sum of negative jitter values from
source to destination in the jitter test.
The total number of the value of all negative jitters in packets
sent from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.10
h3cNqaJitterStatsSum2NegativesSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.11
h3cNqaJitterStatsMinOfPositivesDS
The value of time that records the minimal positive jitter value from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.12
h3cNqaJitterStatsMaxOfPositivesDS
The value of time that records the maximal positive jitter value from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.13
h3cNqaJitterStatsNumOfPositivesDS
The number that records positive jitter times from destination to
source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.14
h3cNqaJitterStatsSumOfPositivesDS
The value of time that records the sum of positive jitter values from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.15
h3cNqaJitterStatsSum2PositivesDS
The value of time that records the sum of square of positive jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.16
h3cNqaJitterStatsMinOfNegativesDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.17
h3cNqaJitterStatsMaxOfNegativesDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.18
h3cNqaJitterStatsNumOfNegativesDS
The number that records negative jitter times from destination to source
in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.19
h3cNqaJitterStatsSumOfNegativesDS
The value of time that records the sum of negative jitter values from
destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.20
h3cNqaJitterStatsSum2NegativesDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.21
h3cNqaJitterStatsPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.22
h3cNqaJitterStatsPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.23
h3cNqaJitterStatsAvePositivesSD
The value of time that records the average positive jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.24
h3cNqaJitterStatsAveNegativesSD
The value of time that records the average negative jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.25
h3cNqaJitterStatsAvePositivesDS
The value of time that records the average positive jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.26
h3cNqaJitterStatsAveNegativesDS
The value of time that records the average negative jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.27
h3cNqaJitterStatsPktLossUnknown
The number of packets which is lost with unknown reason.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.28
h3cNqaJitterStatsOperOfICPIF
The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.29
h3cNqaJitterStatsOperOfMOS
The MOS (Mean Opinion Score) value for the latest jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.30
h3cNqaJitterStatsAveSD
The value of time that records the average jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.31
h3cNqaJitterStatsAveDS
The value of time that records the average jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.4.1.32

h3cNqaTcpServerTable

table
.1.3.6.1.4.1.2011.10.8.3.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaTcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaTcpServerTable' 
A table which contains the status of NQA tcp server
configuration information.
h3cNqaTcpServerEntry row .1.3.6.1.4.1.2011.10.8.3.1.6.1
A table which contains the status of NQA tcp server
configuration information.

This entry includes not only the tcp server ip address
but also the tcp server port.
Indexes
Column Syntax OID
h3cNqaTcpServerIpAddress
Tcp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.8.3.1.6.1.1
h3cNqaTcpServerPort
Tcp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.6.1.2
h3cNqaTcpServerRowStatus
h3cNqaTcpServerIpAddress and h3cNqaTcpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.8.3.1.6.1.3

h3cNqaUdpServerTable

table
.1.3.6.1.4.1.2011.10.8.3.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaUdpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaUdpServerTable' 
Status of NQA udp server configuration information.
h3cNqaUdpServerEntry row .1.3.6.1.4.1.2011.10.8.3.1.7.1
This entry includes not only the udp server ip address
but also the udp server udp port.
Indexes
Column Syntax OID
h3cNqaUdpServerIpAddress
Udp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.8.3.1.7.1.1
h3cNqaUdpServerPort
Udp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.7.1.2
h3cNqaUdpServerRowStatus
h3cNqaUdpServerIpAddress and h3cNqaUdpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.8.3.1.7.1.3

h3cNqaStatisticsCtlTable

table
.1.3.6.1.4.1.2011.10.8.3.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaStatisticsCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaStatisticsCtlTable' 
Defines the NQA statistics control table for providing, via SNMP,
the capability of performing NQA operations at a remote host.
The results of these operations are stored in the
h3cNqaStatisticsResultsTable and the h3cNqaGroupStatsJitterTable.
h3cNqaStatisticsCtlEntry row .1.3.6.1.4.1.2011.10.8.3.1.10.1
Defines an entry in the h3cNqaStatisticsCtlTable.
The h3cNqaStatisticsCtlTable has the same index as the
pingCtlTable in order for a h3cNqaStatisticsCtlTable to
correspond to the pingCtlEntry.
Indexes
No indexes recorded
Column Syntax OID
h3cNqaCtlStatisticsInterval
Statistic information will be calculated after the time that is
the value of h3cNqaCtlStatisticsInterval.
minutesSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.10.1.1
h3cNqaCtlStatisticsGroupNumber
The value of this object indicates the number of group saved.
The length of this object is from 1 to h3cNqaStatsMaxGroupNumber.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.10.1.2
h3cNqaCtlStatisticsKeptTime
To indicate how long the statistic information will be saved after
the test stops.
minutesUnsigned32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.2011.10.8.3.1.10.1.3
h3cNqaCtlBeginTime
Time at which the type-specified test will start.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.10.8.3.1.10.1.4
h3cNqaCtlLifeTime
To indicate how long the type-specified test will last.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.10.1.5

