H3C-IF-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
109

h3cIfFlowStatTable

table
.1.3.6.1.4.1.2011.10.2.40.2.1.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfFlowStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfFlowStatTable' 
This table contains objects to get statistic information
of interfaces on a device.
h3cIfStatEntry row .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1
Entry items
Indexes
Column Syntax OID
h3cIfStatFlowInterval
Sampling interval for in/out flow of interface.
Setting zero indicates closing this statistic function
and objects in this table should return 0.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.1
h3cIfStatFlowInBits
In bits in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.2
h3cIfStatFlowOutBits
Out bits in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.3
h3cIfStatFlowInPkts
In packets in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.4
h3cIfStatFlowOutPkts
Out packets in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.5
h3cIfStatFlowInBytes
In bytes in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.6
h3cIfStatFlowOutBytes
Out bytes in the specified interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.1.1.7

h3cIfSpeedStatTable

table
.1.3.6.1.4.1.2011.10.2.40.2.1.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfSpeedStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfSpeedStatTable' 
This table contains objects to get average speed information
in the specified interval for interfaces on a device.
h3cIfSpeedStatEntry row .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1
Entry items
Indexes
Column Syntax OID
h3cIfSpeedStatInterval
Sampling interval for in/out flow of interface.
Setting zero indicates closing this statistic function
and objects in this table should return 0.
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.1
h3cIfSpeedStatInPkts
Average of input packets per second in the specified interval by
h3cIfSpeedStatInterval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.2
h3cIfSpeedStatOutPkts
Average of output packets per second in the specified interval by
h3cIfSpeedStatInterval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.3
h3cIfSpeedStatInBytes
Average of input bytes per second in the specified interval by
h3cIfSpeedStatInterval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.4
h3cIfSpeedStatOutBytes
Average of output bytes per second in the specified interval by
h3cIfSpeedStatInterval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.1.2.2.1.5

h3cIfHCFlowStatTable

table
.1.3.6.1.4.1.2011.10.2.40.2.1.2.3 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfHCFlowStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfHCFlowStatTable' 
This table contains objects to get statistic information
of interfaces on a device.
h3cIfHCFlowStatEntry row .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1
Entry items
Indexes
Column Syntax OID
h3cIfStatFlowHCInBits
In bits in the specified interval. This object is a 64-bit
version of h3cIfStatFlowInBits.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.1
h3cIfStatFlowHCOutBits
Out bits in the specified interval. This object is a 64-bit
version of h3cIfStatFlowOutBits.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.2
h3cIfStatFlowHCInPkts
In packets in the specified interval. This object is a 64-bit
version of h3cIfStatFlowInPkts.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.3
h3cIfStatFlowHCOutPkts
Out packets in the specified interval. This object is a 64-bit
version of h3cIfStatFlowOutPkts.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.4
h3cIfStatFlowHCInBytes
In bytes in the specified interval. This object is a 64-bit
version of h3cIfStatFlowInBytes.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.5
h3cIfStatFlowHCOutBytes
Out bytes in the specified interval. This object is a 64-bit
version of h3cIfStatFlowOutBytes.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.3.1.6

h3cIfHCSpeedStatTable

table
.1.3.6.1.4.1.2011.10.2.40.2.1.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfHCSpeedStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfHCSpeedStatTable' 
This table contains objects to get average speed information
in the specified interval for interfaces on a device.
          
This table is a 64-bit version of h3cIfSpeedStatTable.
h3cIfHCSpeedStatEntry row .1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1
Entry items
Indexes
Column Syntax OID
h3cIfSpeedStatHCInPkts
Average of input packets per second in the specified interval by
h3cIfSpeedStatInterval.

This object is a 64-bit version of h3cIfSpeedStatInPkts.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.1
h3cIfSpeedStatHCOutPkts
Average of output packets per second in the specified interval by
h3cIfSpeedStatInterval.

This object is a 64-bit version of h3cIfSpeedStatOutPkts.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.2
h3cIfSpeedStatHCInBytes
Average of input bytes per second in the specified interval by
h3cIfSpeedStatInterval.

This object is a 64-bit version of h3cIfSpeedStatInBytes.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.3
h3cIfSpeedStatHCOutBytes
Average of output bytes per second in the specified interval by
h3cIfSpeedStatInterval.

