GUDEADS-EPC1292-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
41
epc1292TrapIPTable
table.1.3.6.1.4.1.28507.50.1.1.1.2
·
1 row entry
·
2 columns
Uses the gude variant from
Command help
/opt/observium/mibs/gude.
Walk epc1292TrapIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC1292-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC1292-MIB::epc1292TrapIPTable'
list of all Trap receiver
an entry containing management
informations regarding the list of trap
receivers
informations regarding the list of trap
receivers
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
A unique value, greater than zero, for each receiver slot.
|
Integer32 | .1.3.6.1.4.1.28507.50.1.1.1.2.1.1 |
|
DNS name or IP address specifying one Trap receiver slot.
A port can optionally be specified: 'name:port' An empty string disables this slot. |
OctetStringr/w | .1.3.6.1.4.1.28507.50.1.1.1.2.1.2 |
epc1292portTable
table.1.3.6.1.4.1.28507.50.1.3.1.2
·
1 row entry
·
7 columns
Uses the gude variant from
Command help
/opt/observium/mibs/gude.
Walk epc1292portTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC1292-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC1292-MIB::epc1292portTable'
list of all EPC Relay Ports
An entry containing management information applicable to a
particular relay port.
particular relay port.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
A unique value, greater than zero, for each Relay Port.
|
Integer32 | .1.3.6.1.4.1.28507.50.1.3.1.2.1.1 |
|
A textual string containing name of a Relay Port.
|
OctetStringr/w | .1.3.6.1.4.1.28507.50.1.3.1.2.1.2 |
|
current state of a Relay Port
|
Enumerationr/w | .1.3.6.1.4.1.28507.50.1.3.1.2.1.3 |
|
The total number of switch actions ocurred on a Relay Port.
Does not count switch commands which will not switch the ralay state, so just real relay switches are displayed here. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.3.1.2.1.4 |
|
set Mode of startup sequence (off, on , remember last state)
|
Enumerationr/w | .1.3.6.1.4.1.28507.50.1.3.1.2.1.5 |
|
Delay in sec for startup action
|
secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.3.1.2.1.6 |
|
Delay in sec for repower port after switching off
|
secondsInteger32r/w | .1.3.6.1.4.1.28507.50.1.3.1.2.1.7 |
epc1292PowerTable
table.1.3.6.1.4.1.28507.50.1.5.1.2
·
1 row entry
·
23 columns
Uses the gude variant from
Command help
/opt/observium/mibs/gude.
Walk epc1292PowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC1292-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC1292-MIB::epc1292PowerTable'
All available Channel Interfaces.
An entry containing management information
applicable to a particular Power Channel.
applicable to a particular Power Channel.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
Index of Power Channel entries
|
Integer32 | .1.3.6.1.4.1.28507.50.1.5.1.2.1.1 |
|
0 = data not active, 1 = data valid
|
Integer32 | .1.3.6.1.4.1.28507.50.1.5.1.2.1.2 |
|
Absolute Active Energy counter.
|
WhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.3 |
|
Active Power
|
WSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.4 |
|
Actual Curent on Power Channel.
|
mASNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.5 |
|
Actual Voltage on Power Channel
|
VSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.6 |
|
Frequency of Power Channel
|
0.01 hzSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.7 |
|
Power Factor of Channel between
-1.0 and 1.00 |
0.001SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.8 |
|
Phase Angle between Voltage
and L Line Current between -180.0 and 180.0 |
0.1 degreeSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.9 |
|
L Line Mean Apparent Power
|
VASNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.10 |
|
L Line Mean Reactive Power
|
VARSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.11 |
|
Absolute Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.12 |
|
Resettable Absolute Active Energy counter.
Writing '0' resets all resettable counter. |
WhSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.13 |
|
Resettable Absolute Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.14 |
|
Time in seconds since last Energy
Counter reset. |
sSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.15 |
|
Forward Active Energy counter.
|
WhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.16 |
|
Forward Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.17 |
|
Resettable Forward Active Energy counter.
|
WhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.18 |
|
Resettable Forward Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.19 |
|
Reverse Active Energy counter.
|
WhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.20 |
|
Reverse Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.21 |
|
Resettable Reverse Active Energy counter.
|
WhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.22 |
|
Resettable Reverse Reactive Energy counter.
|
VARhSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.28507.50.1.5.1.2.1.23 |
epc1292OVPTable
table.1.3.6.1.4.1.28507.50.1.5.2
·
1 row entry
·
2 columns
Uses the gude variant from
Command help
/opt/observium/mibs/gude.
Walk epc1292OVPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC1292-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC1292-MIB::epc1292OVPTable'
Overvoltage Protection Table
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| Integer32 | .1.3.6.1.4.1.28507.50.1.5.2.1.1 |
|
|
shows the status of the
built-in Overvoltage Protection |
Enumeration | .1.3.6.1.4.1.28507.50.1.5.2.1.2 |
epc1292SensorTable
table.1.3.6.1.4.1.28507.50.1.6.1
·
1 row entry
·
7 columns
Uses the gude variant from
Command help
/opt/observium/mibs/gude.
Walk epc1292SensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GUDEADS-EPC1292-MIB' -M '/opt/observium/mibs/gude:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GUDEADS-EPC1292-MIB::epc1292SensorTable'
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| Integer32 | .1.3.6.1.4.1.28507.50.1.6.1.1.1 |
|
|
actual temperature
|
0.1 degree CelsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.6.1.1.2 |
|
actual humidity
|
0.1 percent humiditySNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.6.1.1.3 |
|
logical state of input sensor
|
Enumeration | .1.3.6.1.4.1.28507.50.1.6.1.1.4 |
|
actual air pressure
|
1 hPA (hectopascal) ~ 1 milibarSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.6.1.1.5 |
|
dew point for actual temperature and humidity
|
0.1 degree CelsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.6.1.1.6 |
|
difference between dew point and actual
temperature (Temp - DewPoint) |
0.1 degree CelsiusSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.28507.50.1.6.1.1.7 |