GALILEO-MIB Table View

Indecate the instance of the fcog for hash_fnc calc per group type

rlPolicyGalileoDebugFcogEntry row .1.3.6.1.4.1.89.56.7.1.1

the entry per groupType indicate the offsets for hash_func calc.

Indexes

rlPolicyGalileoDebugFcogType

Column	Syntax	OID
rlPolicyGalileoDebugFcogType Specifies a the Group type for which Fcog bytes specified.	RlPolicyGalileoDebugGroupType Type Values: 1 bridged 2 routedIp 3 routedIpx	.1.3.6.1.4.1.89.56.7.1.1.1
rlPolicyGalileoDebugL2SrcAddr indecate if the L2 SrcAddr defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.2
rlPolicyGalileoDebugL2DstAddr indecate if the L2DstAddr defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.3
rlPolicyGalileoDebugVlanId indecate if the VlanId defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.4
rlPolicyGalileoDebugInport indecate if the Inport defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.5
rlPolicyGalileoDebugIpxDstNet indecate if the IpxDstNet defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.6
rlPolicyGalileoDebugIpxDstNode indecate if the IpxDstNode defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.7
rlPolicyGalileoDebugIpSrcAddr indecate if the IpSrcAddr defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.8
rlPolicyGalileoDebugIpDstAddr indecate if the IpDstAddr defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.9
rlPolicyGalileoDebugIpProtocol indecate if the IpProtocol defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.10
rlPolicyGalileoDebugIpSrcPort indecate if the IpSrcPort defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.11
rlPolicyGalileoDebugIpDstPort indecate if the IpDstPort defined for fcog.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.1.1.12
rlPolicyGalileoDebugStatus The status of a table entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.56.7.1.1.13

This table will allow us to request variables from specific entry at the
flowTable. only get and getNext will be supported (getNext will return alyaws
EndOfMibTable)

rlPolicyGalileoDebugFlowTableEntry row .1.3.6.1.4.1.89.56.7.2.1

all the input fileds has a default val except from the groupType, request of an entry
should be based on the fcog definition.

Indexes

rlPolicyGalileoDebugFlowType rlPolicyGalileoDebugFlowRxIfIndex rlPolicyGalileoDebugFlowL2SrcAddr rlPolicyGalileoDebugFlowL2DstAddr rlPolicyGalileoDebugFlowVlanId rlPolicyGalileoDebugFlowIpxDstNet rlPolicyGalileoDebugFlowIpxDstNode rlPolicyGalileoDebugFlowIpSrcAddr rlPolicyGalileoDebugFlowIpDstAddr rlPolicyGalileoDebugFlowIpProtocol rlPolicyGalileoDebugFlowIpSrcPort rlPolicyGalileoDebugFlowIpDstPort

