FS-NMS-QOS-PIB-MIB Table View

This class contains a single policy instance that identifies
the current incarnation of the PIB and the PDP that installed
this incarnation.  The instance of this class is reported to
the PDP at client connect time so that the PDP can (attempt
to) ascertain the current state of the PIB.

qosDevicePibIncarnationEntry row .1.3.6.1.4.1.52642.18.2.1.2.1.1

The single policy instance of this class identifies the
current incarnation of the PIB and the PDP that installed
this incarnation.

Indexes

qosDeviceIncarnationId

Column	Syntax	OID
qosDeviceIncarnationId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.2.1.1.1
qosDevicePdpName The name of the PDP that installed the current incarnation of the PIB into the device. By default it is the zero length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.18.2.1.2.1.1.2
qosDevicePibIncarnation An octet string to identify the current incarnation. It has meaning to the PDP that installed the PIB and perhaps its standby PDPs. By default the empty string.	OctetString Constraints: range: 128-128	.1.3.6.1.4.1.52642.18.2.1.2.1.1.3
qosDevicePibTtl The number of seconds after a client close or TCP timeout for which the PEP continues to enforce the policy in the PIB. After this interval, the PIB is consired expired and the device no longer enforces the policy insta…	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.2.1.1.4

The single instance of this class indicates specific
attributes of the device.  These include configuration values
such as the configured PDP addresses, the maximum message
size, and specific device capabilities.  The latter include
input port-based and output port-based classification and/or
policing, support for flow based policing, aggregate based
policing, traffic shaping capabilities, etc.

qosDeviceAttributeEntry row .1.3.6.1.4.1.52642.18.2.1.2.2.1

The single instance of this class indicates specific
attributes of the device.

Indexes

qosDeviceAttributeId

Column	Syntax	OID
qosDeviceAttributeId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.2.2.1.1
qosDevicePepDomain The QoS domain that this device belongs to. This is configured locally on the device (perhaps by some management protocol such as SNMP). By default, it is the zero-length string.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52642.18.2.1.2.2.1.2
qosDevicePrimaryPdp The address of the PDP configured to be the primary PDP for the device.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.2.2.1.3
qosDeviceSecondaryPdp The address of the PDP configured to be the secondary PDP for the device. An address of zero indicates no secondary is configured.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.2.2.1.4
qosDeviceMaxMessageSize The maximum size message that this PEP is capable of receiving in bytes. A value of zero means that the maximum message size is unspecified (but does not mean it is unlimited). A message greater than this maximum resu…	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.2.2.1.5
qosDeviceCapabilities An enumeration of device capabilities. Used by the PDP to select policies and configuration to push to the PEP.	Bits Enumerated Values: 0 unspecified 1 layer2Cos 2 ipPrecedence 3 dscp	.1.3.6.1.4.1.52642.18.2.1.2.2.1.6

This class describes the interface types of the interfaces
that exist on the device.  It includes the queue type, role
combination and capabilities of interfaces.  The PEP does not
report which specific interfaces have which characteristics.

qosInterfaceTypeEntry row .1.3.6.1.4.1.52642.18.2.1.2.3.1

An instance of this class describes a role combination for
an interface type of an interface that exists on the device.

Indexes

qosInterfaceTypeId

Column	Syntax	OID
qosInterfaceTypeId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.2.3.1.1
qosInterfaceQueueType The interface type in terms of number of queues and thresholds.	QosInterfaceQueueType Type Values: 1 oneQ1t 2 oneQ2t 3 oneQ4t 4 oneQ8t 5 twoQ1t 6 twoQ2t 7 twoQ4t 8 twoQ8t 9 threeQ1t 10 threeQ2t 11 threeQ4t 12 threeQ8t 13 fourQ1t 14 fourQ2t 15 fourQ4t 16 fourQ8t 17 eightQ1t 18 eightQ2t 19 eightQ4t 20 eightQ8t 21 sixteenQ1t 22 sixteenQ2t 23 sixteenQ4t 24 sixtyfourQ1t 25 sixtyfourQ2t 26 sixtyfourQ4t 27 oneP1Q0t 28 oneP1Q4t 29 oneP1Q8t 30 oneP2Q1t 31 oneP2Q2t 32 oneP3Q1t 33 oneP7Q8t Description: An enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.…	.1.3.6.1.4.1.52642.18.2.1.2.3.1.2
qosInterfaceTypeRoles A combination of roles on at least one interface of type qosInterfaceType.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.2.3.1.3
qosInterfaceTypeCapabilities An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP.	QosInterfaceTypeCapabilities Type Values: 0 unspecified 1 inputL2Classification 2 inputIpClassification 3 outputL2Classification 4 outputIpClassification 5 inputUflowPolicing 6 inputAggregatePolicing 7 outputUflowPolicing 8 outputAggregatePolicing 9 policeByMarkingDown 10 policeByDropping 11 fifo 12 wrr 13 wfq 14 cq 15 pq 16 cbwfq 17 tailDrop 18 wred 19 inputPortClassification 20 outputPortClassification 21 inputUflowShaping 22 inputAggregateShaping 23 outputUflowShaping 24 outputAggregateShaping 25 pqWrr 26 pqCbwfq Description: An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP.	.1.3.6.1.4.1.52642.18.2.1.2.3.1.4

