GSWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

nbsPortsContTable

table mandatory

.1.3.6.1.4.1.629.2.5.1 · 1 row entry · 9 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsPortsContTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsPortsContTable'

A list of the port counters entries

nbsPortsContEntry row .1.3.6.1.4.1.629.2.5.1.1

Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex1

Column Syntax OID

nbsPortIndex1mandatory

The port# from 1 to nbsNPorts1

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.5.1.1.1

nbsPortEnablemandatory

Port Enable.
1 - Port is enabled
2 - Port is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.629.2.5.1.1.2

nbsPortDuplexmandatory

Half/Full Duplex.
1 - Port works in Half-Duplex mode
2 - Port works in Full-Duplex mode

Enumerationr/w

Enumerated Values:

1	half
2	full

.1.3.6.1.4.1.629.2.5.1.1.3

nbsPortMonitormandatory

Monitoring Mode.
1 - Port works in normal mode
2 - Port is set as Sniffer port (monitor mode) were all recived
and transmit packats from all ports are sent to the Sniffer port

Enumerationr/w

Enumerated Values:

1	normal
2	sniffer

.1.3.6.1.4.1.629.2.5.1.1.5

nbsPortPolDetectionmandatory

Auto-Polarity Disable.
Enable/Disable Auto-Polarity detection function
1 - Disable
2 - Enable

Enumerationr/w

Enumerated Values:

1	enable
2	disabel

.1.3.6.1.4.1.629.2.5.1.1.6

nbsPortBroadcastmandatory

Filter Broadcast.
1 - Broadcast packats are forwarded to all ports.
2 - The Switch-G discards Broadcast packats

Enumerationr/w

Enumerated Values:

1	forward
2	discard

.1.3.6.1.4.1.629.2.5.1.1.7

nbsPortForwardUnkmandatory

Forward Unknown.
1 - Unknown packats are forwarded.
2 - The Switch-G does not forward unknown packats
to this port

Enumerationr/w

Enumerated Values:

1	forward
2	discard

.1.3.6.1.4.1.629.2.5.1.1.8

nbsPortSpaningmandatory

Spaning Tree Enable.
Meaniningful only when Spaning Tree for the switch is set
(nbsSpanningTree) is set.
1 - All packets are accepted.
2 - The Switch-G discards all incoming/outgoing packets
except for BPDU packets

Enumerationr/w

Enumerated Values:

1	accept
2	discard

.1.3.6.1.4.1.629.2.5.1.1.9

nbsPortSpeedmandatory

Ports Speed.
Meaningfull only for ports that support both 10 and 100
MBps speeds.
1 - Only for Uplink Ports: Switch-G - Ports ## 27,28
Switch-G - Ports ## 17,18
2 - After reset the port will operate in 10 MBp…

Enumerationr/w

Enumerated Values:

1	none
2	s10MBps
3	s100MBps
4	s1000MBps
5	s10000MBps

.1.3.6.1.4.1.629.2.5.1.1.10

nbsPortsStatTable

table mandatory

.1.3.6.1.4.1.629.2.6.1 · 1 row entry · 4 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsPortsStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsPortsStatTable'

A list of all the port status objects

nbsPortsStatEntry row .1.3.6.1.4.1.629.2.6.1.1

The ports status information.
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex

Column Syntax OID

nbsPortIndexmandatory

The port# from 1 to nbsNPorts1

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.6.1.1.1

nbsPortTypemandatory

Port Type

Enumeration

Enumerated Values:

1	empty
2	normal
3	fastCopper
4	fastFiber
5	slowFiber
6	gigaCopper

.1.3.6.1.4.1.629.2.6.1.1.2

nbsPartitionmandatory

Ports Partition.
Indicates the ports Partition status.
1 - No Partition (Normal mode)
2 - Partition

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.629.2.6.1.1.3

nbsLinkTestmandatory

Ports Link Test Fail.
Indicates the ports Link Test status
1 - Link Test Pass
2 - Link Test Fail

Enumeration

Enumerated Values:

1	pass
2	fail

.1.3.6.1.4.1.629.2.6.1.1.4

nbsPortsCountTable

table mandatory

.1.3.6.1.4.1.629.2.7.1 · 1 row entry · 16 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsPortsCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsPortsCountTable'

A list of the port counters entries

nbsPortsCountEntry row .1.3.6.1.4.1.629.2.7.1.1

Contains the information necessary to configure/describe a
port configuration. The number of rows/entries is fixed. A
row/entry may not be created or deleted

