FS-RS485-CLASS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
40
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13 · 1 row entry · 7 columns
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsRs485VlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-RS485-CLASS-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-RS485-CLASS-MIB::fsRs485VlanTable'
Vlan for Rs485 serial port use.
fsRs485VlanEntry row .1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1
Entry contains Rs485 serial port number
and corresponding VLAN.
Column Syntax OID
The serial number of Rs485.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.1
The VLAN of Rs485 serial port use.
Integer32r/w
Constraints:
range: 2-4094
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.2
The baud rate of Rs485 serial port use.
Integer32r/w
Constraints:
range: 200-999999
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.3
The parity of Rs485 serial port use.
Enumerationr/w
Enumerated Values:
1none
2odd
3even
4mark
5space
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.4
The serial port type of controller.
Enumeration
Enumerated Values:
0rs485
1rs232
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.5
The status of serial port use.
Enumeration
Enumerated Values:
0normal
1unnormal
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.6
The serial port is used for wireless remote control.
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.52642.1.1.10.2.149.1.13.1.7

fsSSIfTable

table
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14 · 1 row entry · 7 columns
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsSSIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-RS485-CLASS-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-RS485-CLASS-MIB::fsSSIfTable'
List interface configuration of Switch Smart.
fsSSIfEntry row .1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1
Entry contains interface configuration.
Indexes
Column Syntax OID
The interface index of switch smart.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.1
The VLAN whitch the interface belongs to.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.2
The native vlan of the interface.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.3
Enable trunk of the interface.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.4
Speed set of the interface.
Enumerationr/w
Enumerated Values:
0speed_10M
1speed_100M
2speed_1000M
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.5
Duplex set of the interface.
Enumerationr/w
Enumerated Values:
0half
1full
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.6
Enable negotiation of the interface.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.52642.1.1.10.2.149.1.14.1.7
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19 · 1 row entry · 7 columns
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsLabelInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-RS485-CLASS-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-RS485-CLASS-MIB::fsLabelInfoTable'
Label information table.
fsLabelInfoEntry row .1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1
Entry contains Label information.
Column Syntax OID
The Label type.
Enumeration
Enumerated Values:
0unknown
1rfid
2ble
3zigbee
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.1
The Label ID.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.2
The Label active or deactive command.
Enumerationr/w
Enumerated Values:
0unknown
1active
2deactive
3active-success-ack
4active-fail-ack
5deactive-success-ack
6deactive-fail-ack
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.3
The Label power status.
Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.4
Cancel Trap warning.
Enumerationr/w
Enumerated Values:
0unknown
1cancel-stolen
2cancel-power
3cancel-unnormal
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.5
Apply unreg Label.
Enumerationr/w
Enumerated Values:
0unknown
1apply-unreg
2unreg
3allow-unreg
4not-allow-unreg
5reg-success
6reg-failed
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.6
Show label status.
Enumeration
Enumerated Values:
0unknown
1normal
2stolen
3unnormal
.1.3.6.1.4.1.52642.1.1.10.2.149.1.19.1.7
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27 · 1 row entry · 19 columns
Uses the fscom variant from /opt/observium/mibs/fscom.
Command help
Walk fsClassDeviceInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FS-RS485-CLASS-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FS-RS485-CLASS-MIB::fsClassDeviceInfoTable'
Class Device information table.
fsClassDeviceInfoEntry row .1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1
Entry contains Class Device information.
Column Syntax OID
Device type.
Enumeration
Enumerated Values:
0unknown
1video
2audio
3videoandaudio
4light
5air-con
6record
7projector
8screen
9app-pad
10smart-switch
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.1
Device ID.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.2
Device icon type the APP used.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.3
Device name.
OctetStringr/w
Constraints:
range: 0-20
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.4
Device model ID.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.5
Control serial port.
Integer32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.6
Tele control port.
Integer32r/w
Constraints:
range: 0-10
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.7
Device input or output type.
Enumerationr/w
Enumerated Values:
0input
1output
2other
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.8
Video port.
Integer32r/w
Constraints:
range: 0-4
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.9
Audio port.
Integer32r/w
Constraints:
range: 0-4
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.10
Video used status.
Enumerationr/w
Enumerated Values:
0unused
1used
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.11
Audio used status.
Enumerationr/w
Enumerated Values:
0unused
1used
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.12
Device switch status.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.13
Device communicate state.
Enumerationr/w
Enumerated Values:
0default
1normal
2no-ack
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.14
Device value config status.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.15
Device info set status.
Enumerationr/w
Enumerated Values:
0unset
1set
2delete
3update
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.16
The ip address of the device.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.17
Device Switch bind device id .
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.18
Device whether support batch or not.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.52642.1.1.10.2.149.1.27.1.19