Maps each DSCP to a marked-down DSCP.  Also maps each DSCP to
an IP precedence and QosLayer2Cos.  When configured for the
first time, all 64 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted.

qosDiffServMappingEntry row .1.3.6.1.4.1.52642.18.2.1.3.1.1

An instance of this class represents mappings from a DSCP.

Indexes

qosDscp

Column	Syntax	OID
qosDscp A DSCP for which this entry contains mappings.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.3.1.1.1
qosMarkedDscp The DSCP to use instead of the qosDscp when the packet is out of profile and hence marked as such.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.3.1.1.2
qosL2Cos The L2 CoS value to use when mapping this DSCP to layer 2 CoS.	QosLayer2Cos Type Constraints: range: 0..7 Description: An integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values.	.1.3.6.1.4.1.52642.18.2.1.3.1.1.3

Maps each of eight CoS values to a DSCP.  When configured for
the first time, all 8 entries of the table must be
specified. Thereafter, instances may be modified (with a
delete and install in a single decision) but not deleted
unless all instances are deleted.

qosCosToDscpEntry row .1.3.6.1.4.1.52642.18.2.1.3.2.1

An instance of this class maps a CoS value to a DSCP.

Indexes

qosCosToDscpCos

Column	Syntax	OID
qosCosToDscpCos The L2 CoS value that is being mapped.	QosLayer2Cos Type Constraints: range: 0..7 Description: An integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values.	.1.3.6.1.4.1.52642.18.2.1.3.2.1.1
qosCosToDscpDscp The DSCP value to use when mapping the L2 CoS to a DSCP.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.3.2.1.2

A policy class that specifies what QoS to apply to a packet
that does not match any other policy configured for this role
combination for a particular direction of traffic.

qosUnmatchedPolicyEntry row .1.3.6.1.4.1.52642.18.2.1.4.1.1

An instance of this class specifies the unmatched policy
for a particular role combination for incoming or outgoing
traffic.

Indexes

qosUnmatchedPolicyId

Column	Syntax	OID
qosUnmatchedPolicyId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.4.1.1.1
qosUnmatchedPolicyRole Role combination for which this instance applies.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.4.1.1.2
qosUnmatchedPolicyDirection The direction of packet flow at the interface in question to which this instance applies.	Enumeration Enumerated Values: 0 in 1 out	.1.3.6.1.4.1.52642.18.2.1.4.1.1.3
qosUnmatchedPolicyDscp The DSCP to classify the unmatched packet with. This must be specified even if qosUnmatchedPolicyDscpTrusted is true.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.4.1.1.4
qosUnmatchedPolicyDscpTrusted If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.18.2.1.4.1.1.5
qosUnmatchPolMicroFlowPolicerId An index identifying the instance of policer to apply to unmatched packets. It must correspond to the integer index of an instance of class qosPolicerTable or be zero. If zero, the microflow is not policed.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.4.1.1.6
qosUnmatchedPolicyAggregateId An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and …	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.4.1.1.7

A class specifying policing parameters for both microflows
and aggregate flows.  This table is designed for policing
according to a token bucket scheme where an average rate and
burst size is specified.

qosPolicerEntry row .1.3.6.1.4.1.52642.18.2.1.5.1.1

An instance of this class specifies a set of policing
parameters.

