FS-RIP-MIB Table View

A list of subnets which require separate
status monitoring in RIP.

fsRipIfStatEntry row .1.3.6.1.4.1.52642.1.1.10.2.13.1.6.1

A Single Routing Domain in a single Subnet.

Indexes

fsRipIfStatIfIndex

Column	Syntax	OID
fsRipIfStatIfIndex VID of vlan which each net interface associate.	FS-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.13.1.6.1.1
fsRipIfStatRcvBadPackets The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.13.1.6.1.2
fsRipIfStatRcvBadRoutes The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.13.1.6.1.3
fsRipIfStatSentUpdates The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.1.1.10.2.13.1.6.1.4

A list of interfaces which require separate
configuration in RIP.

fsRipIfConfEntry row .1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1

A Single Routing Domain in a single interface.

Indexes

fsRipIfConfIfIndex

Column	Syntax	OID
fsRipIfConfIfIndex IfIndex vale of vlan interface.	FS-TCIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.1
fsRipIfConfAuthType The type of Authentication used on this interface.	Enumerationr/w Enumerated Values: 1 noAuthentication 2 simplePassword 3 md5	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.2
fsRipIfConfAuthKeyChain The key chain name which interface associated. It indicate that this interface doesn't match any key chain which this string is null	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.3
fsRipIfConfSend What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implie…	Enumerationr/w Enumerated Values: 1 ripVersion1 2 rip1Compatible 3 ripVersion2	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.4
fsRipIfConfReceive This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.	Enumerationr/w Enumerated Values: 1 rip1 2 rip2 3 rip1OrRip2	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.5
fsRipIfPassiveStatus The interface will not send routing updates if this value is 'enabled'	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.6
fsRipIfBroadcastEnable Enable or disable broadcast updats of RIP in this interface	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.7
fsRipIfAdminStat The RIP interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is externa…	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52642.1.1.10.2.13.1.7.1.8

The interface configuration about offset.
Apply an offset list to routing metrics to increase incoming and 
outgoing metrics to routes learned through RIP. You can limit 
the offset list with an access list or an interface.

fsRipIfOffsetEntry row .1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1

the entry of this table.

Indexes

fsRipIfOffsetIfIndex fsRipIfOffsetMethod

Column	Syntax	OID
fsRipIfOffsetIfIndex the interface that this offset list apply to. If this value is 0,it indicate that this offset list apply in all interfaces except the interfaceswhich which have not Offset configure. Other…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1.1
fsRipIfOffsetMethod the offset list apply to incoming routes or outgoing routes.	Enumeration Enumerated Values: 1 out 2 in	.1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1.2
fsRipIfOffsetAclName the offset list with Access list name .	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1.3
fsRipIfOffsetMetric the offset list with offset value, in condition the value will be added to route metric.	Unsigned32r/w Constraints: range: 0-16	.1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1.4
fsRipIfOffsetStatus if this value is setted destroy, the entry will be deleted .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.13.1.13.1.5

the network for rip routing.

fsRipNetworkEntry row .1.3.6.1.4.1.52642.1.1.10.2.13.1.14.1

the entry of this table.

Indexes

fsRipNetworkAddr

Column	Syntax	OID
fsRipNetworkAddr define a network for rip routing .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.13.1.14.1.1
fsRipNetworkMask define a network's mask for rip routing .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.13.1.14.1.2
fsRipNetworkStatus if destroy is setted, this entry will be deleted .	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.13.1.14.1.3

the neighbor for rip routing.

fsRipNeighborEntry row .1.3.6.1.4.1.52642.1.1.10.2.13.1.15.1

the entry of this table.

Indexes

fsRipNeighborIndex

Column	Syntax	OID
fsRipNeighborIndex define a neighbor for rip .	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.1.1.10.2.13.1.15.1.1
fsRipNeighborStatus if destroy is setted, this entry will be deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52642.1.1.10.2.13.1.15.1.2