FORTINET-FORTIAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
107

fapRadioTable

table
.1.3.6.1.4.1.12356.120.4.1 · 1 row entry · 30 columns
Open in standard view
Uses the fortinet variant from /opt/observium/mibs/fortinet.
Command help
Walk fapRadioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORTINET-FORTIAP-MIB' -M '/opt/observium/mibs/fortinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORTINET-FORTIAP-MIB::fapRadioTable' 
A configuration table of device's radios
fapRadioEntry row .1.3.6.1.4.1.12356.120.4.1.1
An entry containing information applicable
to a particular virtual domain
Indexes
Column Syntax OID
fapRadioIndex
Radio index number.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.12356.120.4.1.1.1
fapRadioMode
Configured radio mode.
Enumeration
Enumerated Values:
0ap
1disabled
2monitor
3sniffer
4failed
 .1.3.6.1.4.1.12356.120.4.1.1.2
fapRadioCountry
Radio Operating Country.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.3
fapRadioCountryId
Radio Operating Country ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.4
fapRadioStationInfo
Connected & Allowed Stations on the Radio.
Format x/y, x is the current station count and y is
the maximum number of stations allowed.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.5
fapRadioType
WiFi band Radio operates.
Enumeration
Enumerated Values:
0ieee80211a
1ieee80211b
2ieee80211gonly
3ieee80211ac2g
4ieee80211ac
5ieee80211n24G
6ieee80211n5G
7ieee80211n
8ieee80211ax24G
9ieee80211ax5G
10ieee80211ax
 .1.3.6.1.4.1.12356.120.4.1.1.6
fapRadioHT2040Coexist
Allowing both HT20 and HT40 on the same Radio.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.4.1.1.7
fapRadioBeaconInterval
Time between beacon frames in msec.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.8
fapRadioTxPowerConfig
Configured Tx Power of the Radio.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.9
fapRadioTxPowerOper
Operating Tx Power of the Radio.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.10
fapRadioTxPowerMax
Maximum Tx Power of the Radio.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.11
fapRadioChannelWidth
Channel bandwidth: 160, 80, 40, or 20MHz.
Enumeration
Enumerated Values:
0bw20Mhz
1bw40Mhz
2bw80Mhz
3bw160Mhz
 .1.3.6.1.4.1.12356.120.4.1.1.12
fapRadioSGI
Short guard interval configuration.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.4.1.1.13
fapRadioChannelOper
Operating radio channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.14
fapRadioChannelUtil
Channel utilization measurement.
Enumeration
Enumerated Values:
0disable
1enable
2enabled2
 .1.3.6.1.4.1.12356.120.4.1.1.15
fapRadioSensorMode
Scan WiFi nearby stations.
Enumeration
Enumerated Values:
0disable
1both
2foreignOnly
3invalid
 .1.3.6.1.4.1.12356.120.4.1.1.16
fapRadioApScan
Rogue AP Detection.
Enumeration
Enumerated Values:
0disable
1background
2foreground
3background2
4foreground2
 .1.3.6.1.4.1.12356.120.4.1.1.17
fapRadioApScanPeriod
Period of time between background scans.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.18
fapRadioApScanInterval
Period of time between scanning two channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.19
fapRadioApScanDuration
Listening time on a scanning channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.20
fapRadioApScanIdleTime
Waiting time for channel inactivity before scanning a new channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.21
fapRadioApScanReportTimer
Period of time between background scan reports.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.4.1.1.22
fapRadioDARRP
Distributed Automatic Radio Resource Provisioning.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.4.1.1.23
fapRadioSpectralAnalysis
Spectrum analysis to find interference.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.4.1.1.24
fapRadioWIDS
Wireless Intrusion Detection System Profile.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.25
fapRadioFortiPresence
FortiPresence to monitor the location and activity of WiFi clients.
Enumeration
Enumerated Values:
0disable
1foreign
2both
 .1.3.6.1.4.1.12356.120.4.1.1.26
fapRadioAirFairness
Disable/enable air time fairness.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.4.1.1.27
fapRadioConfigChannelList
Configured channel list.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.28
fapRadioHwChannelList
Hareware supported channel list.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.29
fapRadioNolChannelList
Non-occupancy channel list.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.4.1.1.30

