G6-MSP1000-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

225

slotConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.2 · 1 row entry · 7 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk slotConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::slotConfigTable'

slotConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.2.1

Indexes

slotConfigIndex

Column Syntax OID

slotConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.2.1.1

slotConfigModule

Defines which module is expected to be placed in this slot. This should be identical to the actual hardware. The value may be set prior to actual roll-out to preconfigure the system.

Enumerationr/w

Enumerated Values:

0	undefined
1	empty
2	legacy
3	passive
10	fc8Filter
11	fc8aFilter
12	fc8xFilter
13	b4sFilter
14	b4xFilter
15	b8mFilter
16	b8dFilter
17	fd4Filter
18	dc1Filter
19	se1
50	tdm4
56	m2g
57	wcm2
60	xcm1
61	x2g
62	t4g
63	txg
65	nm1
66	nm2
72	os1
87	cxg
88	cxgp
104	om1
105	em2
106	lp1
108	nm3
109	em3
110	nm3p

.1.3.6.1.4.1.3181.10.6.1.94.2.1.2

slotConfigSparepartMode

When enabled the module is operating normally but will not generate any alarms. This is useful for modules that are inserted but only used as spare and are not properly connected at this time. This way unnecassary alarm…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.2.1.3

slotConfigPort1Alias

User defined port name for easier reference.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.2.1.4

slotConfigPort2Alias

User defined port name for easier reference.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.2.1.5

slotConfigPort3Alias

User defined port name for easier reference.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.2.1.6

slotConfigPort4Alias

User defined port name for easier reference.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.2.1.7

x2gConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.3 · 1 row entry · 20 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk x2gConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::x2gConfigTable'

This table is used to define any X2G or OFX-3 modules in the system.

x2gConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.3.1

Indexes

x2gConfigIndex

Column Syntax OID

x2gConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.3.1.1

x2gConfigPort1Datarate

This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.

Enumerationr/w

Enumerated Values:

0	transparent
1	fix100
2	ms100mEth
3	oc3
4	escon
5	sdi
6	oc12
7	ms1xFc
8	ms1gEth
9	hdtv
10	ms2xFc
11	oc48
12	m2g
13	otu1

.1.3.6.1.4.1.3181.10.6.1.94.3.1.2

x2gConfigPort2Datarate

This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.

Enumerationr/w

Enumerated Values:

0	transparent
1	fix100
2	ms100mEth
3	oc3
4	escon
5	sdi
6	oc12
7	ms1xFc
8	ms1gEth
9	hdtv
10	ms2xFc
11	oc48
12	m2g
13	otu1

.1.3.6.1.4.1.3181.10.6.1.94.3.1.3

x2gConfigPort3Datarate

This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.

Enumerationr/w

Enumerated Values:

0	transparent
1	fix100
2	ms100mEth
3	oc3
4	escon
5	sdi
6	oc12
7	ms1xFc
8	ms1gEth
9	hdtv
10	ms2xFc
11	oc48
12	m2g
13	otu1

.1.3.6.1.4.1.3181.10.6.1.94.3.1.4

x2gConfigPort4Datarate

This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.

Enumerationr/w

Enumerated Values:

0	transparent
1	fix100
2	ms100mEth
3	oc3
4	escon
5	sdi
6	oc12
7	ms1xFc
8	ms1gEth
9	hdtv
10	ms2xFc
11	oc48
12	m2g
13	otu1

.1.3.6.1.4.1.3181.10.6.1.94.3.1.5

x2gConfigCrossConnect

This parameter defines the data path through the module. It is also used to setup a permanent bit error rate test.

Enumerationr/w

Enumerated Values:

0	disconnect
1	alternate
5	backup
9	ringBackupWest
11	multicast
12	dropContinue
13	addDropWest
14	addDropEast
15	ringBackupEast
16	crossOver
17	switchP1P2
18	switchP1P3
19	switchP1P4
20	normal
21	bertPort4

.1.3.6.1.4.1.3181.10.6.1.94.3.1.6

x2gConfigDeactivatePort1

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.7

x2gConfigDeactivatePort2

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.8

x2gConfigDeactivatePort3

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.9

x2gConfigDeactivatePort4

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.10

x2gConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.3.1.11

x2gConfigLossOfSignalHandling

When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the currently associated port.