This object is a 64-bit version of h3cIfSpeedStatOutBytes.
HCNUM-TCCounterBasedGauge64 .1.3.6.1.4.1.2011.10.2.40.2.1.2.4.1.4

h3cRTParentIfTable

table
.1.3.6.1.4.1.2011.10.2.40.2.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cRTParentIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cRTParentIfTable' 
This table contains all interfaces that can create subinterfaces.
h3cRTParentIfEntry row .1.3.6.1.4.1.2011.10.2.40.2.2.1.1
This entry describes an interface that can create subinterfaces.
Indexes
Column Syntax OID
h3cRTParentIfIndex
The index of the interface that can create subinterfaces. The value
is the same as the ifIndex value for this interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.1
h3cRTMinSubIfOrdinal
The min ordinal of the subinterface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.2
h3cRTMaxSubIfOrdinal
The max ordinal of the subinterface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.1.1.3

h3cRTSubIfTable

table
.1.3.6.1.4.1.2011.10.2.40.2.2.2 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cRTSubIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cRTSubIfTable' 
This table contains objects to create or delete subinterfaces.
To create a subinterface, a valid parent interface must be
specified by h3cRTSubIfParentIfIndex, and h3cRTSubIfOrdinal
must be in the range between h3cRTMinSubIfOrdinal and
h3cRTMaxSubIfOrdinal of the parent interface from
h3cRTParentIfTable.
          
Subinterfaces are logical virtual interfaces configured on a
main interface.  The main interface can be either a physical
interface (such as a Layer 3 Ethernet interface) or a logical
interface (such as an MFR interface).  The subinterfaces on a
main interface share the physical layer parameters of the main
interface but can have link layer and network layer parameters
of their own.  Disabling or enabling a subinterface doesn't
affect the main interface, but the main interface status change
affects the subinterfaces.  The subinterfaces can't operate
correctly unless the main interface is connected.
Creating multiple subinterfaces on a single interface
enables you to plan network in a more flexible way.
          
You can create subinterfaces for the following physical
interfaces:
Ethernet interface.  An Ethernet subinterface associated with no
VLAN supports only IPX, while an Ethernet subinterface associated
with a VLAN supports both IP and IPX.
WAN interfaces with their data link layer protocols being frame
relay, whose subinterfaces support IP and IPX.
WAN interfaces with their data link layer protocols being X.25,
whose subinterfaces support IP and IPX.
ATM interface, whose subinterfaces support only IP.
h3cRTSubIfEntry row .1.3.6.1.4.1.2011.10.2.40.2.2.2.1
The h3cRTSubIfTable entry items
Indexes
Column Syntax OID
h3cRTSubIfParentIfIndex
The parent interface index. The value should be the same as
h3cRTParentIfIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.1
h3cRTSubIfOrdinal
The ordinal of the subinterface. It should between
h3cRTMinSubIfOrdinal and h3cRTMaxSubIfOrdinal of the parent
interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.2
h3cRTSubIfSubIfIndex
The ifIndex value of the subinterface
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.3
h3cRTSubIfSubIfDesc
The name of the interface
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.4
h3cRTSubIfRowStatus
Operation status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.2.40.2.2.2.1.5

h3cIfLinkModeTable

table
.1.3.6.1.4.1.2011.10.2.40.2.2.3 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfLinkModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfLinkModeTable' 
This table contains objects to get or set the link mode of an
interface.
According to the layer at which the device processes received
data packets, Ethernet interfaces can operate in bridge or route
mode.
h3cIfLinkModeEntry row .1.3.6.1.4.1.2011.10.2.40.2.2.3.1
The interface link mode table entry
Indexes
Column Syntax OID
h3cIfLinkModeIndex
The value is the same as ifIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.1
h3cIfLinkMode
The current link mode of the interface.
If h3cIfLinkModeSwitchSupport is true, writing to the object can
change the link mode of the interface.
Enumerationr/w
Enumerated Values:
1bridgeMode
2routeMode
 .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.2
h3cIfLinkModeSwitchSupport
Whether the interface supports link mode switching.
If this object is true, the interface can operate in either
bridge mode or route mode. Otherwise the interfaces can operate
only in bridge or route mode.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.2.2.3.1.3

