H3C-EPON-MIB Table View

This table defines system related parameters.

h3cEponSysManEntry row .1.3.6.1.4.1.2011.10.2.42.1.1.16.1

The entry of the table h3cEponSysManTable.

Indexes

h3cEponSlotIndex

Column	Syntax	OID
h3cEponSlotIndex Slot Index, the index of h3cEponSysManTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.1
h3cEponModeSwitch cmode - epon standard mode. hmode - private mode.	Enumerationr/w Enumerated Values: 1 cmode 2 hmode	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.2
h3cEponAutomaticMode Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable aut…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.3
h3cEponOamDiscoveryTimeout Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.4
h3cEponEncryptionNoReplyTimeOut Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.5
h3cEponEncryptionUpdateTime Encryption key update timer for all ONUs on slot, indicated by h3cEponSlotIndex, ranging from 1 to 255, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.6
h3cEponAutoBindStatus enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.7
h3cEponAutoBindType Set auto binding type, which can be combined. If auto binding is disabled, 0 is returned.	Bitsr/w Enumerated Values: 0 mac 1 loid 2 loidPassword	.1.3.6.1.4.1.2011.10.2.42.1.1.16.1.8

EPON auto update ONU application configuration.

h3cEponAutoUpdateEntry row .1.3.6.1.4.1.2011.10.2.42.1.1.17.1

The entry of the table h3cEponAutoUpdateTable.

Indexes

h3cEponSlotIndex

Column	Syntax	OID
h3cEponAutoUpdateFileName The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.1.17.1.1
h3cEponAutoUpdateSchedStatus The status of schedule update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.1.17.1.2
h3cEponAutoUpdateSchedTime The schedule update timing configuration is related to the h3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.1.17.1.3
h3cEponAutoUpdateSchedType The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.	Enumerationr/w Enumerated Values: 1 daily 2 weekly 3 comingdate	.1.3.6.1.4.1.2011.10.2.42.1.1.17.1.4
h3cEponAutoUpdateRealTimeStatus The status of real time update configuration. The h3cEponAutoUpdateFileName must be set before enable h3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.1.17.1.5

Next OUI index table.

h3cEponOuiIndexNextEntry row .1.3.6.1.4.1.2011.10.2.42.1.1.18.1

The entry of the table h3cEponOuiIndexNextTable.

Indexes

h3cEponSlotIndex

Column	Syntax	OID
h3cEponOuiIndexNext This object contains an appropriate value to be used for h3cEponOuiIndex when creating rows in the h3cEponOuiTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.18.1.1

List of OUI and OAM supported by OLT.

h3cEponOuiEntry row .1.3.6.1.4.1.2011.10.2.42.1.1.19.1

The entry of the table h3cEponOuiTable.

Indexes

h3cEponSlotIndex h3cEponOuiIndex

Column	Syntax	OID
h3cEponOuiIndex The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.19.1.1
h3cEponOuiValue OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.10.2.42.1.1.19.1.2
h3cEponOamVersion Version of OAM protocol defined by the organization denoted by OUI.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.1.19.1.3
h3cEponOuiRowStatus The status of this table entry. Only active, createAndGo and the destory are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.42.1.1.19.1.4

Multicast control global configuration.

h3cEponMulticastControlEntry row .1.3.6.1.4.1.2011.10.2.42.1.1.20.1

The entry of the table h3cEponMulticastControlTable.

Indexes

h3cEponMulticastVlanId

Column	Syntax	OID
h3cEponMulticastVlanId The index of this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.1.20.1.1
h3cEponMulticastAddressList The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.1.20.1.2
h3cEponMulticastStatus The status of this table entry. Only active, createAndGo and the destory are supported.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.42.1.1.20.1.3

This table defines several OLT system parameters:
(1)laser on time
(2)laser off time
(3)whether multiple copy broadcast
(4)whether discard packet
(5)self test
(6)self test result

h3cOltSysManEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.1.1

The entry of the table h3cOltSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOltLaserOnTime The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.1
h3cOltLaserOffTime The laser off time of the ONUs during the discovery process, measured in TQ.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.2
h3cOltMultiCopyBrdCast true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP cont…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.3
h3cOltEnableDiscardPacket Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.4
h3cOltSelfTest selftest(1): Test OLT to check whether it's OK.	Enumerationr/w Enumerated Values: 1 selftest	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.5
h3cOltSelfTestResult The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.	Enumeration Enumerated Values: 1 other 2 ok 3 fail	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.6
h3cOltMaxRtt Set the max Round Trip Time of this OLT.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.7
h3cOltAuthMode Set the auth mode of this OLT, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.	Bitsr/w Enumerated Values: 0 mac 1 loid 2 loidPassword	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.8
h3cOltOnuBindOneToOne Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.1.1.9