Indexes

nbsPortIndex2

Column	Syntax	OID
nbsPortIndex2mandatory The port# from 1 to nbsNPorts1	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.7.1.1.1`
nbsPortByteRecmandatory Good Bytes Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.2`
nbsPortMulByteRecmandatory Good Multicast Bytes Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.3`
nbsPortBroadByteRecmandatory Good Broadcast Bytes Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.4`
nbsPortByteSentmandatory Good Bytes Sent	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.5`
nbsPortFramesRecmandatory Good Frames Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.6`
nbsPortMulFramesRecmandatory Good Multicast Frames Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.7`
nbsPortBroadFramesRecmandatory Broadcast Frames Recived	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.8`
nbsPortFramesSentmandatory Frames Sent	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.9`
nbsPortCollisionsmandatory Recive and Transmit Collision	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.10`
nbsPortLateCollmandatory Recive and Transmit Late Collision	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.11`
nbsPortCRCAligErrmandatory Recive CRC or Alignment Error	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.12`
nbsPortFramesShortmandatory Recive Frames	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.13`
nbsPortFrameLongmandatory Recive Frames > 1518 bytes with Good CRC	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.14`
nbsPortJabbermandatory Recive Frames > 1518 bytes with Bad CRC	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.15`
nbsPortBadByteRecmandatory Bad Bytes Recived. Bytes with CRC errors and frame too long	RFC1155-SMICounter Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.629.2.7.1.1.16`

nbsMACAddrTable

table mandatory

.1.3.6.1.4.1.629.2.8.1 · 1 row entry · 5 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsMACAddrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsMACAddrTable'

The DRAM address table contains all the MAC addresses
up to 8K records.

nbsMACAddrEntry row .1.3.6.1.4.1.629.2.8.1.1

The entries (records)

Indexes

nbsAddrIndex

Column Syntax OID

nbsAddrIndexmandatory

An index from 1 to 8K. * (number of devices+1)

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.8.1.1.1

nbsMACAddressmandatory

The MAC Address where the packet came from

OctetStringr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.629.2.8.1.1.3

nbsAddrPortmandatory

The source port in this device

Integer32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.8.1.1.4

nbsAddrStaticmandatory

Static indecation bit in the MAC Address entry

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.629.2.8.1.1.5

nbsAddrForwardTomandatory

This indicates whether to forward frames destined
to this MAC address to all ports or only to the
destination port

Enumerationr/w

Enumerated Values:

1	destination-port
2	all-ports

.1.3.6.1.4.1.629.2.8.1.1.6

nbsCardsTable

table mandatory

.1.3.6.1.4.1.629.2.9.1 · 1 row entry · 2 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsCardsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsCardsTable'

define the Cards' Types 
(for NH5500 and other GSWITCH HUBS..).

nbsCardsEntry row .1.3.6.1.4.1.629.2.9.1.1

The entries (records)

Indexes

nbsAddrIndex

Column Syntax OID

nbsCardIndexmandatory

The slot#. An index from 1 to The number of slots.

Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.629.2.9.1.1.1

nbsCardTypemandatory

The Card's type:
copper20Ethernet10or100Base (2) - Slot including 20 fast copper 10/100 MBps Ports;
copper40Ethernet10Base (3) - Slot including 40 normal copper 10 MBps Ports;
fibre10Ethernet100Base (6) - Sl…

Enumeration

Enumerated Values:

1	emptySlot
2	copper20Ethernet10or100Base
3	copper40Ethernet10Base
4	powerSupplyError
5	powerSupplyOK
6	fibre10Ethernet100Base
7	fansUnitError
8	fansUnitOK
9	universal

.1.3.6.1.4.1.629.2.9.1.1.2

nbsPALPortsTable

table mandatory

.1.3.6.1.4.1.629.2.12.1 · 1 row entry · 2 columns

Open in standard view

Uses the mrv variant from /opt/observium/mibs/mrv.

Command help

Walk nbsPALPortsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GSWITCH-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GSWITCH-MIB::nbsPALPortsTable'

Table contain data only for
the existing PAL modules ports.

nbsPALPortsEntry row .1.3.6.1.4.1.629.2.12.1.1

The PAL Optic Power Ports status.

Indexes

nbsPALPortIndex

Column	Syntax	OID
nbsPALPortIndexmandatory The number of the real existing PAL port. (the same as [ifIndex] in the MIB-II).	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.12.1.1.1`
nbsPALPortOpticPowermandatory PAL Port Optic Power status. (interval: 0 - 15)	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.629.2.12.1.1.2`