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.3.1.12

x2gConfigOptimizedFor8b10b

Enable this feature when Ethernet or FibreChannel is used. Do not set when SDH is used on any port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.13

x2gConfigBertPattern

Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.

Enumerationr/w

Enumerated Values:

0	ms27
2	ms223
3	ms231
4	cjPat
5	crPat
6	ms8b10bCnt

.1.3.6.1.4.1.3181.10.6.1.94.3.1.14

x2gConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.3.1.15

x2gConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.3.1.16

x2gConfigBackupTrigger

Defines under which optical signal condition an automated backup is initiated.

Enumerationr/w

Enumerated Values:

0	disabled
1	signalLoss
2	clockLoss

.1.3.6.1.4.1.3181.10.6.1.94.3.1.17

x2gConfigStayWithLastLink

When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter expires.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.18

x2gConfigBackupEnd

Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.

Enumerationr/w

Enumerated Values:

0	noDelay
1	ms15Seconds
2	ms15Minutes
3	manually

.1.3.6.1.4.1.3181.10.6.1.94.3.1.19

x2gConfigPermitLinkOverride

Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in loss of connection.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.3.1.20

txgConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.4 · 1 row entry · 12 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk txgConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::txgConfigTable'

This table is used to define any TXG or XCM-2 modules in the system.

txgConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.4.1

Indexes

txgConfigIndex

Column Syntax OID

txgConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.4.1.1

txgConfigTxgDatarate

This parameter defines the data rate used to setup the internal retimer to provide 3R regeneration. Note that internally interconnected ports must be set to the same rate.

Enumerationr/w

Enumerated Values:

1	oc192
2	ms10gEth
3	oc192Fec
4	otu2
5	ms10xFc
6	otu2e
7	otu1f
8	otu2f

.1.3.6.1.4.1.3181.10.6.1.94.4.1.2

txgConfigTxgOperationMode

This parameter defines the data path through the module when an internal cross connect is avalable. It is also used to setup a permanent bit error rate test. (most settings apply to X2G, TXG, OFX-3, XCM-2 only)

Enumerationr/w

Enumerated Values:

0	disabled
2	transponder
3	repeater
4	bertPort1
5	bertPort2

.1.3.6.1.4.1.3181.10.6.1.94.4.1.3

txgConfigPort1ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.4.1.4

txgConfigPort2ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.4.1.5

txgConfigDeactivatePort1

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.4.1.6

txgConfigDeactivatePort2

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.4.1.7

txgConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.4.1.8

txgConfigLossOfSignalHandling

When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.4.1.9

txgConfigBertPattern

Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.

Enumerationr/w

Enumerated Values:

0	ms27
2	ms223
3	ms231
4	cjPat
5	crPat
6	ms8b10bCnt

.1.3.6.1.4.1.3181.10.6.1.94.4.1.10

txgConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.4.1.11

txgConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.4.1.12

cxgPlusConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.5 · 1 row entry · 15 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk cxgPlusConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::cxgPlusConfigTable'

This table is used to define any CXG+ or OFC-10 modules in the system.

cxgPlusConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.5.1

Indexes

cxgPlusConfigIndex

Column Syntax OID

cxgPlusConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.5.1.1

cxgPlusConfigCxgPort12Datarate

The CXG relies on the features of the XFP to define its datarate. Since various XFP offer different rates with the same settings, only a general setting is provided. Both ports must operate at the same rate.

Enumerationr/w

Enumerated Values:

0	transparent
1	ms8xFc
2	ms10gEth
3	ms10xFc16xFc

.1.3.6.1.4.1.3181.10.6.1.94.5.1.2

cxgPlusConfigCxgPort34Datarate

Enumerationr/w

Enumerated Values:

0	transparent
1	ms8xFc
2	ms10gEth
3	ms10xFc16xFc

.1.3.6.1.4.1.3181.10.6.1.94.5.1.3

cxgPlusConfigPort1ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.5.1.4

cxgPlusConfigPort2ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.5.1.5

cxgPlusConfigPort3ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.5.1.6

cxgPlusConfigPort4ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.5.1.7

cxgPlusConfigDeactivatePort1

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.5.1.8

cxgPlusConfigDeactivatePort2

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.5.1.9

cxgPlusConfigDeactivatePort3

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.5.1.10

cxgPlusConfigDeactivatePort4

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.5.1.11

cxgPlusConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.5.1.12

cxgPlusConfigLossOfSignalHandling

When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.5.1.13

cxgPlusConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.5.1.14

cxgPlusConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.5.1.15

cxgConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.6 · 1 row entry · 10 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk cxgConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::cxgConfigTable'

