GUDEADS-EPC8X-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
13

epc8TrapIPTable

table
.1.3.6.1.4.1.28507.1.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk epc8TrapIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC8X-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC8X-MIB::epc8TrapIPTable' 
list of all Trap receiver
epc8TrapIPEntry row .1.3.6.1.4.1.28507.1.1.1.2.1
an entry containing management
informations regarding the list of trap
receivers
Indexes
Column Syntax OID
epc8TrapIPIndex
A unique value, greater than zero, for each receiver slot.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.28507.1.1.1.2.1.1
epc8TrapIPAddr
IP Address specifying one Trap receiver slot.
A value of '00000000'H disables this slot.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.28507.1.1.1.2.1.2
epc8TrapIPPort
IP Port specifying one Trap receiver slot.
A value of 0 disables this slot.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.28507.1.1.1.2.1.3

epc8portTable

table
.1.3.6.1.4.1.28507.1.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk epc8portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC8X-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC8X-MIB::epc8portTable' 
list of all EPC Powerports
epc8portEntry row .1.3.6.1.4.1.28507.1.1.2.2.1
An entry containing management information applicable to a
particular powerport.
Indexes
Column Syntax OID
epc8PortIndex
A unique value, greater than zero, for each PowerPort.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.28507.1.1.2.2.1.1
epc8PortName
A textual string containing name of a PowerPort.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.28507.1.1.2.2.1.2
epc8PortState
current state a PowerPort
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.28507.1.1.2.2.1.3
epc8PortSwitchCount
The total number of switch actions ocurred on a PowerPort.
Does not count switch commands which will not switch
the ralay state, so just real relay switches are displayed here.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.28507.1.1.2.2.1.4
epc8PortStartupMode
set Mode of startup sequence (off, on , remember last state)
Enumerationr/w
Enumerated Values:
0off
1on
2laststate
 .1.3.6.1.4.1.28507.1.1.2.2.1.5
epc8PortStartupDelay
Delay in sec for startup action
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.1.1.2.2.1.6
epc8PortRepowerTime
Delay in sec for repower port after switching off
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.28507.1.1.2.2.1.7

epc8SensorTable

table
.1.3.6.1.4.1.28507.1.1.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk epc8SensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC8X-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC8X-MIB::epc8SensorTable'
epc8SensorEntry row .1.3.6.1.4.1.28507.1.1.3.2.1
Indexes
Column Syntax OID
epc8SensorIndex
 Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.28507.1.1.3.2.1.1
epc8TempSensor
actual temperature, a value of -9999 indicates
that data is not available
10th of degree CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.1.1.3.2.1.2
epc8HygroSensor
actual humidity, a value of -9999 indicates
that data is not available
10th of percentage humiditySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.1.1.3.2.1.3