Primary status of the specified OLT.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified OLT
(h3cOltFirmMajorVersion, h3cOltFirmMinorVersion,
h3cOltHardMajorVersion, h3cOltHardMinorVersion)
(2)Several physical capabilities of an OLT device.
(h3cOltAgcLockTime, h3cOltAgcCdrTime)
(3)The operation(activation) status of an OLT.
(h3cOltMacAddress, h3cOltWorkMode)

h3cOltInfoEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.2.1

The entry of the table h3cOltInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOltFirmMajorVersion OLT firmware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.1
h3cOltFirmMinorVersion OLT firmware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.2
h3cOltHardMajorVersion OLT hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.3
h3cOltHardMinorVersion OLT hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.4
h3cOltAgcLockTime PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.5
h3cOltAgcCdrTime PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.6
h3cOltMacAddress OLT MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.7
h3cOltWorkMode The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.	Enumeration Enumerated Values: 1 other 2 open 3 reset 4 closed	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.8
h3cOltOpticalPowerTx The optical power transmitted by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.9
h3cOltOpticalPowerRx The burst optical power received by this OLT. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.2.1.10

This table defines the primary parameters of the
Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT.

h3cOltDbaManEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.3.1

The entry of the table h3cOltDbaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOltDbaEnabledType Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorith…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.1
h3cOltDbaDiscoveryLength Discovery length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.2
h3cOltDbaDiscovryFrequency How often should the OLT send discovery frames to the ONUs, measured in grant cycles.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.3
h3cOltDbaCycleLength The grant cycle length in TQ units.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.4
h3cOltDbaVersion DBA version of the OLT.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.5
h3cOltDbaUpdate Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module h3cEponDbaUpdateFileName.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.6
h3cOltDbaUpdateResult The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist…	Enumeration Enumerated Values: 1 other 2 ok 3 fail 4 fileNotExist 5 notSetFilename	.1.3.6.1.4.1.2011.10.2.42.1.3.3.1.7

The table defines the alarm threshold of OLT.

h3cOltPortAlarmThresholdEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.4.1

The entry of the table h3cOltPortAlarmThresholdTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOltPortAlarmBerEnabled Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.1
h3cOltPortAlarmBerDirect Traffic direction to monitor for BER alarm.	Enumerationr/w Enumerated Values: 1 berUplink 2 berDownlink 3 berAll	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.2
h3cOltPortAlarmBerThreshold BER threshold exceed which the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.3
h3cOltPortAlarmFerEnabled Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.4
h3cOltPortAlarmFerDirect Traffic direction to monitor for FER alarm.	Enumerationr/w Enumerated Values: 1 ferUplink 2 ferDownlink 3 ferAll	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.5
h3cOltPortAlarmFerThreshold Frame error rate exceed threshold then the alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.6
h3cOltPortAlarmLlidMismatchEnabled Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.7
h3cOltPortAlarmLlidMismatchThreshold The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.8
h3cOltPortAlarmRemoteStableEnabled Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.9
h3cOltPortAlarmLocalStableEnabled Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.10
h3cOltPortAlarmRegistrationEnabled Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.11
h3cOltPortAlarmOamDisconnectionEnabled Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.12
h3cOltPortAlarmEncryptionKeyEnabled Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.13
h3cOltPortAlarmVendorSpecificEnabled Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.14
h3cOltPortAlarmRegExcessEnabled Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.15
h3cOltPortAlarmDFEEnabled Behavior of device fatal error alarm. true - alarm enable. false - alarm disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.4.1.16

This table is used for getting silent ONU information of OLT.

h3cOnuSilentEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.21.1

The entry of the table h3cOnuSilentTable.

