It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. Probe time(equals to RTT for some type of tests) is not in
the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit for a number of times
specified in h3cNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit for a number of times
specified in h3cNqaReactThresholdConsecNum.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not h3cNqajitter.
h3cNqaJitterRTTOverThreshold
.1.3.6.1.4.1.2011.10.8.3.3.2
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average NQA round-trip-time (RTT) of jitter packets
is not in the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit.
2. The RTT of jitter packets is accumulatively not in the range
h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit for a number of times specified
in h3cNqaReactThresholdAccumNum in one test.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is h3cNqajitter.
h3cNqaProbeFailure
.1.3.6.1.4.1.2011.10.8.3.3.3
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the probe test accumulatively failed for a
number of times specified in h3cNqaReactThresholdAccumNum in one
test while the value of h3cNqaReactThresholdType is 'accumulative'.
2. When the probe test consecutively failed for
a number of times specified in h3cNqaReactThresholdConsecNum in one
test while the value of h3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not h3cNqajitter.
h3cNqaJitterPacketLoss
.1.3.6.1.4.1.2011.10.8.3.3.4
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the jitter packets accumulatively lost for a
number of times specified in h3cNqaReactThresholdAccumNum in one
test while the value of h3cNqaReactThresholdType is 'accumulative'.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is h3cNqajitter.
h3cNqaJitterSDOverThreshold
.1.3.6.1.4.1.2011.10.8.3.3.5
The SD means the jitter values from source to destination.
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit and the
h3cNqaReactThresholdType is specified as 'average' type.
2. The average of SD in one jitter test is accumulatively
not in the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit for a number of times specified
in h3cNqaReactThresholdAccumNum and the
h3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is h3cNqajitter.
h3cNqaJitterDSOverThreshold
.1.3.6.1.4.1.2011.10.8.3.3.6
The DS means the jitter values from destination to source.
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit and the
h3cNqaReactThresholdType is specified as 'average' type.
2. The average of DS in one jitter test is accumulatively not
in the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit for a number of times specified
in h3cNqaReactThresholdAccumNum and the
h3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is h3cNqajitter.
h3cNqaICPIFOverThreshold
.1.3.6.1.4.1.2011.10.8.3.3.7
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the ICPIF value in one jitter test is not in
the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'.
h3cNqaMOSOverThreshold
.1.3.6.1.4.1.2011.10.8.3.3.8
It is generated when the value of h3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the MOS value in one jitter test is not in
the range h3cNqaReactThresholdLowerLimit through
h3cNqaReactThresholdUpperLimit.
This notification is valid only when h3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is h3cNqajitter and h3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'.