H3C-MPM-MIB Table View

A table which is used for configuring a port in a specified VLAN to join
a multicast group.

h3cMPortGroupJoinEntry row .1.3.6.1.4.1.2011.10.2.51.2.1.1

An entry which is used for configuring a port in a specified VLAN to join
a multicast group.

Indexes

IF-MIBifIndex h3cMPortGroupJoinVlanID h3cMPortGroupJoinAddressType h3cMPortGroupJoinAddress

Column	Syntax	OID
h3cMPortGroupJoinVlanID An index uniquely identifying a port in a specified VLAN which joined the multicast group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.51.2.1.1.1
h3cMPortGroupJoinAddressType Type of the multicast IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.10.2.51.2.1.1.2
h3cMPortGroupJoinAddress IP address of the group which the port belongs to, and it must be a valid multicast IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.51.2.1.1.3
h3cMPortGroupJoinStatus This object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo', 'destroy'. Until instances of all corresponding columns are appropriately con…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.51.2.1.1.4

A table containing information about the status of a port
which joined a multicast group in the VLAN.

h3cMPortGroupEntry row .1.3.6.1.4.1.2011.10.2.51.2.2.1

An entry containing information about the status of a port
which joined a multicast group in the VLAN.

Indexes

IF-MIBifIndex h3cMPortGroupVlanID h3cMPortGroupAddressType h3cMPortGroupAddress

Column	Syntax	OID
h3cMPortGroupVlanID An index uniquely identifies that a port belongs to a specified VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.51.2.2.1.1
h3cMPortGroupAddressType Type of multicast IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.10.2.51.2.2.1.2
h3cMPortGroupAddress IP address of the group which the port joined, and it must be a valid multicast IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.51.2.2.1.3

A table configuring the fast leave status, group limit number and
group policy parameter on a port in the specified VLAN.

h3cMPortConfigEntry row .1.3.6.1.4.1.2011.10.2.51.2.3.1

An entry containing information about the fast leave status, group
limit number and group policy parameter of a port in the specified
VLAN.

Indexes

IF-MIBifIndex h3cMPortConfigVlanID

Column	Syntax	OID
h3cMPortConfigVlanID The VLAN index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.51.2.3.1.1
h3cMPortGroupLimitNumber The group limit number of the port.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.51.2.3.1.2
h3cMPortFastLeaveStatus The fast leave status of the port.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.10.2.51.2.3.1.3
h3cMPortGroupPolicyParameter The ACL number which is used as the group policy parameter of the port.	Integer32r/w Constraints: range: 0-0 range: 2000-2999	.1.3.6.1.4.1.2011.10.2.51.2.3.1.4
h3cMPortConfigRowStatus The object is responsible for managing the creation and deletion of rows, which supports 'active', 'notReady', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.51.2.3.1.5
h3cMPortGroupLimitReplace This object is related to the object h3cMPortGroupLimitNumber. If the current IGMP group number is less than the value of h3cMPortGroupLimitNumber, any new IGMP group is permitted. If the current IGMP group number equal…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.10.2.51.2.3.1.6

A table used to configure a host on a port in a specified VLAN
statically to join a multicast group.

h3cHostStaticJoinEntry row .1.3.6.1.4.1.2011.10.2.51.2.4.1

An entry used to configure a host on a port in a specified VLAN
statically to join a multicast group.

Indexes

IF-MIBifIndex h3cHostStaticJoinVlanID h3cHostStaticJoinAddressType h3cHostStaticJoinAddress

Column	Syntax	OID
h3cHostStaticJoinVlanID An index uniquely identify the specified VLAN in which a host on a port statically joined the multicast group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.51.2.4.1.1
h3cHostStaticJoinAddressType Type of the multicast IP address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2011.10.2.51.2.4.1.2
h3cHostStaticJoinAddress IP address of the group which the host belongs to, and it must be a valid multicast IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.10.2.51.2.4.1.3
h3cHostStaticJoinStatus This object is responsible for managing rows, which supports 'active', 'createAndGo' and 'destroy'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.51.2.4.1.4