G700-MG-MIB Table View

Table of physical media modules in this media gateway.

cmgModuleEntry row .1.3.6.1.4.1.6889.2.9.1.1.11.1.1

An entry in the table, representing a single media module.

Indexes

cmgModuleSlot

Column	Syntax	OID
cmgModuleSlot Slot number of this module.	Integer32 Constraints: range: 1-9	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.1
cmgModuleType Type of this module.	Enumeration Enumerated Values: 1 t1e1-voip 2 bri 3 dcp 4 analog 5 t1e1 6 voip 7 icc 9 fxo4fxs4 10 bri2 11 ds1wan 12 uspwan 13 dcp24hd 14 poe24 16 g350intana 17 dcp24 18 fxs24 19 g250-int-analog-2L4T 20 g250-int-analog-2L1T 21 g250-int-BRI 22 poe40 23 g250-int-12pDCP 24 g250-int-DS1 25 poe24cr 26 poe8 29 g250-int-analog-6L8T 30 tgm550-int-analog-2L2T 31 tim514 32 tim510 33 tim521 34 avayaAM110ApplicationModule 40 g450Mainboard 41 tim508 42 tim516 43 tim518 44 i120-intana 45 i40-int-analog-2L4T 46 i40-int-analog-2L1T 47 i40-int-BRI 48 i40-int-DS1 49 i40-A14-int-analog-6L8T 50 avayaCommunicationManagerBranchEditionG450Mainboard 51 g430Mainboard 52 bri8 253 invalid 255 unknown	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.2
cmgModuleDescription Description of this media module, e.g. 'Avaya E1/T1 media module with integrated CSU/DSU'	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.3
cmgModuleName User-assigned name of this media module.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.4
cmgModuleSerialNumber Serial number of this module. The first 12 characters are meaningful. Form is yyLLmmnnnnnn, where yy = last 2 digits of the year of manufacture LL = manufacturing facility, e.g. DR for Denver, Colorado mm = month of ma…	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.5
cmgModuleHWVintage Hardware vintage of this module.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.6
cmgModuleHWSuffix Hardware vintage suffix of this module.	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.7
cmgModuleFWVersion Firmware version of this module. This duplicates information available in the Load MIB. It shows the media module run image version, plus the VoIP engine version if applicable.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.8
cmgModuleNumberOfPorts Number of physical connectors on this module.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.9
cmgModuleFaultMask Each bit of this value set to '1' indicates a specific fault in the module. Octets are numbered in the order in which they appear in the PDU. Bits are numbered from the most-significant leftmost bit in th…	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.10
cmgModuleStatusMask Each bit of this value set to '1' indicates a specific status condition in the module. Octets are numbered in the order in which they appear in the PDU. Bits are numbered from the most-significant leftmos…	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.11
cmgModuleReset Setting the value of this attribute to ON is interpreted as a reset command for the module. It initiates a complete reinitialization of the module and of all the devices incorporated inside the module.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.12
cmgModuleNumberOfChannels Number of communications channels or spans on this module. Earlier Avaya products have referred to T1E1 channels as ports. This media gateway calls them channels.	Integer32 Constraints: range: 0-64	.1.3.6.1.4.1.6889.2.9.1.1.11.1.1.13

Configuration of E1/T1 DSUs in this media gateway.

cmgDsuConfigEntry row .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1

An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.

