H3C-MPLSOAM-PS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
14
h3cMplsPsTable
table
.1.3.6.1.4.1.2011.10.2.80.2.1
·
1 row entry
·
14 columns
Uses the h3c variant from
Command help
/opt/observium/mibs/h3c.
Walk h3cMplsPsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-MPLSOAM-PS-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-MPLSOAM-PS-MIB::h3cMplsPsTable'
This table specifies per-protection-group MPLS PS capability and associated information.
An entry in this table is created by an LSR for every
protection group capable of supporting mpls ps.
protection group capable of supporting mpls ps.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is a unique index for an entry in the mplspsEntry.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.1 |
||||||||||||
|
This is a unique group id for an entry in the mplspsEntry.
One protect-switch group is composed of one working static-lsp and one protection static-lsp. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.2 |
||||||||||||
|
The name of the working static-lsp.
|
OctetStringr/w | .1.3.6.1.4.1.2011.10.2.80.2.1.1.3 |
||||||||||||
|
The name of the protection static-lsp.
|
OctetStringr/w | .1.3.6.1.4.1.2011.10.2.80.2.1.1.4 |
||||||||||||
|
Revertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the working LSP is repaired. And switching does not occur in a non-revertive mode. 1: revertive; 2: no… |
Integer32r/w Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.5 |
||||||||||||
|
Wait to Restore timer is only applicable for the revertive mode
and applies to a working LSP, it prevents reversion back to select the working LSP until the Wait to Restore timer has expired. The default value is 12 min… |
30sSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.6 |
||||||||||||
|
The time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm. Step is 100ms, maximum is 10s. |
100msSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.7 |
||||||||||||
|
The current switch condition of the protection group.
1: clear, this command clears all of the externally initiated switch commands listed below; 2: lockout of protection, fix the selector position on the working LSP, P… |
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.8 |
||||||||||||
|
The state of working static-lsp state in one protection group,
whether it is in defect: 1: it is out of defect; 2: it enters defect. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.9 |
||||||||||||
|
The state of working static-lsp state in one protection group,
whether it is up or down: 1: it is in up state; 2: it is in down state. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.10 |
||||||||||||
|
The state of protection static-lsp state in one protection group,
whether it is in detection: 1: it is out of defect; 2: it enters defect. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.11 |
||||||||||||
|
The state of protection static-lsp state in one protection group,
whether it is up or down: 1: it is in up state; 2: it is in down state. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.12 |
||||||||||||
|
Which tunnel is used to transfer the data stream.
1: working static-lsp; 2: protection static-lsp. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.13 |
||||||||||||
|
This object is responsible for managing the creation,
deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, h3cMplsPsGroupID, h3cMplsPsWorkLspName, h3cMpl… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.2011.10.2.80.2.1.1.14 |