Indexes

IF-MIBifIndex h3cOnuSilentMacAddr

Column	Syntax	OID
h3cOnuSilentMacAddr The MAC address of silent ONUs in OLT.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.3.21.1.1
h3cOnuSilentTime The aging time of a silent ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.21.1.2

The table containing configurations to manage ONU interface(s)
based on OLT interface.

h3cOltUsingOnuEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.22.1

The entry of the table h3cOltUsingOnuTable.

Indexes

IF-MIBifIndex h3cOltUsingOnuNum

Column	Syntax	OID
h3cOltUsingOnuNum The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.10.2.42.1.3.22.1.1
h3cOltUsingOnuIfIndex The ifIndex of the ONU interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.22.1.2
h3cOltUsingOnuRowStatus This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.10.2.42.1.3.22.1.3

This table is used for getting silent ONU's LOID information of an OLT.

h3cOnuSilentLoidEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.23.1

The entry of the table h3cOnuSilentLoidTable.

Indexes

IF-MIBifIndex h3cOnuSilentLoid

Column	Syntax	OID
h3cOnuSilentLoid The LOID of a silent ONU in an OLT.	OctetString Constraints: range: 1-24	.1.3.6.1.4.1.2011.10.2.42.1.3.23.1.1
h3cOnuSilentLoidTime The aging time of a silent ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.3.23.1.2

This table is used for setting ONU's Tx power on an OLT.

h3cOltTransceiverTxPowerEntry row .1.3.6.1.4.1.2011.10.2.42.1.3.24.1

The entry of the table h3cOltTransceiverTxPowerTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOltTransTxPwrTransId The transceiver ID of an ONU in an OLT.	Enumerationr/w Enumerated Values: 0 main 1 standby 2 all	.1.3.6.1.4.1.2011.10.2.42.1.3.24.1.1
h3cOltTransTxPwrOffTime The turnoff time of the transceiver Tx power.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.42.1.3.24.1.2
h3cOltTransTxPwrIsAllOnu Setting all ONUs' transceiver Tx power or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.3.24.1.3
h3cOltTransTxPwrOnuIfList ONUs' ifIndex for which the transceiver Tx power is to be set.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.2011.10.2.42.1.3.24.1.4

This table implements the following functions for ONUs:
1. Encrypting all downstream/upstream and
downstream directions traffic destined to and
originated from a specific LLID
(ONU in current implementation).
2. Restart a process of ONU authentication, using
the OLT (IEEE 802.1x) authenticator.

h3cOnuSysManEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.1.1

The entry of the table h3cOnuSysManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuEncryptMan Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. I…	Enumerationr/w Enumerated Values: 1 off 2 downlink 3 updownlink	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.1
h3cOnuReAuthorize Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remai…	Enumerationr/w Enumerated Values: 1 reAuthorize	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.2
h3cOnuMulticastFilterStatus true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.3
h3cOnuDbaReportQueueSetNumber The number of queue sets reported in MPCP report frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.4
h3cOnuRemoteFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error co…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.5
h3cOnuPortBerStatus enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.6
h3cOnuReset Reboot ONU.	Enumerationr/w Enumerated Values: 1 reset	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.7
h3cOnuMulticastControlMode igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.	Enumerationr/w Enumerated Values: 1 igmpsnooping 2 multicastcontrol	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.8
h3cOnuAccessVlan The VLAN ID assigned to untagged frames received on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.9
h3cOnuEncryptKey The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.10
h3cOnuUniUpDownTrapStatus true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.11
h3cOnuFecStatus Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.12
h3cOnuMcastCtrlHostAgingTime The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.13
h3cOnuMulticastFastLeaveEnable true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.14
h3cOnuPortIsolateEnable true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.15
h3cOnuMacAddressTimer no-aging(0) - Disable aging. others - Aging time(seconds).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.42.1.5.1.1.16

LLID link test applying to the ONU only including delay
measurement option.  The command tests a link to a single
LLID over a period of time or once, using a variable
number of measurement frames.  The length of the measurement
frames is also parameterized.  The test uses a loopback
mode of the ONU to return each measurement frame,
loopback activation is done using randomly patterned
OAM Protocol Data Unit(PDU) frames.