Indexes

cmgDsuSlot cmgDsuPort

Column	Syntax	OID
cmgDsuSlotobsolete Slot number of this DSU.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1
cmgDsuPortobsolete Port number of this DSU.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2
cmgDsuPortEnableobsolete This object allows a user to take the E1/T1 port out of service for administration. During administration, it may be in an inconsistent state. When administration is complete, the port may be enabled again. If the po…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3
cmgDsuDataFormatobsolete Data format (channel rate) of this DSU.	Enumerationr/w Enumerated Values: 1 rate56Kbps 2 rate64KbpsClear	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4
cmgDsuFlowControlobsolete Specifies the conditions under which this DSU will send all ones to indicate data port not ready. dtr-rts(1) Monitor both DTR and RTS as described below. If either is interrupted, send all ones. …	Enumerationr/w Enumerated Values: 1 dtr-rts 2 dtr 3 rts 4 disable	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5
cmgDsuYellowAlarmActionobsolete Specifies the action to take when a yellow alarm is received on the network interface. noAction(1) Ignore yellow alarms. halt(2) Stop transmission and disable the data port. Send all ones …	Enumerationr/w Enumerated Values: 1 noAction 2 halt	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6
cmgDsuReceiveClockobsolete Specifies whether data received from the data port is clocked using the DSU internal clock or by an external clock provided by the DTE connected to the port. When an external clock is used, it must be synchronized to t…	Enumerationr/w Enumerated Values: 1 internal 2 external	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7
cmgDsuInvertTxCobsolete Specifies whether the clock supplied by the DSU/CSU on the TXC interchange circuit DB (CCITT 114) is phase inverted with respect to the Transmitted Data interchange ciucuit BA (CCITT 103). This option is useful when lo…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8
cmgDsuInvertRxCobsolete Specifies whether the receive clock supplied by the DSU/CSU or DTE is phase inverted.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9
cmgDsuInvertTxDobsolete Specifies whether the transmitted data stream is logically inverted before being transmitted. This option is useful for applications where HDLC data is being transported. Inverting the data ensures that the density re…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10
cmgDsuInvertRxDobsolete Specifies whether the received data stream is logically inverted. This option is useful for applications where HDLC data is being transported. Inverting the data ensures that the density requirements for the network in…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11
cmgDsuPortInitiatedLoopbackobsolete Specifies whether the DSU should accept loopback requests from the DTE port. The local DTE can send an LL or RL signal to the T1/E1 media module in the EIA-530A interface. The LL signal causes the module to activate a…	Enumerationr/w Enumerated Values: 1 allow 2 disallow	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12
cmgDsuNetworkInitiatedLoopbackobsolete Specifies whether the DSU should accept in-band loopback requests from the far end, that is, a DSU across the network.	Enumerationr/w Enumerated Values: 1 allow 2 disallow	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13
cmgDsuChannelAssignmentsobsolete Specifies which channels are assigned to Voice and which to the DSU. Each bit represents one channel. If the bit is set to 1, the channel is assigned to the DSU; otherwise it is assigned to Voice. The channel number o…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14
cmgDsuDataRateobsolete Data format (channel rate) of this DSU times the number of channels of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable.	Integer32 Constraints: range: 0-2048	.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15

Status of E1/T1 DSUs in this media gateway.

cmgDsuPortStatusEntry row .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1

An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.

Indexes

cmgDsuSlot cmgDsuPort

Column	Syntax	OID
cmgDsuRTSobsolete State of request-to-send signal from the DTE to the DSU.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.1
cmgDsuDTRobsolete State of data-terminal-ready signal from the DTE to the DSU.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.2
cmgDsuLLobsolete Is there a DTE local loopback active between the DTE and the DSU?	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.3
cmgDsuRLobsolete Is there a remote loopback active in the FPGA?	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.4
cmgDsuRLSDobsolete State of the Receive Line Signal Detect from the DSU to the DTE.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.5
cmgDsuCTSobsolete State of clear-to-send signal from the DSU to the DTE.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.6
cmgDsuDSRobsolete State of data-set-ready signal from the DCE to the DTE.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.7
cmgDsuRingobsolete State of the DCE ring indicator signal to the DTE.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.8
cmgDsuTestModeobsolete Indicates whether tests are currently in progress.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.9
cmgDsuTxDobsolete State of data transmission from the synchronous DTE to the data port on the DSU.	Enumeration Enumerated Values: 1 mark 2 space 3 cycling	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.10
cmgDsuRxDobsolete State of data reception at the synchronous DTE from the data port on the DSU/CSU.	Enumeration Enumerated Values: 1 mark 2 space 3 cycling	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.11
cmgDsuFaultMaskobsolete Each bit of this value set to '1' indicates a specific fault in this DSU. Octets are numbered in the order in which they appear in the PDU. Bits are numbered from the most-significant leftmost bit in the …	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12
cmgDsuStatusMaskobsolete Each bit of this value set to '1' indicates a specific status condition in this DSU, or a fault or status condition in its associated CSU. Octets are numbered in the order in which they appear in the PDU.…	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.13

Loopback tests in effect on DSUs in this media gateway.

cmgDsuTestEntry row .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1

An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.

