H3C-ARP-RATELIMIT-MIB
This MIB file defines the ARP packet rate limit configuration.
The ARP packet rate limit feature monitors and controls the
rate of ARP packets delivered to the CPU on a device. The
current version supports the monitoring feature only.
- Source file
H3C-ARP-RATELIMIT-MIB- Last revised
- Identity
h3cARPRatelimit- Base OID
1.3.6.1.4.1.2011.10.2.110
Imported Objects
| HUAWEI-3COM-OID-MIB | h3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
Net-SNMP examples using the h3c MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'H3C-ARP-RATELIMIT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'H3C-ARP-RATELIMIT-MIB::h3cARPRatelimit'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'H3C-ARP-RATELIMIT-MIB' -M '/opt/observium/mibs/h3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'H3C-ARP-RATELIMIT-MIB::h3cARPRatelimit'
Objects (12)
.1.3.6.1.4.1.2011.10.2.110 |
||
.1.3.6.1.4.1.2011.10.2.110.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.1.0 |
||
.1.3.6.1.4.1.2011.10.2.110.1.1.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.1.1.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.1.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.2011.10.2.110.1.1.1.3 |
|
.1.3.6.1.4.1.2011.10.2.110.1.2 |
||
.1.3.6.1.4.1.2011.10.2.110.1.2.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.2.1.1 |
||
.1.3.6.1.4.1.2011.10.2.110.1.2.1.1.1 |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.2011.10.2.110.1.1.0.1 |
If the rate of ARP packets delivered to the CPU on a device
exceeds the threshold, a trap message is generated and sent to the remote monitoring device. |