h3cOnuLinkTestEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.2.1

The entry of h3cOnuLinkTestEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuLinkTestFrameNum Exact number of measurement frames.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.1
h3cOnuLinkTestFrameSize Measurement frames data size, measured in bytes. Not including Preamble, SFD, VLAN tag, and FCS. Frame size minimum value is 56 - if VLAN tag is enabled('VLAN enable' field is set to ENABLE), and 60 - if VLAN tag is dis…	Integer32r/w Constraints: range: 60-1514	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.2
h3cOnuLinkTestDelay true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measu…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.3
h3cOnuLinkTestVlanTag true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.4
h3cOnuLinkTestVlanPriority VLAN priority: 0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.5
h3cOnuLinkTestVlanTagID VLAN ID: 1-4094.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.6
h3cOnuLinkTestResultSentFrameNum The total number of frames sent during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.7
h3cOnuLinkTestResultRetFrameNum The total number of frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.8
h3cOnuLinkTestResultRetErrFrameNum The total number of error frames return back during the link test process.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.9
h3cOnuLinkTestResultMinDelay The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay'…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.10
h3cOnuLinkTestResultMeanDelay The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay'…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.11
h3cOnuLinkTestResultMaxDelay The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'h3cOnuLinkTestDelay'…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.2.1.12

Set bandwidth policy parameters(restrictions)for a LLID
(only for the ONU).  Default policies are set to disable.
Policy parameters will be erased upon LLID network disconnection.

h3cOnuBandWidthEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.3.1

The entry of table h3cOnuBandWidthTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuDownStreamBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.1
h3cOnuDownStreamMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.2
h3cOnuDownStreamMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.3
h3cOnuDownStreamHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.4
h3cOnuDownStreamShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.5
h3cOnuP2PBandWidthPolicy true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.6
h3cOnuP2PMaxBandWidth Maximum bandwidth allowed for the ONU, measured in Kbits/Sec.	Integer32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.7
h3cOnuP2PMaxBurstSize Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes.	Integer32r/w Constraints: range: 0-8388480	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.8
h3cOnuP2PHighPriorityFirst true:Enable high priority frames preference. false:Disable high priority frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.9
h3cOnuP2PShortFrameFirst true:Enable short frames preference. false:Disable short frames preference.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.3.1.10

Two types of DBA algorithm are supported in the ONU.
The internal SLA based algorithm is always activated.
This table defines the primary parameter about the
internal SLA algorithm.

h3cOnuSlaManEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.4.1

The entry of table h3cOnuSlaManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuSlaMaxBandWidth Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.1
h3cOnuSlaMinBandWidth Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.2
h3cOnuSlaBandWidthStepVal Granularity of bandwidth - measured in Kbit/s. The value of h3cOnuSlaMaxBandWidth and h3cOnuSlaMinBandWidth should be the multiple of the value of this object.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.3
h3cOnuSlaDelay low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.	Enumerationr/w Enumerated Values: 1 low 2 high	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.4
h3cOnuSlaFixedBandWidth Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of h3cOnuSlaBandWidthStepVal.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.5
h3cOnuSlaPriorityClass Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.6
h3cOnuSlaFixedPacketSize Fixed packet size - measured in byte. The value of this object should be valid when h3cOnuSlaFixedBandWidth is configured.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.7
h3cOnuSlaWrrBandWidth The WRR weight will be used to compute the remaining bandwidth allocation after each CIR has been guaranteed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.4.1.8

Primary status of the specified ONU.
There will be one row in this table for each
information in the system.
(1)Software and hardware versions of the specified ONU
(h3cOnuHardMajorVersion, h3cOnuHardMinorVersion,
h3cOnuUniMacType)
(2)Several physical capabilities of the ONU.
(h3cOnuLaserOnTime, h3cOnuLaserOffTime,
h3cOnuGrantFifoDep.)
(3)The operation(activation) status of the ONU.
(h3cOnuWorkMode)