h3cNqaStatisticsResultsTable

table
.1.3.6.1.4.1.2011.10.8.3.1.11 · 1 row entry · 31 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaStatisticsResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaStatisticsResultsTable' 
Defines the NQA statistics results table for providing
the capability of performing NQA operations at a remote
host. The statistics results of these operations in a statistic cycle
are stored in the h3cNqaStatisticsResultsTable. The statistic cycle is
the value of h3cNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that the probe statistics
result (H3cNqaStatisticsResultsEntry) belongs to.
h3cNqaStatisticsResultsEntry row .1.3.6.1.4.1.2011.10.8.3.1.11.1
Defines an entry in the h3cNqaStatisticsResultsTable. The
h3cNqaStatisticsResultsTable has the same index as the
pingCtlTable in order for a h3cNqaStatisticsResultsEntry to
correspond to the pingCtlEntry that caused it …
Indexes
Column Syntax OID
h3cNqaStatResIndex
An entry in this table is created when the statistics
result of a NQA probe is determined.

An implementation MUST start assigning
h3cNqaStatResIndex values at 1 and wrap after
exceeding the maximum possib…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.1
h3cNqaStatResIpTargetAddressType
This object indicates the type of address stored
in the corresponding h3cNqaStatResIpTargetAddress
object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.2
h3cNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for
performing a network analysis operation.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.3
h3cNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.4
h3cNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.5
h3cNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.6
h3cNqaStatResProbeResponses
The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.7
h3cNqaStatResSentProbes
The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent.
probesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.8
h3cNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.9
h3cNqaStatResStartTime
This object contains the start time of the statistic.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.10
h3cNqaStatResInterval
This object contains the interval between two times of statistic.
secondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.11
h3cNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.12
h3cNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.13
h3cNqaStatResRttBusies
The number of times that a NQA probe failed because
errors related to sockets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.14
h3cNqaStatResRttNoConnections
The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.15
h3cNqaStatResRttDrops
The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.16
h3cNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.17
h3cNqaStatResRttErrors
The number of other errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.18
h3cNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.19
h3cNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that
arrived after the timeout.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.20
h3cNqaStatResRttSum
This object contains the sum for all NQA responses received
during the test lifetime. The value of this object MUST be
reported as 0 when no NQA responses have been received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.21
h3cNqaStatResNumOfDelaySD
The number of one way times from source to destination that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.22
h3cNqaStatResMinDelaySD
The minimum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.23
h3cNqaStatResMaxDelaySD
The maximum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.24
h3cNqaStatResSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.25
h3cNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.26
h3cNqaStatResNumOfDelayDS
The number of one way times from destination to source that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.27
h3cNqaStatResMinDelayDS
The minimum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.28
h3cNqaStatResMaxDelayDS
The maximum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.29
h3cNqaStatResSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.30
h3cNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.11.1.31

h3cNqaGroupStatsJitterTable

table
.1.3.6.1.4.1.2011.10.8.3.1.12 · 1 row entry · 34 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaGroupStatsJitterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaGroupStatsJitterTable' 
Test Group Statistic table for jitter activity in a statistic cycle.
The statistic cycle is the value of h3cNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that a probe statistics
result (H3cNqaStatisticsResultsEntry) belongs to.
h3cNqaGroupStatsJitterEntry row .1.3.6.1.4.1.2011.10.8.3.1.12.1
An entry contains the group statistic information for jitter activity.
This entry is created only if the pingCtlType is h3cNqajitter.
Indexes
Column Syntax OID
h3cNqaStatJitterIndex
An entry in this table is created when the statistic
result of a NQA probe in a statistic cycle is determined.