This table is used to define any CXG or XCM-3 modules in the system.

cxgConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.6.1

Indexes

cxgConfigIndex

Column Syntax OID

cxgConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.6.1.1

cxgConfigCxgPort12Datarate

Enumerationr/w

Enumerated Values:

0	transparent
1	ms8xFc
2	ms10gEth
3	ms10xFc16xFc

.1.3.6.1.4.1.3181.10.6.1.94.6.1.2

cxgConfigPort1ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.6.1.3

cxgConfigPort2ItuChannel

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	fixed
22	ch11
24	ch12
26	ch13
28	ch14
30	ch15
32	ch16
34	ch17
36	ch18
38	ch19
40	ch20
42	ch21
44	ch22
46	ch23
48	ch24
50	ch25
52	ch26
54	ch27
56	ch28
58	ch29
60	ch30
62	ch31
64	ch32
66	ch33
68	ch34
70	ch35
72	ch36
74	ch37
76	ch38
78	ch39
80	ch40
82	ch41
84	ch42
86	ch43
88	ch44
90	ch45
92	ch46
94	ch47
96	ch48
98	ch49
100	ch50
102	ch51
104	ch52
106	ch53
108	ch54
110	ch55
112	ch56
114	ch57
116	ch58
118	ch59
120	ch60
122	ch61
124	ch62
126	ch63

.1.3.6.1.4.1.3181.10.6.1.94.6.1.4

cxgConfigDeactivatePort1

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.6.1.5

cxgConfigDeactivatePort2

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.6.1.6

cxgConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.6.1.7

cxgConfigLossOfSignalHandling

When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.6.1.8

cxgConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.6.1.9

cxgConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.6.1.10

t4gConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.7 · 1 row entry · 13 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk t4gConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::t4gConfigTable'

This table is used to define any T4G or OFC-4 modules in the system.

t4gConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.7.1

Indexes

t4gConfigIndex

Column Syntax OID

t4gConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.7.1.1

t4gConfigT4gPort12Datarate

Enumerationr/w

Enumerated Values:

0	transparent
2	ms100mEth
3	oc3
4	escon
6	oc12
7	ms1xFc
8	ms1gEth
10	ms2xFc
11	oc48
12	infiniband
14	ms4xFc

.1.3.6.1.4.1.3181.10.6.1.94.7.1.2

t4gConfigT4gPort34Datarate

Tunable laser are supported. Select the wavelength from the supplied 100GHZ ITU-T grid. If the wavelength is not supported by the XFP, a warning event will be received.

Enumerationr/w

Enumerated Values:

0	transparent
2	ms100mEth
3	oc3
4	escon
6	oc12
7	ms1xFc
8	ms1gEth
10	ms2xFc
11	oc48
12	infiniband
14	ms4xFc

.1.3.6.1.4.1.3181.10.6.1.94.7.1.3

t4gConfigT4gOperationMode

Enumerationr/w

Enumerated Values:

0	disabled
1	transponder
2	bertPort4

.1.3.6.1.4.1.3181.10.6.1.94.7.1.4

t4gConfigDeactivatePort1

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.7.1.5

t4gConfigDeactivatePort2

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.7.1.6

t4gConfigDeactivatePort3

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.7.1.7

t4gConfigDeactivatePort4

When enabled, the optical interface is disabled and communication is cut.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.7.1.8

t4gConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.7.1.9

t4gConfigLossOfSignalHandling

When set to LOCAL a loss of input signal will not affect another port. When set to PERCOLATE, a loss of signal will turn off the transmitter of the other port.

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.7.1.10

t4gConfigBertPattern

Defines the bit pattern with which the build-in bit error rate tester (BERT) operates when cross connect is set to BERT.