h3cOnuInfoEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.5.1

The entry of the h3cOnuInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuHardMajorVersion ONU hardware major version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.1
h3cOnuHardMinorVersion ONU hardware minor version. If the object length is zero, it means the version is unknown.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.2
h3cOnuSoftwareVersion ONU software version.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.3
h3cOnuUniMacType ONU User Network Interface(UNI) port MAC type.	Enumeration Enumerated Values: 1 other 2 mii 3 gmii 4 tbi	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.4
h3cOnuLaserOnTime The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOnTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.5
h3cOnuLaserOffTime The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means h3cOnuLaserOffTime is unknown.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.6
h3cOnuGrantFifoDep Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value.	Integer32 Constraints: range: 2147483647-2147483647 range: 1-255	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.7
h3cOnuWorkMode The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registe…	Enumeration Enumerated Values: 1 other 2 on 3 pending 4 off	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.8
h3cOnuPCBVersion ONU PCB version.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.9
h3cOnuRtt The signal round-trip-time(RTT) received.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.10
h3cOnuEEPROMVersion ONU EEPROM version.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.11
h3cOnuRegType ONU registered type.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.12
h3cOnuHostType ONU host type.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.13
h3cOnuDistance The distance between OLT and ONU, measured in meter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.14
h3cOnuLlid The link layer identifier, which uniquely identifies the ONU of a specific OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.15
h3cOnuVendorId ONU vendor ID.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.16
h3cOnuFirmwareVersion ONU firmware version.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.17
h3cOnuOpticalPowerReceivedByOlt The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.5.1.18

This table used for getting MAC address information of ONU.

h3cOnuMacAddrInfoEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.6.1

The entry of the h3cEponOnuMacAddrInfoTable.

Indexes

IF-MIBifIndex h3cOnuMacIndex

Column	Syntax	OID
h3cOnuMacIndex The index of ONUs in one OLT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.6.1.1
h3cOnuMacAddrFlag The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one…	Enumeration Enumerated Values: 1 bound 2 registered 3 run 4 regIncorrect	.1.3.6.1.4.1.2011.10.2.42.1.5.6.1.2
h3cOnuMacAddress The MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.5.6.1.3

This table implements the following functions for ONUs:
Bind MAC of ONU.

h3cOnuBindMacAddrEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.7.1

The entry of the table h3cOnuBindMacAddrTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuBindMacAddress Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and c…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.5.7.1.1
h3cOnuBindType Set the binding type with the ONU which is confined to the index of h3cEponOnuTypeDescr.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.7.1.2
h3cOnuBindLoid Bind the LOID of ONU. While the LOID is not bound, the ONU can not go into effect and configurations can not be set.	OctetStringr/w Constraints: range: 0-24	.1.3.6.1.4.1.2011.10.2.42.1.5.7.1.3
h3cOnuBindPassword The password of LOID by using LOID-PASSWORD binding type to bind ONU. A zero-length string will be returned when reading.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.2011.10.2.42.1.5.7.1.4

This table implements the following functions for ONUs:
1. Update the ONU firmware.
2. Result of update ONU firmware.

h3cOnuFirmwareUpdateEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.8.1

The entry of the table h3cOnuFirmwareUpdateTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuUpdate update(1): Update the ONU firmware. Config the MIB object module h3cEponOnuUpdateFileName with the filename of ONU firmware first.	Enumerationr/w Enumerated Values: 1 update	.1.3.6.1.4.1.2011.10.2.42.1.5.8.1.1
h3cOnuUpdateResult The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file doe…	Enumeration Enumerated Values: 1 updating 2 ok 3 fail 4 fileNotExist 5 notSetFilename 6 fileNotMatchONU 7 timeout 8 otherError	.1.3.6.1.4.1.2011.10.2.42.1.5.8.1.2
h3cOnuUpdateFileName The filename of the ONU firmware to be updated. Note that the filename must contain the file path.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.5.8.1.3
h3cOnuUpdateProtType private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.	Enumerationr/w Enumerated Values: 0 private 1 ctc	.1.3.6.1.4.1.2011.10.2.42.1.5.8.1.4

This table is used for getting ONU bind type in current version.

h3cEponOnuTypeManEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.15.1

The entry of the h3cEponOnuTypeManTable.