An implementation MUST start assigning h3cNqaStatJitterIndex
values at 1 and wrap after excee…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.1
h3cNqaStatJitterMinOfPosSD
The value of time that records the minimal positive jitter value
from source to destination in jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.2
h3cNqaStatJitterMaxOfPosSD
The value of time that records the maximal positive jitter value
from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.3
h3cNqaStatJitterNumOfPosSD
The total number of positive jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.4
h3cNqaStatJitterSumOfPosSD
The value of time that records the sum of positive jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.5
h3cNqaStatJitterSumOfSquarePosSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.6
h3cNqaStatJitterMinOfNegSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.7
h3cNqaStatJitterMaxOfNegSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.8
h3cNqaStatJitterNumOfNegSD
The total number of negative jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.9
h3cNqaStatJitterSumOfNegSD
The value of time that records the sum of negative jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.10
h3cNqaStatJitterSumOfSquareNegSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.11
h3cNqaStatJitterMinOfPosDS
The value of time that records the minimal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.12
h3cNqaStatJitterMaxOfPosDS
The value of time that records the maximal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.13
h3cNqaStatJitterNumOfPosDS
The total number of positive jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.14
h3cNqaStatJitterSumOfPosDS
The value of time that records the sum of positive jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.15
h3cNqaStatJitterSumOfSquarePosDS
The value of time that records the sum of square of positive jitter
values destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.16
h3cNqaStatJitterMinOfNegDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.17
h3cNqaStatJitterMaxOfNegDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.18
h3cNqaStatJitterNumOfNegDS
The total number of negative jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.19
h3cNqaStatJitterSumOfNegDS
The value of time that records the sum of negative jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.20
h3cNqaStatJitterSumOfSquareNegDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.21
h3cNqaStatJitterPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.22
h3cNqaStatJitterPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.23
h3cNqaStatJitterAvePosSD
The value of time that records the average positive jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.24
h3cNqaStatJitterAveNegSD
The value of time that records the average negative jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.25
h3cNqaStatJitterAvePosDS
The value of time that records the average positive jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.26
h3cNqaStatJitterAveNegDS
The value of time that records the average negative jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.27
h3cNqaStatJitterPktLossUnknown
The number of packets which is lost with unknown reason.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.28
h3cNqaStatJitterMaxOfICPIF
The maximum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.29
h3cNqaStatJitterMinOfICPIF
The minimum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.30
h3cNqaStatJitterMaxOfMOS
The maximum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.31
h3cNqaStatJitterMinOfMOS
The minimum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.32
h3cNqaStatJitterAveSD
The value of time that records the average jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.33
h3cNqaStatJitterAveDS
The value of time that records the average jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.12.1.34

h3cNqaReactionTable

table
.1.3.6.1.4.1.2011.10.8.3.1.13 · 1 row entry · 14 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
h3cNqaReactionEntry row .1.3.6.1.4.1.2011.10.8.3.1.13.1
Defines an entry in the h3cNqaReactionTable. The first two index
elements identify the pingCtlEntry that a h3cNqaReactItemIndex
belongs to. The third index element selects a single reaction.
Indexes
Column Syntax OID
h3cNqaReactOwnerIndex
The first index of h3cNqaReactionTable, it is the same as
pingCtlOwnerIndex in pingCtlTable. h3cNqaReactOwnerIndex and
h3cNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.1
h3cNqaReactTestName
The second index of h3cNqaReactionTable, it is the same as
pingCtlTestName in pingCtlTable. h3cNqaReactOwnerIndex and
h3cNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.2
h3cNqaReactItemIndex
The third index of h3cNqaReactionTable, it definitely
identifies one of the reaction configurations for a test.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.3
h3cNqaReactCheckedElement
A list of reaction condition type.
'probetime' and 'probefailure' are valid when pingCtlType of
the test is not h3cNqajitter.

'jitterOwdSD': one way time from source to destination in
jitte…
Enumerationr/w
Enumerated Values:
1probetime
2probefailure
3jitterrtt
4jitterpacketloss
5jittersd
6jitterds
7icpif
8mos
9jitterOwdSD
10jitterOwdDS
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.4
h3cNqaReactThresholdUpperLimit
This object defines an administrative upper-threshold value for
h3cNqaReactCheckedElement.

The value of this object is zero if h3cNqaReactCheckedElement is
specified as 'jitterpacketloss' and 'probefailur…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.5
h3cNqaReactThresholdLowerLimit
This object defines an administrative lower-threshold value for
h3cNqaReactCheckedElement.

The value of h3cNqaReactThresholdLowerLimit should be equal or less
than the value of h3cNqaReactThresholdUpperLi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.6
h3cNqaReactThresholdType
This object defines the reaction threshold types.

invalid(0): Invalid value.

average(1): If reaction threshold type is average and the average
value of watched opera…
Enumerationr/w
Enumerated Values:
0invalid
1average
2consecutive
3accumulative
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.7
h3cNqaReactThresholdConsecNum
This object defines a consecutive threshold limit.

The value is zero when h3cNqaReactThresholdType
is not 'consecutive'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.8
h3cNqaReactThresholdAccumNum
This object defines an accumulative threshold limit.