Indexes

qosPolicerId

Column	Syntax	OID
qosPolicerId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.5.1.1.1
qosPolicerRate The token rate. It is specified in units of bit/s. A rate of zero means that all packets will be out of profile. If the qosPolicerAction is set to drop then this effectively denies any service to packets policed by th…	Unsigned64 Based On: SNMPv2-SMICounter64 Description: An unsigned 64 bit integer. We use SYNTAX Counter64 for the enconding rules.	.1.3.6.1.4.1.52642.18.2.1.5.1.1.2
qosPolicerNormalBurst The normal size of a burst in terms of bits.	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.5.1.1.3
qosPolicerExcessBurst The excess size of a burst in terms of bits.	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.5.1.1.4
qosPolicerAction An indication of how to handle out of profile packets. When the shape action is chosen then traffic is shaped to the rate specified by qosPolicerRate.	Enumeration Enumerated Values: 0 drop 1 mark 2 shape	.1.3.6.1.4.1.52642.18.2.1.5.1.1.5

Instances of this class identify aggregate flows and the
policer to apply to each.

qosAggregateEntry row .1.3.6.1.4.1.52642.18.2.1.5.2.1

An instance of this class specifies the policer to apply to
an aggregate flow.

Indexes

qosAggregateId

Column	Syntax	OID
qosAggregateId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.5.2.1.1
qosAggregatePolicerId An index identifying the instance of policer to apply to the aggregate. It must correspond to the integer index of an instance of class qosPolicerTable.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.5.2.1.2

A class of MAC/Vlan tuples and their associated CoS values.

qosMacClassificationEntry row .1.3.6.1.4.1.52642.18.2.1.6.1.1

An instance of this class specifies the mapping of a VLAN
and a MAC address to a CoS value.

Indexes

qosMacClassificationId

Column	Syntax	OID
qosMacClassificationId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.6.1.1.1
qosDstMacVlan The VLAN of the destination MAC address of the L2 frame.	Integer32 Constraints: range: 1-4095	.1.3.6.1.4.1.52642.18.2.1.6.1.1.2
qosDstMacAddress The destination MAC address of the L2 frame.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52642.18.2.1.6.1.1.3
qosDstMacCos The CoS to assign the packet with the associated MAC/VLAN tuple. Note that this CoS is overridden by the policies to classify the frame at layer 3 if there are any.	QosLayer2Cos Type Constraints: range: 0..7 Description: An integer that is in the range of the layer 2 CoS values. This corresponds to the 802.1p and ISL CoS values.	.1.3.6.1.4.1.52642.18.2.1.6.1.1.4

ACE definitions.

qosIpAceEntry row .1.3.6.1.4.1.52642.18.2.1.7.1.1

An instance of this class specifies an ACE.

Indexes

qosIpAceId

Column	Syntax	OID
qosIpAceId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.1.1.1
qosIpAceDstAddr The IP address to match against the packet's destination IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.7.1.1.2
qosIpAceDstAddrMask A mask for the matching of the destination IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.7.1.1.3
qosIpAceSrcAddr The IP address to match against the packet's source IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.7.1.1.4
qosIpAceSrcAddrMask A mask for the matching of the source IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52642.18.2.1.7.1.1.5
qosIpAceDscpMin The minimum value that the DSCP in the packet can have and match this ACE.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.7.1.1.6
qosIpAceDscpMax The maximum value that the DSCP in the packet can have and match this ACE.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.7.1.1.7
qosIpAceProtocol The IP protocol to match against the packet's protocol. A value of zero means match all.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.52642.18.2.1.7.1.1.8
qosIpAceDstL4PortMin The minimum value that the packet's layer 4 dest port number can have and match this ACE.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52642.18.2.1.7.1.1.9
qosIpAceDstL4PortMax The maximum value that the packet's layer 4 dest port number can have and match this ACE.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52642.18.2.1.7.1.1.10
qosIpAceSrcL4PortMin The minimum value that the packet's layer 4 source port number can have and match this ACE.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52642.18.2.1.7.1.1.11
qosIpAceSrcL4PortMax The maximum value that the packet's layer 4 source port number can have and match this ACE.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.52642.18.2.1.7.1.1.12
qosIpAcePermit If the packet matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this ACE (indirectly through the ACL) is applied to the packet. If the value of t…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.18.2.1.7.1.1.13

A class that defines a set of ACLs each being an ordered list
of ACEs.

qosIpAclDefinitionEntry row .1.3.6.1.4.1.52642.18.2.1.7.2.1

An instance of this class specifies an ACE in an ACL and its
order with respect to other ACEs in the same ACL.

