H3C-DOT11-STATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
81
.1.3.6.1.4.1.2011.10.2.75.3.1.1 · 1 row entry · 43 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11StationAssociateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-STATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-STATION-MIB::h3cDot11StationAssociateTable'
This table contains the information of stations which are
associating with the wireless network (current AC).
h3cDot11StationAssociateEntry row .1.3.6.1.4.1.2011.10.2.75.3.1.1.1
Each entry contains association information of each station.
Column Syntax OID
Represents the unique MAC Address of station.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.1
Represents the IP address of the station.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.2
Represents the user name of the station.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.3
Represents the current transmit data rates for this station.
Each byte will represent one rate. If the MSB(Most significant bit)
is set, then this rate is a mandantory rate. Otherwise,
it is optional.
MbpsOctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.4
The time in seconds, how long this station has been associated
with this device.
secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.5
Represents a device-dependent measure of the signal strength
of latest packet received from this station.
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.6
Represents a device-dependent measure of the RSSI.
It is the received signal strength indication.
The maximum value is defined by chip set vendors
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.7
Represents current radio channel used by station.
H3C-DOT11-REF-MIBH3cDot11ChannelScopeType .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.8
Represents the power management mode of this station.
The following values are supported:
active - This station is not in power-save
mode and it is actively sending or
receiving data.
powersave - This station is in p…
Enumeration
Enumerated Values:
1active
2powersave
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.9
Represents the association identification number of station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.10
Represents Vlan ID to which the station is associated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.11
Represents the ESS name.
H3C-DOT11-REF-MIBH3cDot11SSIDStringType .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.12
Represents the Authentication mode defined by 802.11.
H3C-DOT11-REF-MIBH3cDot11AuthenType
Type Values:
1none
2opensystem
3sharedkey
4all
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.13
Represents the key management mode defined by 802.11i.
H3C-DOT11-REF-MIBH3cDot11AKMType
Type Values:
1none
2psk
3dot1x
4ext
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.14
Represents the frame encryption cipher type used by
station.
H3C-DOT11-REF-MIBH3cDot11CipherType
Type Values:
1none
2wep40
4tkip
16aesccmp
32wep104
64wpisms4
128wep128
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.15
Represents the encryption mode for this ESS.
H3C-DOT11-REF-MIBH3cDot11SSIDEncryptModeType
Type Values:
1cleartxt
2cipher
3ext
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.16
Represents the signal and noise strength ratio of frame reception.
One PercentSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.17
Represents the transmission rate of frame.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.18
Represents the reception rate of frame.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.19
Represents the vendor name of the station.
OctetString
Constraints:
range: 0-127
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.20
Represents which radio type supported by the station.
The WLAN system support the following possible radio types.
dot11a(1),
dot11b(2),
dot11g(4),
dot11n(8),
dot11gn(16),
dot11an(32),
dot11ac(64),
dot11gac(128)
For a st…
H3C-DOT11-REF-MIBH3cDot11RadioType
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
128dot11gac
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.21
Represents the received noise of the station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.22
Represents MAC Address of station.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.23
Represents the bytes of transmitted data frames to the
station per second in sample interval.
byte/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.24
Represents the bytes of received data frames from the
station per second in sample interval.
byte/sSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.25
Represents the QoS mode of station.
The following values are supported:
wmm - This QoS function is supported by this station.
nonwmm - This QoS function is not supported by this station.
Enumeration
Enumerated Values:
1wmm
2nonwmm
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.26
Represents the security Information element for this station.
H3C-DOT11-REF-MIBH3cDot11SecIEStatusType
Type Values:
1none
2rsn
3wpa
4all
5ext
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.27
Represents how long this station has been associated
with this device.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.28
Represents which radio type supported by the station.
The WLAN system support the following possible radio types.
dot11a(1),
dot11b(2),
dot11g(4),
dot11an(8),
dot11gn(16),
dot11ac(32),
dot11gac(64)
For a station,it coul…
H3C-DOT11-REF-MIBH3cDot11RadioType2
Type Values:
1dot11a
2dot11b
4dot11g
8dot11an
16dot11gn
32dot11ac
64dot11gac
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.29
Represents the time at which the station connected.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.30
Represents the type of user authentication with this station.
portalAuth - The authentication lunched by portal pop-up program
which is need input username and passward,exclude MAC authentication.
authFree - The…
Enumeration
Enumerated Values:
1portalAuth
2authFree
3associateAuth
4macAuth
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.31
This object is used to start rfping test of the station.
It will return false for get operation.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.32
Represents the max negotiation rate of the station.
MbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.33
Represents the power management mode of the client.
The following values are supported:
active - This client is not in power-save
mode and it is actively sending or receiving data.
powersave - This client is in power…
Enumeration
Enumerated Values:
0active
1powersave
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.34
Represents the authentication mode defined by 802.11.
The following values are supported:
opensystem - Do not authenticate.
sharedkey - System will use challenge message to
authenticate the client.
Enumeration
Enumerated Values:
0opensystem
1sharedkey
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.35
Represents the key management mode defined by 802.11i.
The following values are supported:
none - no key management mode configured,
psk - pre-shared key authentication,
radius - 802.1x authentica…
Enumeration
Enumerated Values:
0none
1psk
2radius
3wlanex
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.36
Represents the frame encryption cipher type used by
station.