Column	Syntax	OID
rlPolicyGalileoDebugFlowType Specifies a the Group type.	RlPolicyGalileoDebugGroupType Type Values: 1 bridged 2 routedIp 3 routedIpx	.1.3.6.1.4.1.89.56.7.2.1.1
rlPolicyGalileoDebugFlowRxIfIndex Specifies a the IfIndex the packet arrived (for the calculation of the relevant cosTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.2
rlPolicyGalileoDebugFlowL2SrcAddr Indicate the L2SrcAddr for the requsted entry.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.89.56.7.2.1.3
rlPolicyGalileoDebugFlowL2DstAddr Indicate the L2DstAddr for the requsted entry.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.89.56.7.2.1.4
rlPolicyGalileoDebugFlowVlanId Indicate the VlanId for the requsted entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.5
rlPolicyGalileoDebugFlowIpxDstNet Indicate the IPX DstNet for the requsted entry.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.89.56.7.2.1.6
rlPolicyGalileoDebugFlowIpxDstNode Indicate the IPX DstNode for the requsted entry.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.89.56.7.2.1.7
rlPolicyGalileoDebugFlowIpSrcAddr Indicate the IP SrcAddr for the requsted entry.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.89.56.7.2.1.8
rlPolicyGalileoDebugFlowIpDstAddr Indicate the IP DstAddr for the requsted entry.	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.89.56.7.2.1.9
rlPolicyGalileoDebugFlowIpProtocol Indicate the IP Protocol for the requsted entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.10
rlPolicyGalileoDebugFlowIpSrcPort Indicate the IP SrcPort for the requsted entry.	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.89.56.7.2.1.11
rlPolicyGalileoDebugFlowIpDstPort Indicate the IP DstPort for the requsted entry.	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.89.56.7.2.1.12
rlPolicyGalileoDebugFlowRetValid Indicate if the requsted entry is valid (exist) or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.2.1.13
rlPolicyGalileoDebugFlowRetStatic Indicate if the requsted entry is a static entry or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.2.1.14
rlPolicyGalileoDebugFlowRetAging Indicate if the Aging bit of the requested entry is set or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.2.1.15
rlPolicyGalileoDebugFlowRetCmd Indicate if the CMD of the requested entry .	Enumeration Enumerated Values: 1 drop 2 dropAndTrap 3 permit 4 permitAndTrap	.1.3.6.1.4.1.89.56.7.2.1.16
rlPolicyGalileoDebugFlowRetPrio Indicate if the Pri/Sc of the requested entry .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.17
rlPolicyGalileoDebugFlowRetInProfileDis Indicate if the inProfile Discardability of the requested entry .	Enumeration Enumerated Values: 1 low 2 high 3 drop	.1.3.6.1.4.1.89.56.7.2.1.18
rlPolicyGalileoDebugFlowRetVpt Indicate if the Vpt of the requested entry .	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.19
rlPolicyGalileoDebugFlowRetChangeTos Indicate if the Change Tos of the requested entry is set or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.2.1.20
rlPolicyGalileoDebugFlowRetNewTos Indicate if the New Tos of the requested entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.21
rlPolicyGalileoDebugFlowRetVlanId Indicate if the VlanId of the requested entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.22
rlPolicyGalileoDebugFlowRetInIfIndex Indicate if the InIfindex of the requested entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.56.7.2.1.23
rlPolicyGalileoDebugFlowRetEnableMeter Indicate if Meter of the requested entry is enbled or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.7.2.1.24
rlPolicyGalileoDebugFlowRetOutProfileDis Indicate the outProfile Discardability of the requested entry .	Enumeration Enumerated Values: 1 low 2 high 3 drop	.1.3.6.1.4.1.89.56.7.2.1.25

The table defines all the profiles.

rlPolicySimpleGalMibProfileEntry row .1.3.6.1.4.1.89.56.9.5.1

The entry define one profile.

Indexes

rlPolicySimpleGalMibIndex

Column	Syntax	OID
rlPolicySimpleGalMibIndex This enumerates the table entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.5.1.1
rlPolicySimpleGalMibDescription Informational text given by the user to describe the profile.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.56.9.5.1.2
rlPolicySimpleGalMibProfileType Specifies a profile type.	RlPolicySimpleGalMibProfileTyper/w Type Values: 1 minBandwidth 2 bandwidthGuarantee 3 minDelay 4 minDelayPerSession	.1.3.6.1.4.1.89.56.9.5.1.3
rlPolicySimpleGalMibRate The rate in kilobytes/second for the specified profile, or in the case of minDelay per session profile type the rate will indicate the rate per individual session	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.5.1.4
rlPolicySimpleGalMibBurstSize The burst size parameter. A value of 0 means that the device should choose the Burst Size that is most suitable for the profile.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.56.9.5.1.5
rlPolicySimpleGalMibMaxSession Relevant only for the minDelay per session. Indicate the maximum number of sessions for this profile.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.5.1.6
rlPolicySimpleGalMibNewVpt Indicates the new VPT to assign to the packet.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.56.9.5.1.7
rlPolicySimpleGalMibChangeTosOrDscp Indicates whether the TOS or DSCP should be remarked with a new value	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.5.1.8
rlPolicySimpleGalMibNewTosOrDscp Indicates the new value for the TOS or DSCP. Relevant only if rlPolicySimpleGalMibChangeTosOrDscp is true.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.56.9.5.1.9
rlPolicySimpleGalMibStatus The status of a table entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.56.9.5.1.10