Indexes

cmgDsuSlot cmgDsuPort

Column	Syntax	OID
cmgDsuLoopbackPatternobsolete Specifies the pattern to be sent during a loopback test. allZeroes(1) is most often used to verify B8ZS line encoding. allOnes(2) is most often used to measure signal power. oneZeroOne(3) alternates ones and zeroes. It…	Enumeration Enumerated Values: 1 allZeroes 2 allOnes 3 oneZeroOne 4 oneIn5 5 oneIn8 6 threeIn24 7 qrs 8 qrs511 9 qrs2047 255 none	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.1
cmgDsuLocalDteLoopbackobsolete Indicates whether a Local DTE loopback is active, in which a signal received from the DTE is looped back after passing through the transceivers, but before passing through the FIFOs. This loopback can be activated by th…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.2
cmgDsuNearEndDataChannelLoopbackobsolete Indicates whether a Near-end Data Channel loopback is active, in which a signal received from the CSU is looped back after passing through the FIFOs but before entering the transceivers. This loopback was activated by t…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.3
cmgDsuFarEndDataChannelLoopbackobsolete Indicates whether a Far-end Data Channel loopback is active. This is functionally equivalent to the Near-end Data Channel loopback, except that this loopback was activated by the far end, that is, a DSU across the netwo…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.4
cmgDsuRemoteLoopbackobsolete Indicates whether a Remote loopback is active, in which a signal received from the CSU is looped back before entering the FIFOs. This loopback may have been activated by either the near end (this DSU) or the far end (a…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.5
cmgDsuDataTerminalLoopbackobsolete Indicates whether a Data Terminal loopback is active, in which a signal received from the DTE is looped back after passing through the FIFOs. This loopback can only be activated by the near end, that is, this DSU.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.6
cmgDsuResetobsolete Set to on(1) to request reinitialization of the DSU.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.7

Table of analog ports in this media gateway.

cmgAnalogPortEntry row .1.3.6.1.4.1.6889.2.9.1.1.12.1.1

An entry in the table, representing a single analog port.

Indexes

cmgAnalogSlot cmgAnalogPort

Column	Syntax	OID
cmgAnalogSlot Slot number of this analog port.	Integer32 Constraints: range: 1-9	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.1
cmgAnalogPort Port number of this analog port.	Integer32 Constraints: range: 1-24	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.2
cmgAnalogEchoCancellerControl The echo canceller control setting for this analog port. auto means that the system will enable or disable the echo canceller as appropriate for each call. fixedOn indicates that the analog firmware always enables the e…	Enumerationr/w Enumerated Values: 0 auto 1 on 2 off 3 fixedOn 4 notSupported	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.3
cmgAnalogEchoCancellerConfig1 Echo canceller configuration setting for this analog port (byte 1 of 2). This value is not writeable if cmgAnalogEchoCancellerControl is fixedOn(3) or notSupported(4).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.4
cmgAnalogEchoCancellerConfig2 Echo canceller configuration setting for this analog port (byte 2 of 2). This value is not writeable if cmgAnalogEchoCancellerControl is fixedOn(3) or notSupported(4).	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.5
cmgAnalogBalance Balance index.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.6
cmgAnalogReceiveGain The receive gain multiplied by 100, for instance -123 indicates -1.23dB.	Integer32r/w Constraints: range: -600-300	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.7
cmgAnalogTransmitGain The transmit gain multiplied by 100, for instance +287 indicates 2.87dB.	Integer32r/w Constraints: range: -600-300	.1.3.6.1.4.1.6889.2.9.1.1.12.1.1.8

Table of Expansion Units connected to this media gateway.

cmgExpansions row .1.3.6.1.4.1.6889.2.9.1.1.13.1.1

An entry in the table, representing a single Expansion Unit.

Indexes

cmgExpansionSlot

Column	Syntax	OID
cmgExpansionSlot Expansion Unit Slot.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.1
cmgExpansionModelNumber Expansion Unit model.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.2
cmgExpansionDescription Expansion Unit description.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.3
cmgExpansionSerialNumber Expansion Unit serial number.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.4
cmgExpansionHWVintage Expansion Unit HW vintage.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.5
cmgExpansionHWSuffix Expansion Unit HW suffix.	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.6
cmgExpansionDemandTest When set to on(1), activates on demand test for the Expansion Unit.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.7
cmgExpansionDemandTestResult Result of the on demand test for the Expansion Unit. Failure(1) may be the result of a disconnected or bad cable.	Enumeration Enumerated Values: 1 fail 255 pass	.1.3.6.1.4.1.6889.2.9.1.1.13.1.1.8

Table of VoIP engines in the media gateway.

cmgVoipEngineEntry row .1.3.6.1.4.1.6889.2.9.1.4.5.1

An entry in the table representing one VoIP engine.

