G6-VLAN-MIB Table View

This section defines some default VLAN settings.

vlanIdConfigEntry row .1.3.6.1.4.1.3181.10.6.2.82.2.1

Indexes

vlanIdConfigIndex

Column	Syntax	OID
vlanIdConfigIndex Automatically generated	Integer32 Constraints: range: 0-0	.1.3.6.1.4.1.3181.10.6.2.82.2.1.1
vlanIdConfigManagementVlanId VLAN ID for internal management port. Packets sent by the management agent are tagged with this VLAN ID,	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.2.1.2
vlanIdConfigManagementPriority VLAN Priority for internal management port. Packets sent by the internal management agent are tagged with this priority value.	Enumerationr/w Enumerated Values: 0 priority0 1 priority1 2 priority2 3 priority3 4 priority4 5 priority5 6 priority6 7 priority7	.1.3.6.1.4.1.3181.10.6.2.82.2.1.3
vlanIdConfigVoiceVlanId Voice VLAN ID. Special VLAN for IP phones.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.2.1.4
vlanIdConfigRstpVlanId RSTP VLAN ID. When using single instance Spanning Tree (STP or RSTP) in combination with VLANs, all spanning tree messages are tagged with this VLAN ID.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.2.1.5
vlanIdConfigUnauthorizedVlanId When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.2.1.6
vlanIdConfigSmartofficeVlanId VLAN ID used for SmartOffice control traffic between director and controllers. Also used by the SmartOffice GUI.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.2.1.7

These settings define the default VLANs per port and defines how untagged data are treated.

portConfigEntry row .1.3.6.1.4.1.3181.10.6.2.82.3.1

Indexes

portConfigPortIndex

Column	Syntax	OID
portConfigPortIndex Automatically generated	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.3181.10.6.2.82.3.1.1
portConfigVlanMode Defines how the VLAN tag of incoming and outgoing packets shall be handled on port.	Enumerationr/w Enumerated Values: 0 access 1 hybrid 2 trunk 3 qInQCustomer 4 qInQProvider	.1.3.6.1.4.1.3181.10.6.2.82.3.1.2
portConfigDefaultVlanId Default VLAN ID for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.3.1.3
portConfigForceDefaultVlanId When enabled, incoming packets with existing VLAN tag are overwritten with the default port VLAN ID.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.3.1.4
portConfigDefaultPriority Default priority value for port. Incoming packets without VLAN tag are automatically tagged using the default VLAN ID and default priority values.	Enumerationr/w Enumerated Values: 0 priority0 1 priority1 2 priority2 3 priority3 4 priority4 5 priority5 6 priority6 7 priority7	.1.3.6.1.4.1.3181.10.6.2.82.3.1.5
portConfigPriorityOverride When enabled, incoming packets with existing VLAN tag are overwritten with the default priority value.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.3.1.6
portConfigUnauthorizedVlanId When using port access control with dynamic VLANs, unauthorized ports are attached to this VLAN. When set to 0 the global vlan_id_config.unauthorized_vlan_id parameter applies. Use this parameter to set an independend p…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.3.1.7
portConfigFallbackVlanId When using port access control with dynamic VLANs and a RADIUS server, the fallback vlan is assigned when the RADIUS server is unavailable. If this parameter is set to 0 the unauthorized vlan is used instead. If this is…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.3.1.8
portConfigQInQEthertype Ethertype configuration only applies for vlan_mode Q_IN_Q.	Enumerationr/w Enumerated Values: 0 ox88a8 1 ox9100 2 ox9200 3 ox8100	.1.3.6.1.4.1.3181.10.6.2.82.3.1.9

Defines the used VLANs and their associated ports.

filterConfigEntry row .1.3.6.1.4.1.3181.10.6.2.82.4.1

Indexes

filterConfigIndex

Column	Syntax	OID
filterConfigIndex Automatically generated	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.3181.10.6.2.82.4.1.1
filterConfigVlanId Defines filter table entry for this VLAN ID. This is the key value for the table. Type '=:' to edit, use index '[*] = new_vlan:' to add an entry. Edit string to nothing to delete entry.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.4.1.2
filterConfigEntryMode When disabled, filtering for this VLAN ID is disabled without deleting the table entry. This can be used for testing and configuration.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.4.1.3
filterConfigAlias User-definable name string for VLAN.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.4.1.4
filterConfigMstpGroup All filter entries with the same mstp_group number will share an MSTP instance. A group may consist of one or many vlan entries. A value of 0 indicates that MSTP is not used for this VLAN.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.4.1.5
filterConfigFabricAttachISid This parameter defines the VLAN to I-SID binding when the shortest path bridging (SPB) fabric attach feature is used.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.4.1.6
filterConfigPortMembers Defines port memberships for VLAN. Syntax: slot/port, slot/port or use hex value for quick setup = 0x3f (ports 1-6)	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3181.10.6.2.82.4.1.7
filterConfigManagementMembers Defines the port membership for the internal management port(s).	Enumerationr/w Enumerated Values: 0 none 1 cpu1 2 cpu2 3 all	.1.3.6.1.4.1.3181.10.6.2.82.4.1.8
filterConfigPriorityOverride When enabled the priority value of packets tagged with this VLAN is overwritten with the new_priority value.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.4.1.9
filterConfigNewPriority VLAN priority value when priority_override is enabled.	Enumerationr/w Enumerated Values: 0 priority0 1 priority1 2 priority2 3 priority3 4 priority4 5 priority5 6 priority6 7 priority7	.1.3.6.1.4.1.3181.10.6.2.82.4.1.10