Enumerationr/w

Enumerated Values:

0	ms27
2	ms223
3	ms231
4	cjPat
5	crPat
6	ms8b10bCnt

.1.3.6.1.4.1.3181.10.6.1.94.7.1.11

t4gConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.7.1.12

t4gConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.7.1.13

m2gConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.8 · 1 row entry · 11 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk m2gConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::m2gConfigTable'

This table is used to define any M2G or TDM-2 modules in the system.

m2gConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.8.1

Indexes

m2gConfigIndex

Column Syntax OID

m2gConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.8.1.1

m2gConfigChannel1Datarate

Devices the datarate of the first TDM channel (port 1)

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1gEth
2	ms1xFc

.1.3.6.1.4.1.3181.10.6.1.94.8.1.2

m2gConfigChannel2Datarate

Devices the datarate of the second TDM channel (port 2)

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1gEth
2	ms1xFc

.1.3.6.1.4.1.3181.10.6.1.94.8.1.3

m2gConfigPort1CopperSfp

Set when local copper RJ45 SFP is used and connection cannot be established.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.8.1.4

m2gConfigPort2CopperSfp

Set when local copper RJ45 SFP is used and connection cannot be established.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.8.1.5

m2gConfigSfpDeltaInterval

This enables and defines the interval in which the optical receive power level of each SFP/XFP is read and compared to previous value.

Enumerationr/w

Enumerated Values:

0	disabled
1	ms1Sec
2	ms5Sec
3	ms10Sec
4	ms30Sec
5	ms60Sec
6	ms240Sec

.1.3.6.1.4.1.3181.10.6.1.94.8.1.6

m2gConfigSfpDeltaThreshold

This defines how much the optical receive power level can differ between successive reads before a warning trap is generated.

Enumerationr/w

Enumerated Values:

0	ms05Db
1	ms1Db
2	ms15Db
3	ms2Db
4	ms3Db
5	ms5Db

.1.3.6.1.4.1.3181.10.6.1.94.8.1.7

m2gConfigLinkBackupTrigger

Defines under which optical signal condition an automated backup is initiated.

Enumerationr/w

Enumerated Values:

0	disabled
1	signalLoss
2	errorBurst

.1.3.6.1.4.1.3181.10.6.1.94.8.1.8

m2gConfigStayWithLastLink

When set the backup switch remains in last position even when signal returns. Still the backup warning turns off after the delay set under backup_end parameter expires.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.8.1.9

m2gConfigBackupEnd

Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.

Enumerationr/w

Enumerated Values:

0	noDelay
1	ms15Seconds
2	ms15Minutes
3	manually

.1.3.6.1.4.1.3181.10.6.1.94.8.1.10

m2gConfigPermitLinkOverride

Permits the manual selection of a failed link using the link selection. Defaults to false to safeguard against accidential link selection which would result in loss of connection.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.8.1.11

om1ConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.9 · 1 row entry · 8 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk om1ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::om1ConfigTable'

om1ConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.9.1

Indexes

om1ConfigIndex

Column Syntax OID

om1ConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.9.1.1

om1ConfigWavelengthPortA

Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.

Enumerationr/w

Enumerated Values:

0	ms1550nm
1	ms1310nm
3	disabled

.1.3.6.1.4.1.3181.10.6.1.94.9.1.2

om1ConfigLowThresholdPortA

Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.9.1.3

om1ConfigHighThresholdPortA

Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.9.1.4

om1ConfigWavelengthPortB

Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.

Enumerationr/w

Enumerated Values:

0	ms1550nm
1	ms1310nm
3	disabled

.1.3.6.1.4.1.3181.10.6.1.94.9.1.5

om1ConfigLowThresholdPortB

Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.9.1.6

om1ConfigHighThresholdPortB

Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.9.1.7

om1ConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.9.1.8

lp1ConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.10 · 1 row entry · 11 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk lp1ConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::lp1ConfigTable'

lp1ConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.10.1

Indexes

lp1ConfigIndex

Column Syntax OID

lp1ConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.10.1.1

lp1ConfigWavelengthPortA

Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.

Enumerationr/w

Enumerated Values:

0	ms1550nm
1	ms1310nm
3	disabled

.1.3.6.1.4.1.3181.10.6.1.94.10.1.2

lp1ConfigLowThresholdPortA

Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.10.1.3

lp1ConfigHighThresholdPortA

Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.10.1.4

lp1ConfigWavelengthPortB

Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.

Enumerationr/w

Enumerated Values:

0	ms1550nm
1	ms1310nm
3	disabled

.1.3.6.1.4.1.3181.10.6.1.94.10.1.5

lp1ConfigLowThresholdPortB

Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event and a backup when configured.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.10.1.6

lp1ConfigHighThresholdPortB

Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event and a backup when configured.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.10.1.7

lp1ConfigBackupCriteria

Defines under which optical signal condition an automated backup is initiated.