Indexes

qosIpAclDefinitionId

Column	Syntax	OID
qosIpAclDefinitionId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.2.1.1
qosIpAclId An index for this ACL. There will be one instance of policy class qosIpAclDefinition with this integer index for each ACE in the ACL per role combination.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.2.1.2
qosIpAceOrder An integer that determines the position of this ACE in the ACL. An ACE with a given order is positioned in the access contol list before one with a higher order.	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.7.2.1.3
qosIpAclDefAceId This attribute specifies the ACE in the qosIpAceTable that is in the ACL specified by qosIpAclId at the position specified by qosIpAceOrder.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.2.1.4

A class that applies a set of ACLs to interfaces specifying,
for each interface the order of the ACL with respect to other
ACLs applied to the same interface and, for each ACL the
action to take for a packet that matches a permit ACE in that
ACL.  Interfaces are specified abstractly in terms of
interface role combinations.

qosIpAclActionEntry row .1.3.6.1.4.1.52642.18.2.1.7.3.1

An instance of this class applies an ACL to traffic in a
particular direction on an interface with a particular role
combination, and specifies the action for packets which match
the ACL.

Indexes

qosIpAclActionId

Column	Syntax	OID
qosIpAclActionId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.3.1.1
qosIpAclActAclId The ACL associated with this action.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.3.1.2
qosIpAclInterfaceRoles The interfaces to which this ACL applies specified in terms of a set of roles.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.7.3.1.3
qosIpAclInterfaceDirection The direction of packet flow at the interface in question to which this ACL applies.	Enumeration Enumerated Values: 0 in 1 out	.1.3.6.1.4.1.52642.18.2.1.7.3.1.4
qosIpAclOrder An integer that determines the order of this ACL in the list of ACLs applied to interfaces of the specified role combination. An ACL with a given order is positioned in the list before one with a higher order.	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.7.3.1.5
qosIpAclDscp The DSCP to classify the packet with in the event that the packet matches an ACE in this ACL and the ACE is a permit.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.7.3.1.6
qosIpAclDscpTrusted If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosIpAclDscp (qosIpAclDscp is ignored). The pa…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52642.18.2.1.7.3.1.7
qosIpAclMicroFlowPolicerId An index identifying the instance of policer to apply to the microflow. It must correspond to the integer index of an instance of class qosPolicerTableor be zero. If zero, the microflow is not policed.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.3.1.8
qosIpAclAggregateId An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and …	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.7.3.1.9

This class specifies the scheduling preference an interface
chooses if it supports multiple scheduling types.  Higher
values are preferred over lower values.

qosIfSchedulingPreferenceEntry row .1.3.6.1.4.1.52642.18.2.1.8.1.1

An instance of this class specifies a scheduling preference
for a queue-type on an interface with a particular role
combination.

Indexes

qosIfSchedulingPreferenceId

Column	Syntax	OID
qosIfSchedulingPreferenceId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.1.1.1
qosIfSchedulingRoles The combination of roles the interface must have for this policy instance to apply to that interface.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.1.1.2
qosIfSchedulingPreference The preference to use this scheduling discipline and queue type. A higher value means a higher preference. If two disciplines have the same preference the choice is a local decision.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52642.18.2.1.8.1.1.3
qosIfSchedulingDiscipline An enumerate type for all the known scheduling disciplines.	Enumeration Enumerated Values: 1 weightedFairQueueing 2 weightedRoundRobin 3 customQueueing 4 priorityQueueing 5 classBasedWFQ 6 fifo 7 pqWrr 8 pqCbwfq	.1.3.6.1.4.1.52642.18.2.1.8.1.1.4
qosIfSchedulingQueueType The queue type of this preference.	QosInterfaceQueueType Type Values: 1 oneQ1t 2 oneQ2t 3 oneQ4t 4 oneQ8t 5 twoQ1t 6 twoQ2t 7 twoQ4t 8 twoQ8t 9 threeQ1t 10 threeQ2t 11 threeQ4t 12 threeQ8t 13 fourQ1t 14 fourQ2t 15 fourQ4t 16 fourQ8t 17 eightQ1t 18 eightQ2t 19 eightQ4t 20 eightQ8t 21 sixteenQ1t 22 sixteenQ2t 23 sixteenQ4t 24 sixtyfourQ1t 25 sixtyfourQ2t 26 sixtyfourQ4t 27 oneP1Q0t 28 oneP1Q4t 29 oneP1Q8t 30 oneP2Q1t 31 oneP2Q2t 32 oneP3Q1t 33 oneP7Q8t Description: An enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.…	.1.3.6.1.4.1.52642.18.2.1.8.1.1.5

This class specifies the preference of the drop mechanism an
interface chooses if it supports multiple drop mechanisms.
Higher values are preferred over lower values.

qosIfDropPreferenceEntry row .1.3.6.1.4.1.52642.18.2.1.8.2.1

An instance of this class specifies a drop preference for
a drop mechanism on an interface with a particular role
combination.