The value is zero when the h3cNqaReactThresholdType
is not 'accumulative'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.9
h3cNqaReactActionType
Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:

none - No reaction is generated
trapOnly - A trap is generated
triggerO…
Enumerationr/w
Enumerated Values:
0none
1trapOnly
2triggerOnly
3trapAndTrigger
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.10
h3cNqaReactCurrentStatus
Specifies the current status of this reaction entry:

invalid - The status of the reaction entry is unknown.

overThreshold - The status of the reaction entry is overThreshold
…
Enumeration
Enumerated Values:
1invalid
2overThreshold
3belowThreshold
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.11
h3cNqaReactRowStatus
This object allows entries to be created and deleted
in the h3cNqaReactionTable.

Creation of an entry in this table results in a new set of reaction
configurations which take effect immediately.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.12
h3cNqaReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.13
h3cNqaReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.13.1.14

h3cNqaStatisticsReactionTable

table
.1.3.6.1.4.1.2011.10.8.3.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaStatisticsReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaStatisticsReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
h3cNqaStatisticsReactionEntry row .1.3.6.1.4.1.2011.10.8.3.1.14.1
Defines an entry in the h3cNqaStatisticsReactionTable. The
first two index elements identify the pingCtlEntry that a
h3cNqaReactItemIndex belongs to. The third index element
identifies an entry in the h3cNqaStatisticsRe…
Indexes
Column Syntax OID
h3cNqaStatReactOwnerIndex
The first index of h3cNqaStatisticsReactionTable, it is the same
as pingCtlOwnerIndex in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.1
h3cNqaStatReactTestName
The second index of h3cNqaStatisticsReactionTable, it is the same
as pingCtlTestName in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.2
h3cNqaStatReactIndex
The third index of h3cNqaStatisticsReactionTable. An entry in
this table is created when the statistics result of a NQA probe
is determined.

An implementation MUST start assigning h3cNqaStatResIndex value…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.3
h3cNqaStatReactItemIndex
The forth index of h3cNqaStatisticsReactionTable, it definitely
identifies one of the reaction configurations for a test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.4
h3cNqaStatReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.5
h3cNqaStatReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.8.3.1.14.1.6

h3cNqaTcpServerExtendTable

table
.1.3.6.1.4.1.2011.10.8.3.1.15 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaTcpServerExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaTcpServerExtendTable' 
A table which contains the status of extended NQA TCP server
configuration information.
h3cNqaTcpServerExtendEntry row .1.3.6.1.4.1.2011.10.8.3.1.15.1
A table which contains the status of extended NQA TCP server
configuration information.
This entry includes the TCP server IP address, port,
VPN name and DSField.
Indexes
Column Syntax OID
h3cNqaTcpServerExtIpAddress
TCP server's IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.1
h3cNqaTcpServerExtPort
TCP server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.2
h3cNqaTcpServerExtVPNType
TCP server's VPN instance type.
VpnInstanceType
Type Values:
1public
2vpn
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.3
h3cNqaTcpServerExtVPNInstance
TCP server's VPN name.If the NQA server listens on the public network,
the value of h3cNqaTcpServerExtVPNType must be public(1) and the value
of this object can be set to any non-printable character string.If the
NQA se…
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.4
h3cNqaTcpServerExtDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.5
h3cNqaTcpServerExtRowStatus
h3cNqaTcpServerIpAddress, h3cNqaTcpServerPort, h3cNqaTcpServerExtVPNType
and h3cNqaTcpServerVPNInstance must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.8.3.1.15.1.6

h3cNqaUdpServerExtendTable

table
.1.3.6.1.4.1.2011.10.8.3.1.16 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cNqaUdpServerExtendTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-NQA-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-NQA-MIB::h3cNqaUdpServerExtendTable' 
Status of extended NQA UDP server configuration information.
h3cNqaUdpServerExtendEntry row .1.3.6.1.4.1.2011.10.8.3.1.16.1
A table which contains the status of extended NQA UDP server
configuration information.
This entry includes the UDP server IP address, port,
VPN name and DSField.
Indexes
Column Syntax OID
h3cNqaUdpServerExtIpAddress
UDP server's IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.1
h3cNqaUdpServerExtPort
UDP server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.2
h3cNqaUdpServerExtVPNType
UDP server's VPN instance type.
VpnInstanceType
Type Values:
1public
2vpn
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.3
h3cNqaUdpServerExtVPNInstance
UDP server's VPN name.If the NQA server listens on the public network,
the value of h3cNqaUdpServerExtVPNType must be public(1) and the value
of this object can be set to any non-printable character string.If the
NQA se…
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.4
h3cNqaUdpServerExtDSField
Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.5
h3cNqaUdpServerExtRowStatus
h3cNqaUdpServerIpAddress, h3cNqaUdpServerPort, h3cNqaUdpServerExtVPNType
and h3cNqaUdpServerVPNInstance must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.8.3.1.16.1.6