GENERIC-3COM-VLAN-MIB-1-0-1 Table View

This table lists VLAN interfaces that are globally
identified.  A single entry exists in this list for each
VLAN interface in the system that is bound to a global
identifier.

a3ComVlanGlobalMappingEntry row .1.3.6.1.4.1.43.10.1.14.1.1.1

An individual VLAN interface global mapping entry.
Entries in this table are created by setting the
a3ComVlanIfGlobalIdentifier object in the
a3ComVlanIfTable to a non-zero value.

Indexes

a3ComVlanGlobalMappingIdentifier

Column	Syntax	OID
a3ComVlanGlobalMappingIdentifiermandatory An index into the a3ComVlanGlobalMappingTable and an administratively assigned global VLAN identifier. The value of this object globally identifies the VLAN interface. For VLAN interfaces, on different network devices,…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.43.10.1.14.1.1.1.1
a3ComVlanGlobalMappingIfIndexmandatory The value of a3ComVlanIfIndex for the VLAN interface in the a3ComVlanIfTable, which is bound to the global identifier specified by this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.10.1.14.1.1.1.2

This table lists VLAN interfaces that exist within
a device.  A single entry exists in this list for each
VLAN interface in the system.  A VLAN interface may
be created, destroyed and/or mapped to a globally 
identified vlan.

a3ComVlanIfEntry row .1.3.6.1.4.1.43.10.1.14.1.2.1

An individual VLAN interface entry. When an NMS wishes
to create a new entry in this table, it must obtain a
non-zero index from the a3ComNextAvailableVirtIfIndex
object. Row creation in this table will fail if the
c…

Indexes

a3ComVlanIfIndex

Column	Syntax	OID
a3ComVlanIfIndexmandatory The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the a3ComNextAvailableVirtIfIndex object.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.10.1.14.1.2.1.1
a3ComVlanIfDescrmandatory This is a description of the VLAN interface.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.43.10.1.14.1.2.1.2
a3ComVlanIfTypemandatory The VLAN interface type.	A3ComVlanTyper/w Type Values: 1 vlanLayer2 2 vlanDefaultProtocols 3 vlanIPProtocol 4 vlanIPXProtocol 5 vlanAppleTalkProtocol 6 vlanXNSProtocol 7 vlanISOProtocol 8 vlanDECNetProtocol 9 vlanNetBIOSProtocol 10 vlanSNAProtocol 11 vlanVINESProtocol 12 vlanX25Protocol 13 vlanIGMPProtocol 14 vlanSessionLayer 15 vlanNetBeui	.1.3.6.1.4.1.43.10.1.14.1.2.1.3
a3ComVlanIfGlobalIdentifiermandatory An administratively assigned global VLAN identifier. For VLAN interfaces, on different network devices, which are part of the same globally identified VLAN, the value of this object will be the same. T…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.10.1.14.1.2.1.4
a3ComVlanIfInfomandatory A TLV encoded information string for the VLAN interface. The information contained within this string corresponds to VLAN information not contained within this table, but contained elsewhere within this MIB module. The…	OctetString	.1.3.6.1.4.1.43.10.1.14.1.2.1.5
a3ComVlanIfStatusmandatory The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInServ…	RowStatusr/w Type Constraints: range: 1..6	.1.3.6.1.4.1.43.10.1.14.1.2.1.6
a3ComVlanIfIgnoreStpFlagmandatory Enable/disable STP for this VLAN interface. Setting this object to true will cause the ports on this VLAN to ignore STP BPDUs. When a vlan is first created, the Default value is FALSE, which means that the VLAN uses ST…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.10.1.14.1.2.1.7

A list of IP VLAN interface information
entries.  Entries in this table are related
to entries in the a3ComVlanIfTable by using the
same index.

a3ComIpVlanEntry row .1.3.6.1.4.1.43.10.1.14.2.1.1

A a3ComIpVlanEntry contains layer 3
information about a particular IP VLAN
interface. Note entries in this table
cannot be deleted until the entries in
the ifStackTable that produce overlap
are removed.

Indexes

a3ComVlanIfIndex

Column	Syntax	OID
a3ComIpVlanIpNetAddressmandatory The IP network number for the IP VLAN interface defined in the a3ComVlanIfTable identified with the same index. The IpNetAdress and the IpNetMask must be set and the the row creation process completed by a NMS before ov…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.10.1.14.2.1.1.1
a3ComIpVlanIpNetMaskmandatory The IP network mask corresponding to the IP Network address defined by a3ComIpVlanIpNetAddress. The IpNetAdress and the IpNetMask must be set and the row creation process completed by a NMS before overlapping rows in …	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.10.1.14.2.1.1.2
a3ComIpVlanStatusmandatory The status column for this IP VLAN entry. This object can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active(1) notInSer…	RowStatusr/w Type Constraints: range: 1..6	.1.3.6.1.4.1.43.10.1.14.2.1.1.3

This table lists VLAN encapsulation interfaces that
exist within a device.  A single entry exists in this
list for each VLAN encapsulation interface in the
system.  A VLAN encapsulation interface may be created
or destroyed.

a3ComVlanEncapsIfEntry row .1.3.6.1.4.1.43.10.1.14.4.1.1

An individual VLAN encapsulation interface entry.
When an NMS wishes to create a new entry in this table,
it must obtain a non-zero index from the
a3ComNextAvailableVirtIfIndex object. Row creation in
this table will …

Indexes

a3ComVlanEncapsIfIndex

Column	Syntax	OID
a3ComVlanEncapsIfIndexmandatory The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by reading the a3ComNextAvailableVirtIfIndex object.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.10.1.14.4.1.1.1
a3ComVlanEncapsIfTypemandatory The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.	A3ComVlanEncapsTyper/w Type Values: 1 vlanEncaps3ComProprietaryPDD 2 vlanEncaps8021q 3 vlanEncapsPre8021qONcore	.1.3.6.1.4.1.43.10.1.14.4.1.1.2
a3ComVlanEncapsIfTagmandatory The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.10.1.14.4.1.1.3
a3ComVlanEncapsIfStatusmandatory The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: …	RowStatusr/w Type Constraints: range: 1..6	.1.3.6.1.4.1.43.10.1.14.4.1.1.4