Enumerationr/w

Enumerated Values:

0	signalLow
1	signalHigh
2	manually

.1.3.6.1.4.1.3181.10.6.1.94.10.1.8

lp1ConfigStayWithLastLink

When set the backup switch remains in last position even when signal return. Still the backup warning turns off after the delay set under backup_end parameter expires.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.3181.10.6.1.94.10.1.9

lp1ConfigBackupEnd

Defines how long the signal must remain steady before proper operation is assumed and the backup is terminated.

Enumerationr/w

Enumerated Values:

0	noDelay
1	ms15Seconds
2	ms15Minutes
3	manually

.1.3.6.1.4.1.3181.10.6.1.94.10.1.10

lp1ConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.10.1.11

emConfigTable

table

.1.3.6.1.4.1.3181.10.6.1.94.11 · 1 row entry · 10 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk emConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::emConfigTable'

Configuration for EDFA amplifier modules EM2 and EM3.

emConfigEntry row .1.3.6.1.4.1.3181.10.6.1.94.11.1

Indexes

emConfigIndex

Column Syntax OID

emConfigIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.11.1.1

emConfigEdfaOperationMode

Defines which wavelength band is measured. Use 1550 setting when a WDM link is measured.

Enumerationr/w

Enumerated Values:

0	preAmp
1	booster
3	pumpDisabled

.1.3.6.1.4.1.3181.10.6.1.94.11.1.2

emConfigLossOfSignalHandling

Defines if loss of input signal turns off the EDFA pump (PERCOLATE) or not (LOCAL)

Enumerationr/w

Enumerated Values:

0	local
1	percolate

.1.3.6.1.4.1.3181.10.6.1.94.11.1.3

emConfigSignalGain

Desired signal gain in dB.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.4

emConfigMaxOutputPower

Maximum output power permitted to exit the module.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.5

emConfigLowThresholdEdfaIn

This corresponds to the unamplified input signal before entering the EDFA section. Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.6

emConfigHighThresholdEdfaIn

This corresponds to the unamplified input signal before entering the EDFA section. Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.7

emConfigLowThresholdPortB

Port B is the unamplified return path through the module. Defines the lower optical signal level in dBm. A signal level below this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.8

emConfigHighThresholdPortB

Port B is the unamplified return path through the module. Defines the upper optical signal level in dBm. A signal level above this threshold will trigger an event.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.11.1.9

emConfigFrontPanelMode

Determines what is displayed on the front panel, when available. Also controls the modules local buttons.

Enumerationr/w

Enumerated Values:

0	normal
1	extended
4	normalLocked
5	extendedLocked
7	remote

.1.3.6.1.4.1.3181.10.6.1.94.11.1.10

moduleControlTable

table

.1.3.6.1.4.1.3181.10.6.1.94.12 · 1 row entry · 18 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk moduleControlTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::moduleControlTable'

moduleControlEntry row .1.3.6.1.4.1.3181.10.6.1.94.12.1

Indexes

moduleControlIndex

Column	Syntax	OID
moduleControlIndex Automatically generated	Integer32 Constraints: `range: 0-11`	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.1`
moduleControlEnterPassword This command will set the module password. Only required when the nms_operation_mode is set to passive mode. Enter the password before configuration or actions can be accepted by the module.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.2`
moduleControlRebootModule This command will restart the module. All communication will be disrupted! Syntax: reboot_module = CONFIRM.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.3`
moduleControlWarmStart This command will warm start the module. Communication shall not be disrupted. (Firmware dependend) Syntax: warm_start = CONFIRM.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.4`
moduleControlClearCounter This command will clear all module and port related statistics counter.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.5`
moduleControlSwitchOffBackup For a module that supports backup and which currently is in backup condition this command will revert to normal operation. If this would disrupt traffic a warning is returned and nothing is executed. To override this wa…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.6`
moduleControlSwitchToBackup For a module that supports backup this command will switch to the backup link. If this would disrupt traffic because backup link is not available a warning is returned and nothing is executed. To override this warning a…	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.7`
moduleControlAutomaticBackup This command returns a manually overridden backup module to normal automatic mode. No parameter are required.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.8`
moduleControlWriteDisplay Writes to the front panel display of the module. Only for modules that offer a front panel display.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.9`
moduleControlLedTest This will start the modules LED test and will return the LED back up automatic mode after a few seconds. May be also be used to identify a certain module.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.10`
moduleControlLoopOff Turns all loops off	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.11`
moduleControlLoopPort1 Tries to engage a loop at port 1. Note not all modules support loops. View port status to check success.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.12`
moduleControlLoopPort2 Tries to engage a loop at port 2. Note not all modules support loops. View port status to check success.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.13`
moduleControlLoopPort3 Tries to engage a loop at port 3. Note not all modules support loops. View port status to check success.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.14`
moduleControlLoopPort4 Tries to engage a loop at port 4. Note not all modules support loops. View port status to check success.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.15`
moduleControlBertRestart Resynchronizes BERT. Only has an effect if a BERT is available on the module and configured to be active.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.16`
moduleControlBertInsertError Inserts an error in the data pattern. This can be used to confirm that a BERT is actually operating. Only has an effect if a BERT is available on the module and configured to be active.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.17`
moduleControlBertClearCounter Clears the BERT counter. Only has an effect if a BERT is available on the module and configured to be active.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.3181.10.6.1.94.12.1.18`