Indexes

h3cEponOnuTypeIndex

Column	Syntax	OID
h3cEponOnuTypeIndex The ONU type index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.15.1.1
h3cEponOnuTypeDescr The ONU type description which can be used to bind ONU in current version. the value of h3cOnuBindType can be configured by the index of h3cEponOnuTypeDescr.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.15.1.2

This table implements the following functions:
(1)Manage packet priority trust mode.
(2)Manage packet queue-scheduler mode.

h3cOnuPacketManEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.16.1

The entry of the h3cOnuPacketManTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuPriorityTrust The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.	Enumerationr/w Enumerated Values: 1 dscp 2 ipprecedence 3 cos	.1.3.6.1.4.1.2011.10.2.42.1.5.16.1.1
h3cOnuQueueScheduler The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.	Enumerationr/w Enumerated Values: 1 spq 2 wfq	.1.3.6.1.4.1.2011.10.2.42.1.5.16.1.2

This table implements the following functions:
(1)Manage STP status.
(2)Manage IGMP-snooping.
(3)Manage DHCP-snooping.

h3cOnuProtocolEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.17.1

The entry of h3cOnuProtocolTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuStpStatus true(1) - STP status enable on ONU. false(2) - STP status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.1
h3cOnuIgmpSnoopingStatus true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.2
h3cOnuDhcpsnoopingOption82 true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.3
h3cOnuDhcpsnooping true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.4
h3cOnuPppoe true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.5
h3cOnuIgmpSnoopingHostAgingT Set the host aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.6
h3cOnuIgmpSnoopingMaxRespT Set the max response time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.7
h3cOnuIgmpSnoopingRouterAgingT Set the router aging time of IGMP on ONU.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.8
h3cOnuIgmpSnoopingAggReportS true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.9
h3cOnuIgmpSnoopingAggLeaveS true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.17.1.10

This table implements the following functions:
(1)Manage 802.1x account.
(2)Manage 802.1x password.
ONU will be authorized to send and receive frames when the
account and the password are all right, otherwise this ONU
will be unavailable.

h3cOnuDot1xEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.18.1

The entry of the h3cOnuDot1xTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuDot1xAccount ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with h3cOnuDot1xPassword.	OctetStringr/w	.1.3.6.1.4.1.2011.10.2.42.1.5.18.1.1
h3cOnuDot1xPassword ONU 802.1X password. The object should be set together with h3cOnuDot1xAccount.	OctetStringr/w	.1.3.6.1.4.1.2011.10.2.42.1.5.18.1.2

This table contains specific information of priority queue.

h3cOnuPriorityQueueEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.19.1

The entry of h3cOnuPriorityQueueTable.

Indexes

IF-MIBifIndex h3cOnuQueueDirection h3cOnuQueueId

Column	Syntax	OID
h3cOnuQueueDirection The direction of priority queue.	Enumeration Enumerated Values: 1 inbound 2 outbound	.1.3.6.1.4.1.2011.10.2.42.1.5.19.1.1
h3cOnuQueueId The queue ID of priority queue.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2011.10.2.42.1.5.19.1.2
h3cOnuQueueSize The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.19.1.3

This table contains statistics of ONU port.

h3cOnuCountEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.20.1

The entry of h3cOnuCountTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuInCRCErrPkts The total number of frames received with bad CRC checksum.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.42.1.5.20.1.1
h3cOnuOutDroppedFrames The total number of frames dropped because of buffer failure.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.10.2.42.1.5.20.1.2

This table contains specific bandwidth information of ONU priority queue.

h3cOnuQueueBandwidthEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.22.1

The entry of h3cOnuQueueBandwidthTable.

Indexes

IF-MIBifIndex h3cOnuQueueDirection h3cOnuQueueId

Column	Syntax	OID
h3cOnuQueueMaxBandwidth The maximum bandwidth of specific ONU priority queue, measured in 100Kbps.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.22.1.1
h3cOnuQueueMaxBurstsize The maximum burst size of specific ONU priority queue, measured in 64Bytes.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.22.1.2
h3cOnuQueuePolicyStatus true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.22.1.3

ONU IP address table.

h3cOnuIpAddressEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.23.1

The entry of h3cOnuIpAddressTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuIpAddress The IP address assigned to the ONU.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.1
h3cOnuIpAddressMask The mask of IP address denoted by h3cOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.2
h3cOnuIpAddressGateway The gateway of IP address denoted by h3cOnuIpAddress.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.3
h3cOnuDhcpallocate true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.4
h3cOnuManageVID The management VLAN of ONU denoted by h3cOnuManageVID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.5
h3cOnuManageVlanIntfS The management interface status of ONU denoted by h3cOnuManageVlanIntfS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.23.1.6