This table defines the used fields for ip classification,
per port type (interior/boundary)

rlPolicySimpleGalMibIpFcogEntry row .1.3.6.1.4.1.89.56.9.6.1

the entry define the used fields for classification

Indexes

rlPolicySimpleGalMibIpFcogPortType

Column	Syntax	OID
rlPolicySimpleGalMibIpFcogPortType The port type (interior/boundary) to which this entry applies.	RlPolicySimpleGalMibPortType Type Values: 1 boundary 2 interior	.1.3.6.1.4.1.89.56.9.6.1.1
rlPolicySimpleGalMibIpFcogTosOrDscp Indicates whether the IP TOS or DSCP field will be used in classifiers or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.6.1.2
rlPolicySimpleGalMibIpFcogProtocol Indicates whether the IP L4 protocol field will be used in classifiers or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.6.1.3
rlPolicySimpleGalMibIpFcogSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.6.1.4
rlPolicySimpleGalMibIpFcogDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.6.1.5
rlPolicySimpleGalMibIpFcogSrcPort Indicates whether the IP L4 protocol source port field will be used in classifiers or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.6.1.6
rlPolicySimpleGalMibIpFcogDstPort Indicates whether the IP L4 protocol destination port field will be used in classifiers or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.6.1.7
rlPolicySimpleGalMibIpFcogInIfIndex Indicates whether ifIndex of input ports will be used in classifiers or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.6.1.8

This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
applies to the incoming packet will be acted upon, ignoring any
further rules that may apply as well.

rlPolicySimpleGalMibIpRulesEntry row .1.3.6.1.4.1.89.56.9.7.1

This entry defines one policy rule.

Indexes

rlPolicySimpleGalMibIpRulesPortType rlPolicySimpleGalMibIpRulesIndex

Column	Syntax	OID
rlPolicySimpleGalMibIpRulesPortType The port type (interior/boundary) to which this rule applies.	RlPolicySimpleGalMibPortType Type Values: 1 boundary 2 interior	.1.3.6.1.4.1.89.56.9.7.1.1
rlPolicySimpleGalMibIpRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.7.1.2
rlPolicySimpleGalMibIpRulesDescription Informational text given by the user to describe the rule.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.56.9.7.1.3
rlPolicySimpleGalMibIpRulesTosOrDscp Indicates the TOS or DSCP to compare with.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.56.9.7.1.4
rlPolicySimpleGalMibIpRulesProtocol Indicates the L4 protocol to compare with.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.56.9.7.1.5
rlPolicySimpleGalMibIpRulesSrcIp Indicates the source IP address to compare with.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.56.9.7.1.6
rlPolicySimpleGalMibIpRulesSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.7.1.7
rlPolicySimpleGalMibIpRulesDstIp Indicates the destination IP address to compare with.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.56.9.7.1.8
rlPolicySimpleGalMibIpRulesDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.7.1.9
rlPolicySimpleGalMibIpRulesSrcPort Indicates the source L4 port to compare with.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.7.1.10
rlPolicySimpleGalMibIpRulesDstPort Indicates the destination L4 port to compare with.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.7.1.11
rlPolicySimpleGalMibIpRulesInIfIndexList Indicates the list of input ports to which this rule applies.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.7.1.12
rlPolicySimpleGalMibIpRulesCondition Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field.	Enumerationr/w Enumerated Values: 1 equal 2 notEqual 3 bigger 4 smaller	.1.3.6.1.4.1.89.56.9.7.1.13
rlPolicySimpleGalMibIpRulesAction Indicates the action to be performed if there is a match with the rule.	Enumerationr/w Enumerated Values: 1 block 2 blockAndTrap 3 permitAndTrap 4 permit	.1.3.6.1.4.1.89.56.9.7.1.14
rlPolicySimpleGalMibIpRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.56.9.7.1.15
rlPolicySimpleGalMibIpRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be allocated for this rule.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.7.1.16
rlPolicySimpleGalMibIpRulesBitsUsed a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- |87654321| ---------- 8 - tosOrDscp 7 - Protocol 6 - SrcIp 5 - DstIp …	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.89.56.9.7.1.17
rlPolicySimpleGalMibIpRulesErrorDescrip A description error indicate the user about the specific error. The error can cause by one of the following reasons: 1. if the profile was asign to the rule could not be perform 2. if the operation of QoS portLock failed	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.89.56.9.7.1.18
rlPolicySimpleGalMibIpRulesStatus The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some port…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.56.9.7.1.19