Indexes

qosIfDropPreferenceId

Column	Syntax	OID
qosIfDropPreferenceId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.2.1.1
qosIfDropRoles The combination of roles the interface must have for this policy instance to apply to that interface.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.2.1.2
qosIfDropPreference The preference to use this drop mechanism. A higher value means a higher preference. If two mechanisms have the same preference the choice is a local decision.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52642.18.2.1.8.2.1.3
qosIfDropDiscipline An enumerate type for all the known drop mechanisms.	Enumeration Enumerated Values: 1 qosIfDropWRED 2 qosIfDropTailDrop	.1.3.6.1.4.1.52642.18.2.1.8.2.1.4

The assignment of each DSCP to a queue and threshold for each
interface queue type.

qosIfDscpAssignmentEntry row .1.3.6.1.4.1.52642.18.2.1.8.3.1

An instance of this class specifies the queue and threshold
set for a packet with a particular DSCP on an interface of
a particular type with a particular role combination.

Indexes

qosIfDscpAssignmentId

Column	Syntax	OID
qosIfDscpAssignmentId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.3.1.1
qosIfDscpRoles The role combination the interface must be configured with.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.3.1.2
qosIfQueueType The interface queue type to which this row applies.	QosInterfaceQueueType Type Values: 1 oneQ1t 2 oneQ2t 3 oneQ4t 4 oneQ8t 5 twoQ1t 6 twoQ2t 7 twoQ4t 8 twoQ8t 9 threeQ1t 10 threeQ2t 11 threeQ4t 12 threeQ8t 13 fourQ1t 14 fourQ2t 15 fourQ4t 16 fourQ8t 17 eightQ1t 18 eightQ2t 19 eightQ4t 20 eightQ8t 21 sixteenQ1t 22 sixteenQ2t 23 sixteenQ4t 24 sixtyfourQ1t 25 sixtyfourQ2t 26 sixtyfourQ4t 27 oneP1Q0t 28 oneP1Q4t 29 oneP1Q8t 30 oneP2Q1t 31 oneP2Q2t 32 oneP3Q1t 33 oneP7Q8t Description: An enumerated type for all the known interface types. The interface types are currently limited to a predefined combination of queues and thresholds such that the product of queues and thresholds does not exceed 64 (i.…	.1.3.6.1.4.1.52642.18.2.1.8.3.1.3
qosIfDscp The DSCP to which this row applies.	Dscp Type Constraints: range: 0..63 Description: An integer that is in the range of the DiffServ codepoint values.	.1.3.6.1.4.1.52642.18.2.1.8.3.1.4
qosIfQueue The queue to which the DSCP applies for the given interface type.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.52642.18.2.1.8.3.1.5
qosIfThresholdSet The threshold set of the specified queue to which the DSCP applies for the given interface type.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.52642.18.2.1.8.3.1.6

A class of lower and upper values for each threshold set in a
queue supporting WRED.  If the size of the queue for a given
threshold is below the lower value then packets assigned to
that threshold are always accepted into the queue.  If the
size of the queue is above upper value then packets are always
dropped.  If the size of the queue is between the lower and
the upper then packets are randomly dropped.

qosIfRedEntry row .1.3.6.1.4.1.52642.18.2.1.8.4.1

An instance of this class specifies threshold limits for a
particular RED threshold of a given threshold set on an
interface and with a particular role combination.