ONU vendor specific information of ONU.

h3cOnuChipSetInfoEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.24.1

The entry of h3cOnuChipSetInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuChipSetVendorId Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.5.24.1.1
h3cOnuChipSetModel Chip model, numbering(range from 0 to 0xFF) by the chip vendor.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2011.10.2.42.1.5.24.1.2
h3cOnuChipSetRevision Chip revision.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.24.1.3
h3cOnuChipSetDesignDate Chip design date.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.10.2.42.1.5.24.1.4

Capability of ONU.

h3cOnuCapabilityEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.25.1

The entry of the table h3cOnuCapabilityTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuServiceSupported Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supp…	Bits Enumerated Values: 0 geinterfacesupport 1 feinterfacesupport 2 voipservicesupport 3 tdmservicesupport	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.1
h3cOnuGEPortNumber The current gigabit ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.2
h3cOnuFEPortNumber the current fast ethernet ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.3
h3cOnuPOTSPortNumber The current POTS ports number supported by the ONU	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.4
h3cOnuE1PortsNumber The current E1 ports number supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.5
h3cOnuUpstreamQueueNumber The number of upstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.6
h3cOnuMaxUpstreamQueuePerPort The number of maximum upstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.7
h3cOnuDownstreamQueueNumber The number of downstream queues supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.8
h3cOnuMaxDownstreamQueuePerPort The number of maximum downstream queues per port of the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.9
h3cOnuBatteryBackup true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.10
h3cOnuIgspFastLeaveSupported true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.11
h3cOnuMCtrlFastLeaveSupported true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.12
h3cOnuType ONU type: SFU(0) HGU(1) SBU(2) MDU(3) which is cassette equipment and uses Ethernet access as broadband MDU(4) which is small card equipment and uses Ethernet access as broadband MDU(5) which is small card equipment and…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.13
h3cOnuMultiLLID (0) - Invalid value. (1) - ONU supports one LLID. other - ONU supports multiple LLIDs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.14
h3cOnuProtectionType (0) - Not supported. (1) - ONU supports type C optical link protection. (2) - ONU supports type D optical link protection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.15
h3cOnuPonIFNum (1) - ONU support one PON interface. (2) - ONU support two PON interfaces.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.16
h3cOnuSlotNum The slot number of a card ONU. If the ONU is not card equipment, 0 is returned.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.17
h3cOnuIPv6Supported (0) - ONU supports IPv6. (1) - ONU does not support IPv6.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.18
h3cOnuPowerSupplyControl (0) - ONU does not support ONU power supply control. (1) - ONU supports Tx power supply control only. The Tx and Rx power supply can only be controlled together whereby Rx power supply is also shutdown when Tx power sup…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.19
h3cOnuServiceSLA (1) - ONU does not support SLA services. (2~8) - ONU supports 2~8 SLA services.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.25.1.20

This table defines the information of DBA(dynamic bandwidth allocation)
report threshold contained in the MPCP report frames.

h3cOnuDbaReportEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.26.1

The entry of the table h3cOnuDbaReportTable.

Indexes

IF-MIBifIndex h3cOnuDbaReportQueueId

Column	Syntax	OID
h3cOnuDbaReportQueueId The DBA report queue ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.26.1.1
h3cOnuDbaReportThreshold The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.26.1.2
h3cOnuDbaReportStatus enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.10.2.42.1.5.26.1.3

Table of map of the COS to local-precedence.

h3cOnuCosToLocalPrecedenceEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.27.1

Configuration information of map of the COS to local precedence.

Indexes

IF-MIBifIndex h3cOnuCosToLocalPrecedenceCosIndex

Column	Syntax	OID
h3cOnuCosToLocalPrecedenceCosIndex Index of the map, obtains from packet cos value.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2011.10.2.42.1.5.27.1.1
h3cOnuCosToLocalPrecedenceValue Value of local precedence.	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.2011.10.2.42.1.5.27.1.2

Table of ONU STP ports.

h3cEponOnuStpPortEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.28.1

Configuration information of ONU STP ports.

