FSS-ETHERNET-INTERFACE Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
26

ethernet-dataTable

table
.1.3.6.1.4.1.211.1.24.12.700.100.1 · 1 row entry · 26 columns
Open in standard view
Uses the fujitsu variant from /opt/observium/mibs/fujitsu.
Command help
Walk ethernet-dataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FSS-ETHERNET-INTERFACE' -M '/opt/observium/mibs/fujitsu:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FSS-ETHERNET-INTERFACE::ethernet-dataTable'
ethernet-dataEntry row .1.3.6.1.4.1.211.1.24.12.700.100.1.1
Indexes
No indexes recorded
Column Syntax OID
ethernetAdmin-status
 Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.1
ethernetRate
Set rate - units kbps.
Unsigned32r/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.2
ethernetFec
Forward Error Correction Choices.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.3
ethernetLoopback
loopback operation and release
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.4
ethernetLocation
Set Loopback Location.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.5
ethernetType
Set Loopback type (or direction).
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.6
ethernetOper-status
 Enumeration .1.3.6.1.4.1.211.1.24.12.700.100.1.1.7
ethernetTestsignal
testsignal connect and disconnect
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.8
ethernetTestPattern
Set test signal pattern
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.9
ethernetTestsignal-type
Set test signal type (or direction).
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.10
ethernetBitErrors
bit errors for test signal in facility direction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.211.1.24.12.700.100.1.1.11
ethernetBitErrorsTerminal
bit errors for test signal in terminal direction.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.211.1.24.12.700.100.1.1.12
ethernetSyncSeconds
number of seconds the received facility test signal is in sync.
String .1.3.6.1.4.1.211.1.24.12.700.100.1.1.13
ethernetSyncSecondsTerminal
number of seconds the received terminal test signal is in sync.
String .1.3.6.1.4.1.211.1.24.12.700.100.1.1.14
ethernetSpeed
Set speed of the interface, unit mbps.
This is for ETH facility.
Editable when not part of a LAG.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.211.1.24.12.700.100.1.1.15
ethernetDuplex
Set duplex selections.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.16
ethernetMtu
Set Maximum Frame Size.
Unsigned32r/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.17
ethernetAuto-negotiation
Set Auto Negotiation: Enabled/Disabled.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.18
ethernetAct-laser
actual transmit laser status
Enumeration .1.3.6.1.4.1.211.1.24.12.700.100.1.1.19
ethernetTsf
Codeword to send during Transport Signal Failure
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.20
ethernetBtsf
Codeword to send during Backward Transport Signal Failure
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.21
ethernetLtxoff
LTXOFF Choices
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.22
ethernetDirection
direction Choices
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.23
ethernetOper-duplex
Get duplex
String .1.3.6.1.4.1.211.1.24.12.700.100.1.1.24
ethernetOper-speed
Get Speed
String .1.3.6.1.4.1.211.1.24.12.700.100.1.1.25
ethernetWavelength
Wavelength
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.211.1.24.12.700.100.1.1.26