This MIB module contains managed object definitions for pseudo-wire operation as in Bryant, S. and P. Pate, 'Pseudo Wire Emulation Edge-to-Edge (PWE3) Architecture' [RFC3985], Martini, L., et al, 'Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP)' [RFC4447], and Townsley, M., et al, 'Layer Two Tunneling Protocol (Version 3)' [RFC3931]. This MIB module enables the use of any underlying packet switched network (PSN). MIB nodules that will support PW operations over specific PSN types are defined in separate memos. The indexes for this MIB module are also used to index the PSN-specific tables and the PW-specific tables. The PW Type dictates which PW-specific MIB module to use. Copyright (C) The IETF Trust (2007). This version of this MIB module is part of RFC XXX; For full legal notices see the RFC itself or http://www.ietf.org/copyrights/ianamib.html -- RFC Ed.: replace XXX with actual RFC number & remove this note |
IANAPwCapabilities, IANAPwPsnTypeTC, IANAPwTypeTC | FOUNDRY-IANA-PWE3-MIB |
PwAttachmentIdentifierType, PwIndexType, PwIndexOrZeroType, PwGroupID, PwIDType, PwOperStatusTC, PwCwStatusTC, PwStatus, PwFragSize, PwFragStatus | FOUNDRY-PW-TC-STD-MIB |
snAgGblTrapMessage | FOUNDRY-SN-AGENT-MIB |
pwe3 | FOUNDRY-SN-ROOT-MIB |
HCPerfValidIntervals, HCPerfTimeElapsed, HCPerfIntervalCount, HCPerfCurrentCount | HC-PerfHist-TC-MIB |
InterfaceIndexOrZero | IF-MIB |
InetAddressType, InetAddress | INET-ADDRESS-MIB |
PerfCurrentCount, PerfIntervalCount | PerfHist-TC-MIB |
SnmpAdminString | SNMP-FRAMEWORK-MIB |
NOTIFICATION-GROUP, MODULE-COMPLIANCE, OBJECT-GROUP | SNMPv2-CONF |
NOTIFICATION-TYPE, TimeTicks, Counter64, Counter32, Unsigned32, Integer32, OBJECT-TYPE, MODULE-IDENTITY | SNMPv2-SMI |
StorageType, RowStatus, TruthValue, TimeStamp, TEXTUAL-CONVENTION | SNMPv2-TC |
Name | Base Type | Values/Constraints |
---|---|---|
vll(1), vllLocal(2), vpls(3) |
![]() | .1.3.6.1.4.1.1991.3.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.0 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.10 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.11 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.10 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.11 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.12 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.13 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.14 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.15 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.16 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.17 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.18 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.19 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.20 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.21 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.22 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.23 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.24 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.25 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.26 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.27 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.28 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.29 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.30 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.31 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.32 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.33 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.34 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.35 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.36 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.37 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.38 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.39 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.40 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.41 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.42 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.43 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.44 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.45 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.46 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.6 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.8 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.2.1.9 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.20 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.6 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.7 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.3.1.8 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.10 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.11 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.6 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.7 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.8 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.4.1.9 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.6 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.7 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.8 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.5.1.9 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.6 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.7.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1.3 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1.4 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.8.1.5 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.1.9 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.2 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.2.1 | |
![]() | .1.3.6.1.4.1.1991.3.1.2.2.2 |
Name | OID | Description |
---|---|---|
.1.3.6.1.4.1.1991.3.1.2.0.1 | This notification is generated when the pwOperStatus object for one or more contiguous entries in pwTable are about to enter the down(2) state from some other state. The included values of pwOperStatus MUST all be set equal to this down(2) state. The two instances of pwOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two pwOperStatus objects MUST be identical. The varbind fdryPwServiceType, specifies the service that originated this notification. The varbind snAgGblTrapMessage displays the corresponding SYSLOG content for this notification, which is more descriptive. | |
.1.3.6.1.4.1.1991.3.1.2.0.2 | This notification is generated when the pwOperStatus object for one or more contiguous entries in pwTable are about to enter the up(1) state from some other state. The included values of pwOperStatus MUST both be set equal to this new state (i.e: up(1)). The two instances of pwOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two pwOperStatus objects MUST be the identical. The varbind fdryPwServiceType, specifies the service that originated this notification. The varbind snAgGblTrapMessage displays the corresponding SYSLOG content for this notification, which is more descriptive. | |
.1.3.6.1.4.1.1991.3.1.2.0.3 | This notification is generated when the PW has been deleted, i.e. when the pwRowStatus has been set to destroy(6), the PW has been deleted by a non-MIB application or due to auto-discovery process. pwName varbind has been added as a proprietary extension to provide a name, in addition to the pwID, which has the VC ID. For VPLS PW, name is the VPLS instance name. For VLL PW, it is the VLL instance name. Similarly, for VLL-Local PW, it is the VLL-Local's instance name. The varbind fdryPwServiceType, specifies the service that originated this notification. |