H3C-COMMON-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

hwSystemDiagInfoTable

table
.1.3.6.1.4.1.2011.10.6.13 · 1 row entry · 6 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwSystemDiagInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-COMMON-SYSTEM-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-COMMON-SYSTEM-MIB::hwSystemDiagInfoTable' 
This table is used to write diagnosis-information file.
hwSystemDiagInfoEntry row .1.3.6.1.4.1.2011.10.6.13.1
The entry of hwSystemDiagInfoTable.
The maximum number of entries of this table is 10.
When creating a new entry if there are already
10 entries in this table, the oldest entry will be
deleted automatically.
Indexes
No indexes recorded
Column Syntax OID
hwSystemDiagInfoIndex
Specifies the index of an entry.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.2011.10.6.13.1.1
hwSystemDiagInfoFilename
Specifies the name of diagnosis-information file.
When creating a row without this column, the system
will generate a default filename instead.
OctetStringr/w .1.3.6.1.4.1.2011.10.6.13.1.2
hwSystemDiagInfoRowStatus
The row status of this entry.
Only active, createAndGo, and destroy are supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.10.6.13.1.3
hwSystemDiagInfoOperEndTime
The time when this operation was completed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.2011.10.6.13.1.4
hwSystemDiagInfoOperState
The state of this operation.
If the state of this operation is opFailure, the detailed
information can be read by hwSystemDiagInfoOperFailReason.
Enumeration .1.3.6.1.4.1.2011.10.6.13.1.5
hwSystemDiagInfoOperFailReason
The failure reasons of this operation.
OctetString .1.3.6.1.4.1.2011.10.6.13.1.6

hwSystemWorkingModeTable

table
.1.3.6.1.4.1.2011.10.6.14.1 · 1 row entry · 3 columns
Open in standard view
Uses the h3c variant from /opt/observium/mibs/h3c.
Command help
Walk hwSystemWorkingModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-COMMON-SYSTEM-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-COMMON-SYSTEM-MIB::hwSystemWorkingModeTable' 
This table is used to show the system operating mode information.
The supported features and the specifications of the
supported features vary by system operating mode.
The mode will take effect on the entire device.
hwSystemWorkingModeEntry row .1.3.6.1.4.1.2011.10.6.14.1.1
The entry of hwSystemtemWorkingModeTable.
Indexes
No indexes recorded
Column Syntax OID
hwSystemWorkingModeIndex
The unique index of hwSystemWorkingModeTable.
The value should be a a small-incremental integer.
An index value uniquely identifies a system operating mode.
Integer32 .1.3.6.1.4.1.2011.10.6.14.1.1.1
hwSystemWorkingModeName
The name that uniquely identifies the system operating mode.
The value should not contain blank spaces.
OctetString .1.3.6.1.4.1.2011.10.6.14.1.1.2
hwSystemWorkingModeDescr
Description of the system operating mode.
OctetString .1.3.6.1.4.1.2011.10.6.14.1.1.3