This table defines the used fields for ipx classification

rlPolicySimpleGalMibIpxFcogEntry row .1.3.6.1.4.1.89.56.9.8.1

the entry defines the used fields for classification

Indexes

rlPolicySimpleGalMibIpxFcogIndex

Column	Syntax	OID
rlPolicySimpleGalMibIpxFcogIndex the table index - only one entry exist	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.89.56.9.8.1.1
rlPolicySimpleGalMibIpxFcogDstNet Indicates the parts of the field in use in the rules	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.89.56.9.8.1.2
rlPolicySimpleGalMibIpxFcogDstNode Indicates the parts of the field in use in the rules	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.8.1.3
rlPolicySimpleGalMibIpxFcogDstSocket Indicates whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.8.1.4
rlPolicySimpleGalMibIpxFcogSrcNet Indicates the parts of the field in use in the rules	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.89.56.9.8.1.5
rlPolicySimpleGalMibIpxFcogSrcNode Indicates the parts of the field in use in the rules	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.8.1.6
rlPolicySimpleGalMibIpxFcogSrcSocket Indicates whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.8.1.7
rlPolicySimpleGalMibIpxFcogInIfIndex Indicates whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.8.1.8

This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
matches the incoming packet will be acted upon, ignoring any
further rules that may match as well.

rlPolicySimpleGalMibIpxRulesEntry row .1.3.6.1.4.1.89.56.9.9.1

This entry defines one policy rule.

Indexes

rlPolicySimpleGalMibIpxRulesIndex

Column	Syntax	OID
rlPolicySimpleGalMibIpxRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.9.1.1
rlPolicySimpleGalMibIpxRulesDescription Informational text given by the user to describe the rule.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.56.9.9.1.2
rlPolicySimpleGalMibIpxRulesDstNet Indicate the ipxDst Net to compare to	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.89.56.9.9.1.3
rlPolicySimpleGalMibIpxRulesDstNode Indicate the ipxDstNode to compare to	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.9.1.4
rlPolicySimpleGalMibIpxRulesDstSocket Indicate the ipx DstSocket to compare to	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.9.1.5
rlPolicySimpleGalMibIpxRulesSrcNet Indicate the ipxSrc Net to compare to	OctetStringr/w Constraints: range: 0-4	.1.3.6.1.4.1.89.56.9.9.1.6
rlPolicySimpleGalMibIpxRulesSrcNode Indicate the ipxSrcNode to compare to	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.9.1.7
rlPolicySimpleGalMibIpxRulesSrcSocket Indicate the ipx SrcSocket to compare to	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.9.1.8
rlPolicySimpleGalMibIpxRulesInIfIndexList Indicates the list of input ports to which this rule applies.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.9.1.9
rlPolicySimpleGalMibIpxRulesCondition Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's.	Enumerationr/w Enumerated Values: 1 equal 2 notEqual 3 bigger 4 smaller	.1.3.6.1.4.1.89.56.9.9.1.10
rlPolicySimpleGalMibIpxRulesAction Indicates the action to be performed if the rule matches.	Enumerationr/w Enumerated Values: 1 block 2 blockAndTrap 3 permitAndTrap 4 permit	.1.3.6.1.4.1.89.56.9.9.1.11
rlPolicySimpleGalMibIpxRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.56.9.9.1.12
rlPolicySimpleGalMibIpxRulesOutIfIndexList Indicates the list of output ports on which bandwidth should be allocated for this rule.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.9.1.13
rlPolicySimpleGalMibIpxRulesStatus The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some port…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.56.9.9.1.14

