FOUNDRY-SN-VSRP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
39
snVsrpIfTable
table.1.3.6.1.4.1.1991.1.1.3.21.2.1
·
1 row entry
·
3 columns
Uses the brocade variant from
Command help
/opt/observium/mibs/brocade.
Walk snVsrpIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-VSRP-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-VSRP-MIB::snVsrpIfTable'
The VSRP Interface Table describes the interfaces from the viewpoint of VSRP.
The VSRP Interface Entry describes one interface from
the viewpoint of VSRP.
the viewpoint of VSRP.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| snVsrpIfVlanIdVlan index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1991.1.1.3.21.2.1.1.1 |
| snVsrpIfAuthTypeThe authentication type of this interface. | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.2.1.1.2 |
| snVsrpIfAuthPasswordThe simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd. | OctetStringr/w | .1.3.6.1.4.1.1991.1.1.3.21.2.1.1.3 |
snVsrpVirRtrTable
table.1.3.6.1.4.1.1991.1.1.3.21.3.1
·
1 row entry
·
36 columns
Uses the brocade variant from
Command help
/opt/observium/mibs/brocade.
Walk snVsrpVirRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-SN-VSRP-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-SN-VSRP-MIB::snVsrpVirRtrTable'
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
The vsrp virtual router Entry describes one virtual router from
the viewpoint of vsrp.
the viewpoint of vsrp.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| snVsrpVirRtrVlanIdVlan index. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1 |
| snVsrpVirRtrIdOne of the virtual router ID of this vsrp interface. | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2 |
| snVsrpVirRtrOwnershipThe ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface. | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3 |
| snVsrpVirRtrCfgPriorityThe higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Route… | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4 |
| snVsrpVirRtrTrackPriorityThe higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first c… | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5 |
| snVsrpVirRtrCurrPriorityThe higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN. | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6 |
| snVsrpVirRtrHelloIntTime interval between advertisements (seconds). | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7 |
| snVsrpVirRtrDeadIntDead interval (seconds). | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8 |
| snVsrpVirRtrPreemptModeThis mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption. | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9 |
| snVsrpVirRtrStateThis object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10 |
| snVsrpVirRtrIpAddrMaskThe numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp. | OctetStringr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11 |
| snVsrpVirRtrActivateThis object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12 |
| snVsrpVirRtrTrackPortListThis object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below.… | OctetStringr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13 |
| snVsrpVirRtrAdvertiseBackupSet Advertise this backup router to master | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14 |
| snVsrpVirRtrHoldDownIntVSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15 |
| snVsrpVirRtrInitTtlVSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16 |
| snVsrpVirRtrIncPortListInclude all free ports of the VLAN into its control ports | OctetStringr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17 |
| snVsrpVirRtrSaveSet VSRP to save current parameters value | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18 |
| snVsrpVirRtrBackupIntTime interval between backup routers hello message advertisements (seconds). | Integer32r/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19 |
| snVsrpVirRtrRowStatusThis object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row … | Enumerationr/w | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20 |
| snVsrpVirRtrRxArpPktDropCntsThe received vsrp ARP Packet Drop Counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21 |
| snVsrpVirRtrRxIpPktDropCntsThe received VSRP IP Packet Drop Counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22 |
| snVsrpVirRtrRxPortMismatchCntsThe received vsrp Port mismatching Counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23 |
| snVsrpVirRtrRxNumOfIpMismatchCntsThe received VSRP Number of IP Addresses mismatching Counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24 |
| snVsrpVirRtrRxIpMismatchCntsThe received vsrp IP Address mismatching Counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25 |
| snVsrpVirRtrRxHelloIntMismatchCntsThe counts of the virtual router interface with hello interval mismatch counts. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26 |
| snVsrpVirRtrRxPriorityZeroFromMasterCntsThe counts of the virtual router interface with Priority zero from the master. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27 |
| snVsrpVirRtrRxHigherPriorityCntsThe counts of the virtual router interface with higher Priority. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28 |
| snVsrpVirRtrTransToMasterStateCntsThe counts of the virtual router interface transition to master state. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29 |
| snVsrpVirRtrTransToBackupStateCntsThe counts of the virtual router interface transition to backup state. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30 |
| snVsrpVirRtrCurrDeadIntCurrent Dead interval (in 100 milliseconds). | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31 |
| snVsrpVirRtrCurHelloIntSet backup router hello interval | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32 |
| snVsrpVirRtrCurHoldDownIntVSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33 |
| snVsrpVirRtrCurInitTtlVSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34 |
| snVsrpVirRtrHelloMacAddressHello MAC address. | MacAddress Type Constraints: range: 6 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35 |
| snVsrpVirRtrMasterIpAddrThe master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router. | SNMPv2-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36 |