Indexes

cmgVoipSlot

Column	Syntax	OID
cmgVoipSlot Location of this VoIP engine, either a media module slot (1-4 for G700) or the motherboard (100 for G700, 10 for G350, G250). For G450/G430 the index arrangement is as follows: * For V1 - V10 the rule is cmgVoIPSlot = …	Integer32 Constraints: range: 1-104	.1.3.6.1.4.1.6889.2.9.1.4.5.1.1
cmgVoipMACAddress MAC address of the component hosting this VoIP engine.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.6889.2.9.1.4.5.1.2
cmgVoipStaticIpAddress Administered static IPv4 Address of this VoIP engine. If cmgVoipEngineUseDhcp was off(2) at startup time, this value determined the current IPv4 address of the engine.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.9.1.4.5.1.3
cmgVoipCurrentIpAddress IPv4 Address currently in use at this VoIP engine. If cmgVoipEngineUseDhcp was on(2) at startup time, this value was received from the DHCP server. Otherwise it is equal to cmgVoipStaticIpAddress at startup time.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.9.1.4.5.1.4
cmgVoipJitterBufferSize Size in bytes of the dynamic jitter buffer at this VoIP engine.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.9.1.4.5.1.5
cmgVoipTotalChannels Total channels available to this VoIP engine.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.9.1.4.5.1.6
cmgVoipChannelsInUse Number of channels in use at this VoIP engine.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.9.1.4.5.1.7
cmgVoipAverageOccupancy 5-minute average occupancy of this VoIP engine.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.6889.2.9.1.4.5.1.8
cmgVoipHyperactivity Indicates whether hyperactivity has been detected by this VoIP engine.	Enumeration Enumerated Values: 1 normal 2 hyperactive 255 unknown	.1.3.6.1.4.1.6889.2.9.1.4.5.1.9
cmgVoipAdminState Maintenance busy-out state of this VoIP engine.	Enumeration Enumerated Values: 1 busy-out 2 release 3 camp-on 255 unknown	.1.3.6.1.4.1.6889.2.9.1.4.5.1.10
cmgVoipDspFWVersion Firmware version of the DSP complex on this VoIP engine. This is also available in the Load MIB.	OctetString Constraints: range: 0-9	.1.3.6.1.4.1.6889.2.9.1.4.5.1.11
cmgVoipDspStatus Status of the DSP complex on this VoIP engine.	Enumeration Enumerated Values: 1 idle 2 inUse 3 fault	.1.3.6.1.4.1.6889.2.9.1.4.5.1.12
cmgVoipEngineReset Setting the value of this attribute to ON is interpreted as a reset command for the VoIP engine. It initiates a complete reinitialisation of the VoIP engine.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.4.5.1.13
cmgVoipFaultMask Each bit of this value set to '1' indicates a specific fault in the VoIP engine. Octets are numbered in the order in which they appear in the PDU. Bits are numbered from the most-significant leftmost bit …	OctetString Constraints: range: 0-2	.1.3.6.1.4.1.6889.2.9.1.4.5.1.14
cmgVoipStaticInetAddressType Administered static IPv6 Address Type of the VoIP engine. The VoIP Engine Processor can have two IP addresses: one IPv4 and the second IPv6. cmgVoipStaticIpAddress presents the IPv4 address and this MIB item presents t…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6889.2.9.1.4.5.1.15
cmgVoipStaticInetAddress Administered static IPv6 Address of the VoIP engine. 1. The address type of this object is specified in cmgVoipStaticInetAddressType. 2. Default of cmgVoipStaticInetAddressType is unknown(0) and cmgVoipStaticInetA…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6889.2.9.1.4.5.1.16
cmgVoipCurrentInetAddressType IPv6 Address Type currently in use at this VoIP engine. The VoIP Engine Processor can have two IP address one IPv4 and the second IPv6. cmgVoipCurrentIpAddress presents the IPv4 address and this MIB item presents the I…	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.6889.2.9.1.4.5.1.17
cmgVoipCurrentInetAddress IPv6 Address currently in use at this VoIP engine. 1. The address type of this object is specified in cmgVoipCurrentInetAddressType. 2. Default of cmgVoipCurrentInetAddressType is unknown(0) and cmgVoipCurrentInet…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.6889.2.9.1.4.5.1.18

Table representing the DSP cores in VoIP engine of the media gateway.

cmgVoipDSPCoreEntry row .1.3.6.1.4.1.6889.2.9.1.4.6.1

An entry in the table representing one DSP Core of a VoIP engine.
This table uses an external index from cmgVoIPEngineTable
which selects a DSP SoDIMM/engine module and secondary index
cmgDSPVoIPCoreID that selects a …