The table defines the used fields for Bridge classification

rlPolicySimpleGalMibBridgeFcogEntry row .1.3.6.1.4.1.89.56.9.10.1

the entry defines the used fields for classification

Indexes

rlPolicySimpleGalMibBridgeFcogIndex

Column	Syntax	OID
rlPolicySimpleGalMibBridgeFcogIndex the table index - only one entry exist	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.89.56.9.10.1.1
rlPolicySimpleGalMibBridgeFcogDstMac Indicate the use of the field in the rules	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.10.1.2
rlPolicySimpleGalMibBridgeFcogSrcMac Indicate the use of the field in the rules	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.10.1.3
rlPolicySimpleGalMibBridgeFcogVid Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.4
rlPolicySimpleGalMibBridgeFcogInIfIndex Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.5
rlPolicySimpleGalMibBridgeFcogEthType Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.6
rlPolicySimpleGalMibBridgeFcogIpTosOrDscp Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.7
rlPolicySimpleGalMibBridgeFcogIpProtocol Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.8
rlPolicySimpleGalMibBridgeFcogIpSrcIpMask Indicate the number of used bits of the Ip Address from the left	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.10.1.9
rlPolicySimpleGalMibBridgeFcogIpDstIpMask Indicate the number of used bits of the Ip Address from the left	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.56.9.10.1.10
rlPolicySimpleGalMibBridgeFcogIpSrcPort Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.11
rlPolicySimpleGalMibBridgeFcogIpDstPort Indicate whether the field is in use in the rules	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.56.9.10.1.12

This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
applies to the incoming packet will be acted upon, ignoring any
further rules that may apply as well.

rlPolicySimpleGalMibBridgeRulesEntry row .1.3.6.1.4.1.89.56.9.11.1

This entry defines one policy rule.

Indexes

rlPolicySimpleGalMibBridgeRulesIndex

Column	Syntax	OID
rlPolicySimpleGalMibBridgeRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.11.1.1
rlPolicySimpleGalMibBridgeRulesDescription Informational text given by the user to describe the rule.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.56.9.11.1.2
rlPolicySimpleGalMibBridgeRulesDstMac Indicate the Dst mac to compare	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.11.1.3
rlPolicySimpleGalMibBridgeRulesSrcMac Indicate the source mac to compare	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.56.9.11.1.4
rlPolicySimpleGalMibBridgeRulesVid Indicate the vlanId to compare	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.89.56.9.11.1.5
rlPolicySimpleGalMibBridgeRulesInIfIndexList Indicates the list of input ports to which this rule applies.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.11.1.6
rlPolicySimpleGalMibBridgeRulesEthType Indicate the Ethernet type of the packet	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.11.1.7
rlPolicySimpleGalMibBridgeRulesIpTosOrDscp Indicates the tos or dscp to compare	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.56.9.11.1.8
rlPolicySimpleGalMibBridgeRulesIpProtocol Indicates the protocol to compare	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.56.9.11.1.9
rlPolicySimpleGalMibBridgeRulesIpSrcIp Indicate the srcIp to compare	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.56.9.11.1.10
rlPolicySimpleGalMibBridgeRulesIpDstIp Indicate the DstIp to compare	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.56.9.11.1.11
rlPolicySimpleGalMibBridgeRulesIpSrcPort Indicate the Src port to compare	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.11.1.12
rlPolicySimpleGalMibBridgeRulesIpDstPort Indicate the Src port to compare	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.56.9.11.1.13
rlPolicySimpleGalMibBridgeRulesCondition Indicate the relation that should hold for each relevant field of the rule in comparison to the packet's field.	Enumerationr/w Enumerated Values: 1 equal 2 notEqual 3 bigger 4 smaller	.1.3.6.1.4.1.89.56.9.11.1.14
rlPolicySimpleGalMibBridgeRulesAction Indicates the action to be performed if there is a match with the rule.	Enumerationr/w Enumerated Values: 1 block 2 blockAndTrap 3 permitAndTrap 4 permit	.1.3.6.1.4.1.89.56.9.11.1.15
rlPolicySimpleGalMibBridgeRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.56.9.11.1.16
rlPolicySimpleGalMibBridgeRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be allocated for this rule.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.56.9.11.1.17
rlPolicySimpleGalMibBridgeRulesStatus The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some port…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.56.9.11.1.18

The table defines all of the ports types

rlPolicySimpleGalMibPortEntry row .1.3.6.1.4.1.89.56.9.12.1

An entry defines a port's type

Indexes

rlPolicySimpleGalMibPortIfIndex

Column	Syntax	OID
rlPolicySimpleGalMibPortIfIndex This enumerates the table entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.89.56.9.12.1.1
rlPolicySimpleGalMibPortType Defines the port type	RlPolicySimpleGalMibPortTyper/w Type Values: 1 boundary 2 interior	.1.3.6.1.4.1.89.56.9.12.1.2