G6-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

configTable

table

.1.3.6.1.4.1.3181.10.6.1.33.3 · 1 row entry · 4 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk configTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-POE-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-POE-MIB::configTable'

Power over Ethernet function permits the powering of connected units which do not use their own local power supply.

configEntry row .1.3.6.1.4.1.3181.10.6.1.33.3.1

Indexes

configPortIndex

Column Syntax OID

configPortIndex

Automatically generated

Integer32

Constraints:
range: 0-24

.1.3.6.1.4.1.3181.10.6.1.33.3.1.1

configMode

Used to enable or disable PoE function.

Enumerationr/w

Enumerated Values:

0	disabled
1	automatic
2	class0
3	class1
4	class2
5	class3
6	class4
7	forcedOn

.1.3.6.1.4.1.3181.10.6.1.33.3.1.2

configPriorityPort

Ports without priority may be switched off under a power contention situation.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.33.3.1.3

configEnablePoePlus

Allow between 15-30W power consumption.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled
2	lldpControlled

.1.3.6.1.4.1.3181.10.6.1.33.3.1.4

statusTable

table

.1.3.6.1.4.1.3181.10.6.1.33.101 · 1 row entry · 9 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk statusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-POE-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-POE-MIB::statusTable'

This table list the current PoE port conditions.

statusEntry row .1.3.6.1.4.1.3181.10.6.1.33.101.1

Indexes

statusPortIndex

Column Syntax OID

statusPortIndex

Automatically generated

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.3181.10.6.1.33.101.1.1

statusCondition

PoE status and conditions.

Enumeration

Enumerated Values:

0	disabled
1	powerOff
2	discovering
3	powered
4	classMismatch
5	shortCircuit
6	rejected
7	overCurrent
8	overTemp
9	voltageTooLow

.1.3.6.1.4.1.3181.10.6.1.33.101.1.2

statusDeterminedClass

Determined and negotiated PoE class.

Enumeration

Enumerated Values:

0	isClass0
1	isClass1
2	isClass2
3	isClass3
4	isClass4
5	isOverload
7	probesNotEqual
255	isUnknown

.1.3.6.1.4.1.3181.10.6.1.33.101.1.3

statusOutputCurrent

Current delivered to the attached device. (units: mA)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3181.10.6.1.33.101.1.4

statusOutputVoltage

Voltage deliverd to the attached device. (units: mV)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3181.10.6.1.33.101.1.5

statusOutputPower

Calculated power delivered to the attached device. (units: mW)

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.3181.10.6.1.33.101.1.6

statusPowerDeniedCounter

Incremented whenever a PoE request was denied regardless of reason.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.33.101.1.7

statusOverCurrentCounter

Incremented whenever an over_current condition was detected.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.33.101.1.8

statusShortCircuitCounter

Incremented whenever a short circuit was detected.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.33.101.1.9

energySuppliedTable

table

.1.3.6.1.4.1.3181.10.6.1.33.102 · 1 row entry · 7 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk energySuppliedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-POE-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-POE-MIB::energySuppliedTable'

This table list the power provided via PoE ports. The values are automatically updated in the given interval.

energySuppliedEntry row .1.3.6.1.4.1.3181.10.6.1.33.102.1

Indexes

energySuppliedPortIndex

Column	Syntax	OID
energySuppliedPortIndex Automatically generated	Integer32 Constraints: `range: 0-31`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.1`
energySuppliedLast5Seconds Energy supplied in the past 5 seconds. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.2`
energySuppliedLast15Seconds Energy supplied in the past 15 seconds. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.3`
energySuppliedLastMinute Energy supplied in the past 60 seconds. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.4`
energySuppliedLast15Minutes Energy supplied in the past 15 minutes. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.5`
energySuppliedLastHour Energy supplied in the past hour. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.6`
energySuppliedLastDay Energy supplied in the past day. Value in joule.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.3181.10.6.1.33.102.1.7`