GUDEADS-EPC2X6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

epc2x6TrapIPTable

table
.1.3.6.1.4.1.28507.6.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk epc2x6TrapIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC2X6-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC2X6-MIB::epc2x6TrapIPTable' 
list of all Trap receiver
epc2x6TrapIPEntry row .1.3.6.1.4.1.28507.6.1.1.2.1
an entry containing management
informations regarding the list of trap
receivers
Indexes
Column Syntax OID
epc2x6TrapIPIndex
A unique value, greater than zero, for each receiver slot.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.28507.6.1.1.2.1.1
epc2x6TrapIPAddr
IP Address specifying one Trap receiver slot.
A value of '00000000'H disables this slot.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.28507.6.1.1.2.1.2
epc2x6TrapIPPort
IP Port specifying one Trap receiver slot.
A value of 0 disables this slot.
Integer32r/w
Constraints:
range: 0-1024
 .1.3.6.1.4.1.28507.6.1.1.2.1.3

epc2x6portTable

table
.1.3.6.1.4.1.28507.6.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the gude variant from /opt/observium/mibs/gude.
Command help
Walk epc2x6portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC2X6-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC2X6-MIB::epc2x6portTable' 
list of all EPC Powerports
epc2x6portEntry row .1.3.6.1.4.1.28507.6.1.2.2.1
An entry containing management information applicable to a
particular powerport.
Indexes
Column Syntax OID
epc2x6PortIndex
A unique value, greater than zero, for each PowerPort.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.28507.6.1.2.2.1.1
epc2x6PortName
A textual string containing name of a PowerPort.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.28507.6.1.2.2.1.2
epc2x6PortState
current state a PowerPort
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.28507.6.1.2.2.1.3
epc2x6PortSwitchCount
The total number of switch actions ocurred on a PowerPort.
Does not count switch commands which will not switch
the ralay state, so just real relay switches are displayed here.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.28507.6.1.2.2.1.4
epc2x6PortStartupMode
set Mode of startup sequence (off, on , remember last state)
Enumerationr/w
Enumerated Values:
0off
1on
2laststate
 .1.3.6.1.4.1.28507.6.1.2.2.1.5
epc2x6PortStartupDelay
Delay in sec for startup action
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.28507.6.1.2.2.1.6
epc2x6PortRepowerTime
Delay in sec for repower port after switching off
secondsInteger32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.28507.6.1.2.2.1.7