h3cIfPortTypeTable

table
.1.3.6.1.4.1.2011.10.2.40.2.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfPortTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfPortTypeTable' 
This table contains objects to get or set the port type
of an interface.
h3cIfPortTypeEntry row .1.3.6.1.4.1.2011.10.2.40.2.2.4.1
The interface port type table entry.
Indexes
Column Syntax OID
h3cIfPortTypeIndex
The value is the same as ifIndex.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2011.10.2.40.2.2.4.1.1
h3cIfPortType
The current port type of the interface.
Don't set the port type to other for an interface.
Enumerationr/w
Enumerated Values:
1other
2ethernet
3fc
 .1.3.6.1.4.1.2011.10.2.40.2.2.4.1.2

h3cIfPfcDot1pTable

table
.1.3.6.1.4.1.2011.10.2.40.2.2.5 · 1 row entry · 5 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfPfcDot1pTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfPfcDot1pTable' 
This table can set the inbound and outbound rate thresholds for the specified dot1p values.
h3cIfPfcDot1pEntry row .1.3.6.1.4.1.2011.10.2.40.2.2.5.1
Entry items
Indexes
Column Syntax OID
h3cIfPfcDot1pValue
The PFC dot1p value list.
Enumeration
Enumerated Values:
1pri0
2pri1
3pri2
4pri3
5pri4
6pri5
7pri6
8pri7
 .1.3.6.1.4.1.2011.10.2.40.2.2.5.1.1
h3cIfPfcDot1pInPps
The current PFC dot1p for the inbound rate.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.2.5.1.2
h3cIfPfcDot1pOutPps
The current PFC dot1p for the outbound rate.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.2.5.1.3
h3cIfPfcDot1pInPpsThreshold
The threshold for the inbound rate.
If the h3cIfPfcDot1pInPpsThreshold is set to 0, no h3cIfPfcInRising will be generated.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.2.5.1.4
h3cIfPfcDot1pOutPpsThreshold
The threshold for the outbound rate.
If the h3cIfPfcDot1pOutPpsThreshold is set to 0, no h3cIfPfcOutRising will be generated.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.2.5.1.5

h3cIfTable

table
.1.3.6.1.4.1.2011.10.2.40.2.3.2 · 1 row entry · 14 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfTable' 
A list of interface entries.  The number of entries is given by
the value of IfNumber.
h3cIfEntry row .1.3.6.1.4.1.2011.10.2.40.2.3.2.1
An entry containing management information applicable to a
particular interface.
Indexes
Column Syntax OID
h3cIfUpDownTimes
The interface's up/down times, since the device was initialized.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.1
h3cIfMtu
The size of the largest datagram that can be sent or received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagram, this is the size of the largest network
datagram that…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.2
h3cIfBandwidthRate
The rate of the bandwidth for an interface.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.3
h3cIfDiscardPktRate
The rate of the discarded packets for an interface.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.4
h3cIfStatusKeepTime
The time since the interface
entered its current operational state.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.5
h3cIfInNUcastPkts
The number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.6
h3cIfOutNUcastPkts
The total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.7
h3cIfIsPoe
Whether the interface supports PoE.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.8
h3cIfOperStatus
Current status of the interface. In testing state,
no operational packets can be forwarded. If ifAdminStatus
is down, h3cIfOperStatus should be admindown. If
ifAdminStatus is changed to up, h3cIfOperStatus should
cha…
Enumeration
Enumerated Values:
1up
2down
3testing
4admindown
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.9
h3cIfDownTimes
Number of times the interface went down, since the device was initialized.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.10
h3cIfPfcStatus
Pfc (Priority-based Flow Control) status.
Forcibly enable Pfc by enable(1).
Disable Pfc by disable(2).
Set Pfc to auto mode by auto(3).
In auto mode, the local end automatically negotiates
the Pfc status wit…
Enumerationr/w
Enumerated Values:
1enable
2disable
3auto
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.11
h3cIfPfcDot1pNoDrop
Pfc (Priority-based Flow Control) dot1q list,
bit 0 through bit 7 corresponding to priority 0 through priority 7.
See h3cIfPfcStatus.
Bitsr/w
Enumerated Values:
0pri0
1pri1
2pri2
3pri3
4pri4
5pri5
6pri6
7pri7
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.12
h3cIfDescription
This object is also an 'alias' name for the interface specified by a
network manager, like the object of ifAlias. However, the size of
this object is larger than ifAlias. When this object is set to a
string of more th…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.13
h3cIfFwdErrDiscards
The number of packets that were discarded when being forwarded.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.2.3.2.1.14