Indexes

cmgVoipSlot cmgDSPCoreCoreId

Column	Syntax	OID
cmgDSPCoreCoreId The DSP core ID within the specific DSP VoIP engine.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.6889.2.9.1.4.6.1.1
cmgDSPCoreTotalChannels Total channels available to this DSP core.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.6889.2.9.1.4.6.1.2
cmgDSPCoreChannelsInUse Number of channels in use at this DSP core.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.6889.2.9.1.4.6.1.3
cmgDSPCoreAdminState Maintenance busy-out state of this DSP core.	Enumerationr/w Enumerated Values: 1 busy-out 2 release 3 camp-on 255 unknown	.1.3.6.1.4.1.6889.2.9.1.4.6.1.4
cmgDSPCoreStatus Status of the DSP Core.	Enumeration Enumerated Values: 1 idle 2 inUse 3 fault	.1.3.6.1.4.1.6889.2.9.1.4.6.1.5
cmgDSPCoreDemandTest Activates on demand test for the DSP Core.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.4.6.1.6
cmgDSPCoreDemandTestResult Result of the on demand test for the DSP Core.	Enumeration Enumerated Values: 1 errorCode1 2 errorCode2 3 errorCode3 4 errorCode4 5 errorCode5 6 errorCode6 7 notResponding 255 pass	.1.3.6.1.4.1.6889.2.9.1.4.6.1.7

Table of trap receivers in this media gateway.

cmgTrapManagerEntry row .1.3.6.1.4.1.6889.2.9.1.5.1.1

An entry in the table, representing a single trap receiver.

Indexes

cmgTrapManagerAddress

Column	Syntax	OID
cmgTrapManagerAddress IP address of this trap receiver.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.6889.2.9.1.5.1.1.1
cmgTrapManagerControl Specifies whether this trap receiver is currently receiving traps.	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.6889.2.9.1.5.1.1.3
cmgTrapManagerMask A bit mask indicating the trap categories of interest to this trap receiver. Bit Category 0 Power warnings 1 Fan and temperature warnings 2 Application faults 3 Module insert or remove 4 Configuration traps: port enable…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.6889.2.9.1.5.1.1.4
cmgTrapManagerRowStatus The status of this entry in the table. Available states: active(1), -- Trap receiver is administered, though not -- necessarily active. createAndGo(4), -- Used to add a new receiver to the table. destroy(6) -- Used t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6889.2.9.1.5.1.1.5

This table is used for managing contact closure adjunct port. 
The adjunct box contains two relays.

cmgContactClosuresEntry row .1.3.6.1.4.1.6889.2.9.1.6.1.1

Indexes

cmgCcModule cmgCcPort cmgCcRelay

Column	Syntax	OID
cmgCcModule	Integer32 Constraints: range: 10-10	.1.3.6.1.4.1.6889.2.9.1.6.1.1.1
cmgCcPort	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.6889.2.9.1.6.1.1.2
cmgCcRelay Each contact closure port can control two relays on the adjunct	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6889.2.9.1.6.1.1.3
cmgCcAdminState The admin state of the contact-closure where: Auto(1): The Contact Closure is controlled by the call Controller. Trigger(2): The contact closure relay is triggered. Off(3): The contact closure relay is off (not triggere…	Enumerationr/w Enumerated Values: 1 auto 2 manualTrigger 3 manualOff	.1.3.6.1.4.1.6889.2.9.1.6.1.1.4
cmgCcPulseDuration The number of second the relay is triggred after each pulse activation signal is received from the call-controller.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.6889.2.9.1.6.1.1.5
cmgCcStatus The actual contact closure relay state	Enumeration Enumerated Values: 1 triggered 2 off	.1.3.6.1.4.1.6889.2.9.1.6.1.1.6

Emergency Transfer Function Table (short circuit             
Line and Trunk ports in case of call-controller connectivity
problems)

cmgETREntry row .1.3.6.1.4.1.6889.2.9.1.7.1.1

Indexes

cmgEtrModule

Column	Syntax	OID
cmgEtrModule Module number - 10 on G450	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.6889.2.9.1.7.1.1.1
cmgEtrAdminState Module's ETR administration state where: off(1): ETR is turned off without checking if there is an active call among trunk-line port pairs auto(2): ETR is turned off as soon as the module is operati…	Enumerationr/w Enumerated Values: 1 auto 2 on 3 off	.1.3.6.1.4.1.6889.2.9.1.7.1.1.2
cmgEtrNumberOfPairs The number of ETR TRUNK-LINE pairs	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.6889.2.9.1.7.1.1.3
cmgEtrStatus The current status of the ETR function	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.6889.2.9.1.7.1.1.4
cmgEtrCurrentLoopDetect Each bit in the bit-mask represents a current-loop-detector of one trunk-line ETR pairs. The bit is set when current is detected	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.6889.2.9.1.7.1.1.5