systemStatusTable

table

.1.3.6.1.4.1.3181.10.6.1.94.100 · 1 row entry · 7 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk systemStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::systemStatusTable'

systemStatusEntry row .1.3.6.1.4.1.3181.10.6.1.94.100.1

Indexes

systemStatusIndex

Column Syntax OID

systemStatusIndex

Automatically generated

Integer32

Constraints:
range: 0-0

.1.3.6.1.4.1.3181.10.6.1.94.100.1.1

systemStatusAnyErrorCondition

True when any error condition is currently present in any module.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.100.1.2

systemStatusAnyTestMode

True when any module is in loopback test or has a backup engaged.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.100.1.3

systemStatusAnySparePart

True when any module is marked as spare part.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.100.1.4

systemStatusUsedNodeId

Actually used node id as discovered from device

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.100.1.5

systemStatusLocalRack

Indicates in which rack the mangement module over which this information is retrieved is inserted.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.100.1.6

systemStatusLocalSlot

Indicates in which slot the mangement module over which this information is retrieved is inserted.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.100.1.7

moduleInventoryTable

table

.1.3.6.1.4.1.3181.10.6.1.94.101 · 1 row entry · 19 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk moduleInventoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::moduleInventoryTable'

moduleInventoryEntry row .1.3.6.1.4.1.3181.10.6.1.94.101.1

Indexes

moduleInventoryIndex

Column Syntax OID

moduleInventoryIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.101.1.1

moduleInventoryExpectedModule

Name of module configured for this slot.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.2

moduleInventoryModule

Name of module actually discovered in this slot. This name should be equal to the above name otherwise configuration may not apply properly.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.3

moduleInventoryType

General functional type of module inserted.

Enumeration

Enumerated Values:

0	empty
1	unknown
2	transponder
3	measurement
4	amplifier
5	management
6	passive
7	occupied

.1.3.6.1.4.1.3181.10.6.1.94.101.1.4

moduleInventoryBoardCode

Internal code of actually inserted module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3181.10.6.1.94.101.1.5

moduleInventoryAdditionalInfo

Additional information that may be saved in some modules during production.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.6

moduleInventorySerialNumber

Serial number as stored within the hardware.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.7

moduleInventoryOccupiedSlots

Number of slots taken by this module. Usually 1.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.101.1.8

moduleInventoryProjectNumber

Internal hardware project number

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.9

moduleInventoryBuildVersion

Precise build code for hardware version tracking.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.10

moduleInventoryProductionDate

Production data of the module

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.11

moduleInventoryMfgTestInfo

Internal information for quality management. Manufacturing Site / Test Site / Test Person

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.12

moduleInventoryNumberOfOpticalPorts

Indicates the number of actively monitored optical ports of this type of module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3181.10.6.1.94.101.1.13

moduleInventoryNumberOfSfpPorts

Indicates the number of optical SFP or SFP+ ports of this type of module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3181.10.6.1.94.101.1.14

moduleInventoryNumberOfXfpPorts

Indicates the number of optical XFP ports of this type of module.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3181.10.6.1.94.101.1.15

moduleInventoryCoreFirmwareVersion

Core operating system software version.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.16

moduleInventoryCoreFirmwareDate

Core operating system software creation date.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.17

moduleInventoryApplFirmwareVersion

Application software version.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.18

moduleInventoryApplFirmwareDate

Application software creation date.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.101.1.19

moduleStatusTable

table

.1.3.6.1.4.1.3181.10.6.1.94.102 · 1 row entry · 13 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk moduleStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::moduleStatusTable'