h3cIfUsingTable

table
.1.3.6.1.4.1.2011.10.2.40.2.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfUsingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfUsingTable' 
A table containing management information applicable to splitting
interfaces.  To improve port density, reduce costs, and improve network
flexibility, a high-bandwidth interface can be split into multiple
low-bandwidth breakout interfaces, and the breakout interfaces can be
combined into a higher-bandwidth interface.
For example, a 40-GE interface can be split into four 10-GE breakout
interfaces.  After the operation takes effect on a 40-GE interface, the
system deletes the 40-GE interface and creates four 10-GE breakout
interfaces.
h3cIfUsingEntry row .1.3.6.1.4.1.2011.10.2.40.2.3.3.1
An entry of h3cIfUsingTable.
Indexes
Column Syntax OID
h3cIfUsingIndex
Index of an interface that can be split into multiple low-bandwidth
breakout interfaces or be restored to a high-bandwidth interface.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.3.3.1.1
h3cIfUsingSupportType
This object specifies the port type which can be split into or restored to.
From lowest bit, each bit corresponds to a port type ('10GE', '20GE',
'40GE', '100GE', '25GE', '50GE').
For example, value 3 means this object …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.10.2.40.2.3.3.1.2
h3cIfUsingType
This object specifies the port type that can be split into or restored to.

After this object is set to a non-zero value, the operation returns
success in the following cases:
1. The original instance sti…
Enumerationr/w
Enumerated Values:
0noUsing
1using10GE
2using20GE
3using40GE
4using100GE
5using25GE
6using50GE
 .1.3.6.1.4.1.2011.10.2.40.2.3.3.1.3
h3cIfUsingStatus
After object h3cIfUsingType is set to a non-zero value, the value
for this object is needReboot(1) until you reboot the line card (for
distributed devices) or device (for centralized devices) where the
port is located.
Enumeration
Enumerated Values:
0noUsing
1needReboot
 .1.3.6.1.4.1.2011.10.2.40.2.3.3.1.4

h3cIfExtTrapCfgTable

table
.1.3.6.1.4.1.2011.10.2.40.3.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfExtTrapCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfExtTrapCfgTable' 
The trap configuration table.
h3cIfExtTrapCfgEntry row .1.3.6.1.4.1.2011.10.2.40.3.1.1.1
An entry for this table.
Indexes
Column Syntax OID
h3cIfBandwidthUpperLimit
The rate of the bandwidth upper limit for an interface.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.10.2.40.3.1.1.1.1
h3cIfDiscardPktRateUpperLimit
The rate of the discarded packets upper limit for an interface.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.2011.10.2.40.3.1.1.1.2

h3cIfMonStatTable

table
.1.3.6.1.4.1.2011.10.2.40.5.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfMonStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfMonStatTable' 
This table is about some types of statistics.
h3cIfMonStatEntry row .1.3.6.1.4.1.2011.10.2.40.5.1.1.1
Entry items.
Indexes
Column Syntax OID
h3cIfMonInputRateStatistics
Statistics about the inbound bandwidth.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.1
h3cIfMonOutputRateStatistics
Statistics about the outbound bandwidth.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.2
h3cIfMonInputErrorAlarmStatistics
Statistics about the number of inbound error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.3
h3cIfMonOutputErrorAlarmStatistics
Statistics about the number of outbound error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.4
h3cIfMonSdhErrorStatistics
Statistics about the number of SDH error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.5
h3cIfMonSdhB1ErrorStatistics
Statistics about the number of SDH B1 error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.6
h3cIfMonSdhB2ErrorStatistics
Statistics about the number of SDH B2 error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.7
h3cIfMonCRCErrorStatistics
Statistics about the number of CRC error packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.8
h3cIfMonPauseFrameStatistics
Statistics about the number of pause frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.9
h3cIfMonTxPauseFrameStatistics
Statistics about the number of Tx-pause frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.40.5.1.1.1.10