Configuration parameter concerning the port specific MVRP setttings.

mvrpPortConfigEntry row .1.3.6.1.4.1.3181.10.6.2.82.6.1

Indexes

mvrpPortConfigPortIndex

Column	Syntax	OID
mvrpPortConfigPortIndex Automatically generated	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.3181.10.6.2.82.6.1.1
mvrpPortConfigEnableMvrp Enable MVRP (Multiple VLAN Reservation Protocol) on this port.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.6.1.2
mvrpPortConfigRegistrationMode Configuration of the MVRP registration mode.	Enumerationr/w Enumerated Values: 0 normal 1 fixed 2 forbidden	.1.3.6.1.4.1.3181.10.6.2.82.6.1.3
mvrpPortConfigJoinTimer Number of milliseconds that the interface must wait before sending MVRP PDUs.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.6.1.4
mvrpPortConfigLeaveTimer Number of milliseconds that the switch retains a VLAN in the Leave state before the VLAN is unregistered. At a minimum, set the leave-timer interval at twice the join-timer interval.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.6.1.5
mvrpPortConfigLeaveallTimer Number of milliseconds between the sending of Leave All messages.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.6.1.6

Configuration parameter controling the fabric attach feature. Each port can be configured individually.

fabricAttachPortConfigEntry row .1.3.6.1.4.1.3181.10.6.2.82.7.1

Indexes

fabricAttachPortConfigPortIndex

Column	Syntax	OID
fabricAttachPortConfigPortIndex Automatically generated	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.3181.10.6.2.82.7.1.1
fabricAttachPortConfigEnableFabricAttach Shortest path bridging (SPB) fabric attach feature can be used to simplify configuration in an SBP enabled network. Please also generally enable the LLDP function to use this feature. When enabled the port will act as c…	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.7.1.2
fabricAttachPortConfigMsgAuthentication when enabled message authentication using the fa_auth key is used.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.3181.10.6.2.82.7.1.3
fabricAttachPortConfigEnterFaAuthKey Enter the fabric attach authentication keys required to access the network. No spaces are permitted.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.7.1.4
fabricAttachPortConfigEncryptedFaAuthKey Encrypted form of the entered key. This is automatically filled in when the enter_fa_auth command is executed.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.7.1.5

This table lists the status of all defined VLANs.

statusEntry row .1.3.6.1.4.1.3181.10.6.2.82.101.1

Indexes

statusVlanIndex

Column	Syntax	OID
statusVlanIndex Automatically generated	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.3181.10.6.2.82.101.1.1
statusVlanId VLAN identifier	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.101.1.2
statusTimeMark	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.101.1.3
statusAlias Contains the alias name for static entries.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.101.1.4
statusPortMembers Lists all ports that belong to this VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3181.10.6.2.82.101.1.5
statusFilterDatabase filter data base	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.101.1.6
statusEgressPorts The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3181.10.6.2.82.101.1.7
statusUntaggedPorts The set of ports which are transmitting traffic for this VLAN as untagged frames.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3181.10.6.2.82.101.1.8
statusFabricAttachState Indicates if auto attachment to the fabric was successful.	Enumeration Enumerated Values: 0 disabled 1 active 2 rejected	.1.3.6.1.4.1.3181.10.6.2.82.101.1.9
statusCreationMode Indicates by which means this VLAN entry was created.	Enumeration Enumerated Values: 0 filterTable 1 pacc 2 mvrp	.1.3.6.1.4.1.3181.10.6.2.82.101.1.10
statusCreationTime The value of system.uptime when this VLAN was created.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.101.1.11

Port related view of the currently active VLAN setup.

portStatusEntry row .1.3.6.1.4.1.3181.10.6.2.82.102.1

Indexes

portStatusPortIndex

Column	Syntax	OID
portStatusPortIndex Automatically generated	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.3181.10.6.2.82.102.1.1
portStatusAssignedVlanIds List of all VLAN ids that are configured or dynamically assigned to this port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3181.10.6.2.82.102.1.2
portStatusDynamicDefaultVlanId Indicates the current port default VLAN. The value may change due to port authentication or configuration.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3181.10.6.2.82.102.1.3
portStatusLastUpdateMethod Indicates what caused the last VLAN reconfiguration.	Enumeration Enumerated Values: 0 config 1 viaMacTable 2 macViaRadius 3 ms8021xViaRadius	.1.3.6.1.4.1.3181.10.6.2.82.102.1.4
portStatusLastUpdatingMac Indicates which MAC address, if any, was involve in changing the VLAN setting for this port last.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3181.10.6.2.82.102.1.5
portStatusLastUpdateTime Indicates the time when the VLAN settings were last changed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.102.1.6

This table lists MVRP status information.

mvrpStatusEntry row .1.3.6.1.4.1.3181.10.6.2.82.103.1

Indexes

mvrpStatusPortIndex

Column	Syntax	OID
mvrpStatusPortIndex Automatically generated	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.3181.10.6.2.82.103.1.1
mvrpStatusLastSourceMac The Source MAC Address of the last MVRP message received on this port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3181.10.6.2.82.103.1.2
mvrpStatusFailedRegistrations The total number of failed MVRP registrations, for any reason, on this port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3181.10.6.2.82.103.1.3