This table holds a record for each module in the system. Note that not all modules deliver every kind of status.

moduleStatusEntry row .1.3.6.1.4.1.3181.10.6.1.94.102.1

Indexes

moduleStatusIndex

Column Syntax OID

moduleStatusIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.102.1.1

moduleStatusModule

Name of module actually discovered in this slot.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.102.1.2

moduleStatusSystemOk

True when the module has booted and appears ok.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.102.1.3

moduleStatusErrorCondition

True when any error condition is currently present.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.102.1.4

moduleStatusTestMode

True when module is in loopback test or a backup is engaged.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.102.1.5

moduleStatusSparePart

True when module is marked as spare part.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.102.1.6

moduleStatusUptime

Uptime since last reboot in seconds.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.102.1.7

moduleStatusTimeSinceCounterReset

How long ago have the statistics counter been restarted.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.102.1.8

moduleStatusTemperature

Temperature value in centigrade.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.3181.10.6.1.94.102.1.9

moduleStatusTooHot

True when module is running too hot.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.102.1.10

moduleStatusBackupState

Indicates if a backup is active and in which state.

Bits

Enumerated Values:

0	disrupted
1	backup
2	awaitSwitchback
3	manual

.1.3.6.1.4.1.3181.10.6.1.94.102.1.11

moduleStatusBackupCounter

Counts the number of times this module has initiated a backup (if backup feature is available for this module type).

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.102.1.12

moduleStatusBackupDuration

How long the backup has been activated in total since last value reset.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.102.1.13

portStatusTable

table

.1.3.6.1.4.1.3181.10.6.1.94.103 · 1 row entry · 19 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk portStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::portStatusTable'

This table holds a record for each optical port of the system. Note that not all modules deliver every kind of statistic.

portStatusEntry row .1.3.6.1.4.1.3181.10.6.1.94.103.1

Indexes

portStatusPortIndex

Column Syntax OID

portStatusPortIndex

Automatically generated

Integer32

Constraints:
range: 0-47

.1.3.6.1.4.1.3181.10.6.1.94.103.1.1

portStatusModule

Name of module in which this port is present.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.2

portStatusLocation

Textual description of port location.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.3

portStatusSnmpPort

Slot and port representation as used in SNMP. Formula is Slot*10000 + Port*10.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.4

portStatusAlias

Configured alias nickname of this port.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.5

portStatusAdminStatus

Reflects the administrative setting of this port.

Enumeration

Enumerated Values:

0	none
1	up
2	down
3	testing

.1.3.6.1.4.1.3181.10.6.1.94.103.1.6

portStatusOperStatus

Indicates the combined operation port status.

Enumeration

Enumerated Values:

0	none
1	up
2	down
3	testing

.1.3.6.1.4.1.3181.10.6.1.94.103.1.7

portStatusDetailedStatus

Indicates detailed issues related to the port.

Bits

Enumerated Values:

0	disabled
1	sfpMissing
2	pllNotLocked
3	signalLow
4	tooHigh
5	laserOff
6	loop
7	reserved
8	unknown
9	none

.1.3.6.1.4.1.3181.10.6.1.94.103.1.8

portStatusPortDatarate

Reflects the data rate setting of this port.

Enumeration

Enumerated Values:

0	none
1	txp
2	ms100mEth
3	ms1gEth
4	ms10gEth
10	ms1xFc
11	ms2xFc
12	ms4xFc
13	ms8xFc
14	ms10xFc
15	ms16xFc
20	oc3
21	oc12
22	oc48
23	oc192
30	otu1
31	otu1e
32	otu1f
33	otu2
34	otu2e
35	otu2f
40	fix100
41	escon
42	sdi
43	hdtv
44	tdm2
45	other