h3cIfMonThresholdTable

table
.1.3.6.1.4.1.2011.10.2.40.5.2.1 · 1 row entry · 29 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfMonThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfMonThresholdTable' 
This table is about the upper threshold,low-er threshold, and inspection interval.
h3cIfMonThresholdEntry row .1.3.6.1.4.1.2011.10.2.40.5.2.1.1
Entry items.
Indexes
Column Syntax OID
h3cIfMonInputRateLowThres
Low threshold for the inbound bandwidth.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.1
h3cIfMonInputRateHighThres
Upper threshold for the inbound bandwidth.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.2
h3cIfMonOutputRateLowThres
Lower threshold for the outbound bandwidth.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.3
h3cIfMonOutputRateHighThres
Upper threshold for the outbound bandwidth.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.4
h3cIfMonInputErrorAlarmLowThres
Lower threshold for the number of inbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.5
h3cIfMonInputErrorAlarmHighThres
Upper threshold for the number of inbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.6
h3cIfMonInputErrorAlarmInterval
Inspection interval for the number of inbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.7
h3cIfMonOutputErrorAlarmLowThres
Lower threshold for the number of outbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.8
h3cIfMonOutputErrorAlarmHighThres
Upper threshold for the number of outbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.9
h3cIfMonOutputErrorAlarmInterval
Inspection interval for the number of outbound error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.10
h3cIfMonSdhErrorLowThres
Lower threshold for the number of SDH error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.11
h3cIfMonSdhErrorHighThres
Upper threshold for the number of SDH error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.12
h3cIfMonSdhErrorInterval
Inspection interval for the number of SDH error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.13
h3cIfMonSdhB1ErrorLowThres
Lower threshold for the number of SDH B1 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.14
h3cIfMonSdhB1ErrorHighThres
Upper threshold for the number of SDH B1 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.15
h3cIfMonSdhB1ErrorInterval
Inspection interval for the number of SDH B1 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.16
h3cIfMonSdhB2ErrorLowThres
Lower threshold for the number of SDH B2 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.17
h3cIfMonSdhB2ErrorHighThres
Upper threshold for the number of SDH B2 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.18
h3cIfMonSdhB2ErrorInterval
Inspection interval for the number of SDH B2 error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.19
h3cIfMonCRCErrorLowThres
Lower threshold for the number of CRC error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.20
h3cIfMonCRCErrorHighThres
Upper threshold for the number of CRC error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.21
h3cIfMonCRCErrorInterval
Inspection interval for the number of CRC error packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.22
h3cIfMonCRCErrType
Inspection type for the CRC error packets.
Enumerationr/w
Enumerated Values:
1absolute
2ratio
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.23
h3cIfMonPauseFrameLowThres
Lower threshold for the number of inbound pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.24
h3cIfMonPauseFrameHighThres
Upper threshold for the number of inbound pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.25
h3cIfMonPauseFrameInterval
Inspection interval for the number of inbound pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.26
h3cIfMonTxPauseFrameLowThres
Lower threshold for the number of inbound Tx-pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.27
h3cIfMonTxPauseFrameHighThres
Upper threshold for the number of inbound Tx-pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.28
h3cIfMonTxPauseFrameInterval
Inspection interval for the number of inbound Tx-pause frames.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.40.5.2.1.1.29

h3cIfMonAlarmDownEnableTable

table
.1.3.6.1.4.1.2011.10.2.40.5.2.2 · 1 row entry · 10 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cIfMonAlarmDownEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-IF-EXT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-IF-EXT-MIB::h3cIfMonAlarmDownEnableTable' 
This table can set or get whether to enable the interface down function.
h3cIfMonAlarmDownEnableEntry row .1.3.6.1.4.1.2011.10.2.40.5.2.2.1
Entry items
Indexes
Column Syntax OID
h3cIfMonInputRateEnableDown
When the inbound bandwidth exceeds the upper threshold,the physical
interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.1
h3cIfMonOutputRateEnableDown
When the outbound bandwidth exceeds the upper threshold,the physical
interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.2
h3cIfMonInputErrorAlarmEnableDown
When the number of inbound error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.3
h3cIfMonOutputErrorAlarmEnableDown
When the number of outbound error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.4
h3cIfMonSdhErrorEnableDown
When the number of SDH error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.5
h3cIfMonSdhB1ErrorEnableDown
When the number of SDH B1 error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.6
h3cIfMonSdhB2ErrorEnableDown
When the number of SDH B2 error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.7
h3cIfMonCRCErrorEnableDown
When the number of CRC error packets-exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.8
h3cIfMonPauseFrameEnableDown
When the number of inbound pause frames exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.9
h3cIfMonTxPauseFrameEnableDown
When the number of inbound Tx-pause frames exceeds the upper threshold,
the physical interface goes down.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.10.2.40.5.2.2.1.10