The following values are supported:
none - clear text or no cipher method is configure,
wep40 - 40-bit WEP key,
wep104 - 104-bit WEP key,
tkip - …
Enumeration
Enumerated Values:
0none
1wep40
2wep104
3tkip
4aesccmp
5wpisms4
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.37
Represents the security Information element for this station.
The following values are supported:
none - both wpa and wpa2 are disabled,
wpa - only enable wpa,
wpa2 - only enable wpa2,
wlanex - only enable wl…
Enumeration
Enumerated Values:
0none
1wpa
2wpa2
3wlanex
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.38
Represents the IPv6 address of the station.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.39
Represents MAC address of the AP to be associated.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.2011.10.2.75.3.1.1.1.40
Represents the device type of stations to be associated.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.41
Represents the transmit rate of frames.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.42
Represents the receive rate of frames.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.1.1.43
.1.3.6.1.4.1.2011.10.2.75.3.1.2 · 1 row entry · 4 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11StationAPRelationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-STATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-STATION-MIB::h3cDot11StationAPRelationTable'
This table contains relation-ship between station, AP, Radio
and WLANID, and the detailed information of station is kept in
the h3cDot11StaAssociateTable table.
h3cDot11StationAPRelationEntry row .1.3.6.1.4.1.2011.10.2.75.3.1.2.1
Each entry contains relation-ship information
with AP, Radio and WLANID of each station.
Column Syntax OID
To uniquely identify each AP, and relation-ship
between h3cDot11CurrAPID and AP device will be static.
H3C-DOT11-REF-MIBH3cDot11ObjectIDType
Type Constraints:
range: 0..127
.1.3.6.1.4.1.2011.10.2.75.3.1.2.1.1
Represents each radio.
H3C-DOT11-REF-MIBH3cDot11RadioScopeType .1.3.6.1.4.1.2011.10.2.75.3.1.2.1.2
Represents WLAN ID of the BSS the station associated to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.2.1.3
Represents Antenna ID of the station associated to.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.2.1.4
.1.3.6.1.4.1.2011.10.2.75.3.1.3 · 1 row entry · 27 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11StationStatisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-STATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-STATION-MIB::h3cDot11StationStatisTable'
This table contains statistics and status of all
stations in the h3cDot11StaAssociateTable.
h3cDot11StationStatisEntry row .1.3.6.1.4.1.2011.10.2.75.3.1.3.1
This entry contains statistics and status for each station.
Column Syntax OID
Represents the count of frames that are received by AP from station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.1
Represents the count of frames that are sent to station from AP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.2
Represents the count of frames that are dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.3
Represents the count of bytes that are received by AP from station.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.4
Represents the count of bytes that are sent to station from AP.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.5
Represents how many bytes are dropped.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.6
Represents the count of frames that are retransmitted to AP from station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.7
Represents the count of frames that are retransmitted to station from AP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.8
Represents the count of bytes that are retransmitted to AP from station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.9
Represents the count of bytes that are retransmitted to station from AP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.10
Represents how many payload bytes of data frame are sent and received
by station.
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.11
Represents how many frames have been successfully sent to station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.12
Represents how many data frames have been successfully sent to
station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.13
Represents how many data frames have been received from station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.14
Represents how many data frames have been sent to station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.15
Represents how many bytes of data frames have been received
from station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.16
Represents how many bytes of data frames have been sent to
station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.17
Represents the number of fragmented data frames that received
from station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.18
Represents the count of error data frames that are received by AP
from station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.19
Represents the count of data frames that are retransmitted to station
from AP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.20
Represents how many data frames of each rate have been received
from station.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.3.1.21
Represents how many data frames of each rate have been sent to
station.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.3.1.22
Represents how many data frames of different signal strength have been
received from station.
OctetString .1.3.6.1.4.1.2011.10.2.75.3.1.3.1.23
Internet traffic bytes received from station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.24
Internet traffic bytes sent to station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.25
Local traffic bytes received from station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.26
Local traffic bytes sent to station.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.2011.10.2.75.3.1.3.1.27
.1.3.6.1.4.1.2011.10.2.75.3.1.4 · 1 row entry · 7 columns
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk h3cDot11StationRfPingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-DOT11-STATION-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-DOT11-STATION-MIB::h3cDot11StationRfPingTable'
This table contains statistics of all
stations in the h3cDot11StationRfPingTable.
h3cDot11StationRfPingEntry row .1.3.6.1.4.1.2011.10.2.75.3.1.4.1
This entry contains statistics for each station's RfPing results.
Column Syntax OID
Represents the rate index for the station.
Integer32
Constraints:
range: 0-214783647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.1
Represents the rate at which the radio interface sends wireless ping frames.
MbpsOctetString .1.3.6.1.4.1.2011.10.2.75.3.1.4.1.2
Represents the number of wireless ping frames that the radio interface sent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.3
Represents the number of wireless ping frames that
the radio interface received from the client.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.4
Represents the client signal strength detected by the AP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.5
Represents the total number of retransmitted ping frames.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.6
Round-trip time (RTT) from the time when the radio interface send a
ping packet to the time when it receives a response from the client.
msSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.10.2.75.3.1.4.1.7