Indexes

qosIfRedId

Column	Syntax	OID
qosIfRedId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.4.1.1
qosIfRedRoles The role combination the interface must be configured with.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.4.1.2
qosIfRedNumThresholdSets The values in this entry apply only to queues with the number of thresholds specified by this attribute.	ThresholdSetRange Type Values: 0 zeroT 1 oneT 2 twoT 4 fourT 8 eightT Description: An integer that is limited to the number of threshold sets per queue supported by the PIB. A threshold set is a collection of parameters describing queue threshold. The parameters of a threshold set depend on the drop …	.1.3.6.1.4.1.52642.18.2.1.8.4.1.3
qosIfRedThresholdSet The threshold set to which the lower and upper values apply. It must be in the range 1 through qosIfRedNumThresholdSets. There must be exactly one PRI for each value in this range.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.52642.18.2.1.8.4.1.4
qosIfRedThresholdSetLower The threshold value below which no packets are dropped.	Percent Type Constraints: range: 0..100 Description: An integer that is in the range of a percent value.	.1.3.6.1.4.1.52642.18.2.1.8.4.1.5
qosIfRedThresholdSetUpper The threshold value above which all packets are dropped.	Percent Type Constraints: range: 0..100 Description: An integer that is in the range of a percent value.	.1.3.6.1.4.1.52642.18.2.1.8.4.1.6

A class for threshold sets in a queue supporting tail drop.
If the size of the queue for a given threshold set is at or
below the specified value then packets assigned to that
threshold set are always accepted into the queue.  If the size
of the queue is above the specified value then packets are
always dropped.

qosIfTailDropEntry row .1.3.6.1.4.1.52642.18.2.1.8.5.1

An instance of this class specifies the queue depth for a
particular tail-drop threshold set on an interface with a
particular role combination.

Indexes

qosIfTailDropId

Column	Syntax	OID
qosIfTailDropId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.5.1.1
qosIfTailDropRoles The role combination the interface must be configured with.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.5.1.2
qosIfTailDropNumThresholdSets The value in this entry applies only to queues with the number of thresholds specified by this attribute.	ThresholdSetRange Type Values: 0 zeroT 1 oneT 2 twoT 4 fourT 8 eightT Description: An integer that is limited to the number of threshold sets per queue supported by the PIB. A threshold set is a collection of parameters describing queue threshold. The parameters of a threshold set depend on the drop …	.1.3.6.1.4.1.52642.18.2.1.8.5.1.3
qosIfTailDropThresholdSet The threshold set to which the threshold value applies	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.52642.18.2.1.8.5.1.4
qosIfTailDropThresholdSetValue The threshold value above which packets are dropped.	Percent Type Constraints: range: 0..100 Description: An integer that is in the range of a percent value.	.1.3.6.1.4.1.52642.18.2.1.8.5.1.5

A class of scheduling weights for each queue of an interface
that supports weighted round robin scheduling or a mix of
priority queueing and weighted round robin.  For a queue with
N priority queues, the N highest queue numbers are the
priority queues with the highest queue number having the
highest priority.  WRR is applied to the non-priority queues.

qosIfWeightsEntry row .1.3.6.1.4.1.52642.18.2.1.8.6.1

An instance of this class specifies the scheduling weight for
a particular queue of an interface with a particular number
of queues and with a particular role combination.

Indexes

qosIfWeightsId

Column	Syntax	OID
qosIfWeightsId An integer index to identify the instance of the policy class.	PolicyInstanceId Description: A textual convention for an attribute that is an an unsigned integer index attribute of class. It is used for attributes that exist for the purpose of providing an integer index of an instance. For any integ…	.1.3.6.1.4.1.52642.18.2.1.8.6.1.1
qosIfWeightsRoles The role combination the interface must be configured with.	RoleCombination Type Constraints: range: 0..255 Description: A Display string consisting of a set of roles concatenated with a '+' character where the roles are in lexicographic order from minimum to maximum.	.1.3.6.1.4.1.52642.18.2.1.8.6.1.2
qosIfWeightsNumQueues The value of the weight in this instance applies only to interfaces with the number of queues specified by this attribute.	QueueRange Type Values: 1 oneQ 2 twoQ 3 threeQ 4 fourQ 8 eightQ 16 sixteenQ 32 thirtyTwoQ 64 sixtyFourQ Description: An integer that is limited to the number of queues per interface supported by the PIB. Limited to 64 which is the number of codepoints.	.1.3.6.1.4.1.52642.18.2.1.8.6.1.3
qosIfWeightsQueue The queue to which the weight applies.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.52642.18.2.1.8.6.1.4
qosIfWeightsDrainSize The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the bandwith allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the non-pr…	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.8.6.1.5
qosIfWeightsQueueSize The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. …	SNMPv2-TCUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52642.18.2.1.8.6.1.6