Indexes

IF-MIBifIndex h3cEponStpPortIndex

Column	Syntax	OID
h3cEponStpPortIndex The index of the STP ports.	Integer32 Constraints: range: 0-144	.1.3.6.1.4.1.2011.10.2.42.1.5.28.1.1
h3cEponStpPortDescr The description of the STP ports.	OctetString	.1.3.6.1.4.1.2011.10.2.42.1.5.28.1.2
h3cEponStpPortState The current state of the port (i.e. disabled, discarding, learning and forwarding).	Enumeration Enumerated Values: 1 disabled 2 discarding 3 learning 4 forwarding	.1.3.6.1.4.1.2011.10.2.42.1.5.28.1.3

This table is used for getting ONU physical information.

h3cOnuPhysicalEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.29.1

The entry of the h3cOnuPhysicalTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
h3cOnuBridgeMac The bridge MAC address of ONU.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.5.29.1.1
h3cOnuFirstPonMac The MAC address of ONU first PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.5.29.1.2
h3cOnuFirstPonRegState The register state of ONU first PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.2011.10.2.42.1.5.29.1.3
h3cOnuSecondPonMac The MAC address of ONU second PON port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.10.2.42.1.5.29.1.4
h3cOnuSecondPonRegState The register state of ONU second PON port.	Enumeration Enumerated Values: 1 notExist 2 absent 3 offline 4 silent 5 down 6 up	.1.3.6.1.4.1.2011.10.2.42.1.5.29.1.5

This table is used for getting ONU SMLK information.

h3cOnuSmlkEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.30.1

The entry of the h3cOnuSmlkTable.

Indexes

IF-MIBifIndex h3cOnuSmlkGroupID

Column	Syntax	OID
h3cOnuSmlkGroupID The SMLK group ID of ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.30.1.1
h3cOnuSmlkFirstPonRole The role of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.2011.10.2.42.1.5.30.1.2
h3cOnuSmlkFirstPonStatus The transmitting status of ONU first PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.2011.10.2.42.1.5.30.1.3
h3cOnuSmlkSecondPonRole The role of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 master 2 slave 3 null	.1.3.6.1.4.1.2011.10.2.42.1.5.30.1.4
h3cOnuSmlkSecondPonStatus The transmitting status of ONU second PON port in a SMLK group.	Enumeration Enumerated Values: 1 active 2 standby 3 down 4 null	.1.3.6.1.4.1.2011.10.2.42.1.5.30.1.5

Property table.

h3cOnuRS485PropertiesEntry row .1.3.6.1.4.1.2011.10.2.42.1.5.31.1

The entry of property table.

Indexes

IF-MIBifIndex h3cOnuRS485SerialIndex

Column	Syntax	OID
h3cOnuRS485SerialIndex The index of serial port.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.1
h3cOnuRS485BaudRate The port baud rate.	Enumerationr/w Enumerated Values: 1 baudRate300 2 baudRate600 3 baudRate1200 4 baudRate2400 5 baudRate4800 6 baudRate9600 7 baudRate19200 8 baudRate38400 9 baudRate57600 10 baudRate115200	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.2
h3cOnuRS485DataBits The port number of data bits in a character.	bitEnumerationr/w Enumerated Values: 1 five 2 six 3 seven 4 eight	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.3
h3cOnuRS485Parity The port sense of a character parity bit.	Enumerationr/w Enumerated Values: 1 none 2 odd 3 even 4 mark 5 space	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.4
h3cOnuRS485StopBits The port number of stop bits.	bitEnumerationr/w Enumerated Values: 1 one 2 two 3 oneAndHalf	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.5
h3cOnuRS485FlowControl The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.	Enumerationr/w Enumerated Values: 1 none 2 hardware 3 xonOrxoff	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.6
h3cOnuRS485TXOctets The number of output octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.7
h3cOnuRS485RXOctets The number of input octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.8
h3cOnuRS485TXErrOctets The number of output error octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.9
h3cOnuRS485RXErrOctets The number of input error octets about the port. The unit is byte.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.10
h3cOnuRS485ResetStatistics Reset the counters to zero, including h3cOnuRS485TXOctets, h3cOnuRS485RXOctets, h3cOnuRS485TXErrOctets and h3cOnuRS485RXErrOctets.	Enumerationr/w Enumerated Values: 1 counting 2 clear	.1.3.6.1.4.1.2011.10.2.42.1.5.31.1.11