.1.3.6.1.4.1.3181.10.6.1.94.103.1.9

portStatusUpdateTimeStamp

Indicates the time when this record was last updated.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.10

portStatusTimeSinceValueReset

Time since when the following statistics have been accumulated. They restart upon module power up or on forced value reset.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.11

portStatusTimeSinceLastError

Time since last input signal loss or input signal too high.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.12

portStatusTimeSignalTooLow

Total time the input signal was below threshold.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.13

portStatusSignalTooLowCounter

Number of times a transition to signal too low has occured.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.14

portStatusTimeSignalTooHigh

Total time the input signal was above high threshold.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.15

portStatusSignalTooHighCounter

Number of times a transition to signal too high has occured.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.103.1.16

portStatusLowThreshold

Defined signal too low threshold.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.17

portStatusCurrentInputSignal

Actual current signal level.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.18

portStatusHighThreshold

Defined signal too high threshold.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.103.1.19

emStatusTable

table

.1.3.6.1.4.1.3181.10.6.1.94.104 · 1 row entry · 16 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk emStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::emStatusTable'

Optical amplifier status

emStatusEntry row .1.3.6.1.4.1.3181.10.6.1.94.104.1

Indexes

emStatusIndex

Column Syntax OID

emStatusIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.104.1.1

emStatusSystemOk

True when no errors are present

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.3181.10.6.1.94.104.1.2

emStatusErrors

Indicates various optical error conditions.

Bits

Enumerated Values:

0	lossOfInput
1	lossOfOutput
2	tooHot
3	eyeSafetyShutdown
4	backReflection
5	powerLimit
6	overCurrent
7	pumpDown

.1.3.6.1.4.1.3181.10.6.1.94.104.1.3

emStatusHardwareCode

Details codes about the installed hardware components.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.4

emStatusTimeSincePowerError

How long ago since the last time the output power was in error condition.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.104.1.5

emStatusTimeWithPowerLoss

Accumulated time the output power has been down.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.104.1.6

emStatusInputSignalLowCounter

Number of times a loss of signal has occured.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.104.1.7

emStatusInputPower

Optical input power of port A.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.8

emStatusSignalGain

Indicates how strong the input signal is amplified.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.9

emStatusOptimalFlatGain

Indicates the best gain setting for an even amplification accross the wavelength channels

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.10

emStatusBackReflection

The value should be low and indicates cable issues if not.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.11

emStatusSignalOutputPower

Indicated the actually achieved optical signal output power.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.12

emStatusTotalOutputPower

Indicated the actually achieved optical output power leaving the module (including noise).

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.13

emStatusMinOutputPower

Indicates the minimum optical output level that must be send out

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.14

emStatusMaxOutputPower

Indicates the maximum optical output level that can be send out

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.15

emStatusCfgOutputPower

Indicated the desired configured optical output power

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.104.1.16

bertStatusTable

table

.1.3.6.1.4.1.3181.10.6.1.94.105 · 1 row entry · 11 columns

Open in standard view

Uses the microsens variant from /opt/observium/mibs/microsens.

Command help

Walk bertStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-MSP1000-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-MSP1000-MIB::bertStatusTable'

Displays the results of the bit error rate tester (BERT) if it is present and enabled in a slot

bertStatusEntry row .1.3.6.1.4.1.3181.10.6.1.94.105.1

Indexes

bertStatusIndex

Column Syntax OID

bertStatusIndex

Automatically generated

Integer32

Constraints:
range: 0-11

.1.3.6.1.4.1.3181.10.6.1.94.105.1.1

bertStatusLocation

Textual description of BERT port location.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.105.1.2

bertStatusBertOperation

Indicates the general bit error rate tester operational status.

Enumeration

Enumerated Values:

0	unused
1	inSync
2	wasOutOfSync
3	outOfSync

.1.3.6.1.4.1.3181.10.6.1.94.105.1.3

bertStatusTotalErrors

Number of errored bits. Only valid when BERT is synchronized.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.105.1.4

bertStatusTimeSinceLastError

Seconds elapsed since the last error was detected.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.105.1.5

bertStatusTotalTestTime

Accumulated time how long the test was run since last value clear.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.105.1.6

bertStatusErroredTime

Accumulated seconds in which at least on errored bit was detected.

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.3181.10.6.1.94.105.1.7

bertStatusBitErrorRate

Averaged bit error rate during test interval.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.105.1.8

bertStatusBerSinceLastError

Bit error rate since last error.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.105.1.9

bertStatusTheoreticalBer

Theoretical best possible error rate in the given time frame of the current test interval.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.105.1.10

bertStatusAvailability

Relation of transmitted vs. Errored bits.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.3181.10.6.1.94.105.1.11