fapVapTable

table
.1.3.6.1.4.1.12356.120.7.1 · 1 row entry · 56 columns
Open in standard view
Uses the fortinet variant from /opt/observium/mibs/fortinet.
Command help
Walk fapVapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORTINET-FORTIAP-MIB' -M '/opt/observium/mibs/fortinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORTINET-FORTIAP-MIB::fapVapTable' 
A table of virtual access point configured on the device
fapVapEntry row .1.3.6.1.4.1.12356.120.7.1.1
An entry containing information applicable \
to a particular virtual domain
Indexes
Column Syntax OID
fapVapRadioId
Index number of the radio.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.12356.120.7.1.1.1
fapVapWlanId
Index number of the WLAN.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.12356.120.7.1.1.2
fapVapBSSID
BSSID of the virtual AP.
OctetString
Constraints:
range: 6-6
range: 8-8
 .1.3.6.1.4.1.12356.120.7.1.1.3
fapVapSSID
SSID used by the virtual AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.4
fapVapAdmin
Administration Status of VAP interface.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.12356.120.7.1.1.5
fapVapStatus
Operating Status of VAP interface.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.12356.120.7.1.1.6
fapVapMeshBackhaul
Enable/Disable mesh backhaul on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.7
fapVapLocalAuth
Enable/disable local authorization on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.8
fapVapLocalStandAlone
Enable/disable local Stand Alone on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.9
fapVapNatMode
Enable/Disable NAT mode on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.10
fapVapLocalBridging
Enable/Disable local briding on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.11
fapVapSplitTunnel
Enable/Disable split tunnel on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.12
fapVapLanIsolation
Enable/Disable LAN isolation on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.13
fapVapIntraSsidPriv
Enable/Disable intra SSID privacy on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.14
fapVapMacAuth
Enable/Disable MAC authorization on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.15
fapVapMacAuthFailThrough
Enable/Disable MAC authorization fail through on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.16
fapVapTunnelType
The tunnel type of the VAP.
Enumeration
Enumerated Values:
0local
1ieee8023
2ieee80211
3invalid
 .1.3.6.1.4.1.12356.120.7.1.1.17
fapVapVlanId
Vlan ID of the VAP.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.12356.120.7.1.1.18
fapVapAuth
Authentication information of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.19
fapVapProbRespSuppress
Enable/Disable probe response suppress on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.20
fapVapProbRespThresh
Probe response threshold on the VAP in dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.21
fapVapRxSop
Enable/Disable Rx SoP on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.22
fapVapRx5GThresh
Rx 5G threshold on the VAP in dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.23
fapVapRx2GThresh
Rx 2G threshold on the VAP in dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.24
fapVapLdpcType
LDPC coding type of the VAP.
Enumeration
Enumerated Values:
0none
1ldpcRx
2ldpcTx
3ldpcRxTx
 .1.3.6.1.4.1.12356.120.7.1.1.25
fapVapDhcpOp82Insert
Enable/Disable DHCP option 82 insertion on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.26
fapVapDhcpOp82CircId
DHCP option 82 circuit ID of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.27
fapVapDhcpOp82RemId
DHCP option 82 remote ID of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.28
fapVapBcSuppression
Broadcast and multicast suppression of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.29
fapVapKeyId
Key Id of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.30
fapVapKeyLength
Key length of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.31
fapVapPMF
PMF options of the VAP.
Enumeration
Enumerated Values:
0disable
1optional
2required
 .1.3.6.1.4.1.12356.120.7.1.1.32
fapVapOKC
Disable/enable the OKC of the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.33
fapVapDynamicVLAN
Enable/Disable dynamic VLAN on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.34
fapVapExternRoaming
Enable/disable Extern roaming on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.35
fapVapVoiceEnterprise
Enable/Disable voice enterprise on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.36
fapVapFastBssTrans
Enable/Disable fast BSS transtion on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.37
fapVapCpAuth
Enable/Disable captive portal authorization on the VAP.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.38
fapVapWebAuthServer
CP authorization web server of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.39
fapVapAtfWeight
Air time fairness weightage of the VAP in percentage.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.40
fapVapRadServer
Radius server list. Format(IP address:port number).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.41
fapVapRadAcctServer
Radius account server list. Format(IP address:port number).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.42
fapVapRadAcctInterimIntv
Radius account interim interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.43
fapVapRadCoA
Enable/disable Radius CoA.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.44
fapVapStaInfoCount
Station count of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.45
fapVapStaInfoMax
Station maximum count of the VAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.46
fapVapRateLimitUL
Rate limit(Kbps) up link.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.47
fapVapRateLimitDL
Rate limit(Kbps) down link.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.48
fapVapRateLimitUlUser
Rate limit(Kbps) up link user.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.49
fapVapRateLimitDLUser
Rate limit(Kbps) down link user.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.50
fapVapRateLimitBurst
Enable/disable rate limit burst.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.12356.120.7.1.1.51
fapVapPrimaryWag
The name of the primary WAG of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.52
fapVapSecondaryWag
The name of the secondary WAG of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.53
fapVapCurrentWag
The name of the current live WAG of the VAP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.7.1.1.54
fapVapTunEchoIntv
The time interval (seconds) to send out echo frame when the VAP is in the
tunnel dual ping mode.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.55
fapVapTunFallbackTimeout
Timeout value (seconds) to check if the current tunnel falls back to
the configured primary tunnel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.7.1.1.56

fapStationTable

table
.1.3.6.1.4.1.12356.120.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the fortinet variant from /opt/observium/mibs/fortinet.
Command help
Walk fapStationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORTINET-FORTIAP-MIB' -M '/opt/observium/mibs/fortinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORTINET-FORTIAP-MIB::fapStationTable' 
A table of connected stations on the device
fapStationEntry row .1.3.6.1.4.1.12356.120.8.1.1
An entry containing information applicable \
to connected stations
Indexes
Column Syntax OID
fapStaRadioId
Index number of the radio.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.12356.120.8.1.1.1
fapStaWlanId
Index number of the WLAN.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.12356.120.8.1.1.2
fapStaMacAddr
MAC address of the connected station.
OctetString
Constraints:
range: 6-6
range: 8-8
 .1.3.6.1.4.1.12356.120.8.1.1.3
fapStaBSSID
BSSID of the connected station.
OctetString
Constraints:
range: 6-6
range: 8-8
 .1.3.6.1.4.1.12356.120.8.1.1.4
fapStaVlanId
Vlan Id of the connected station.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.12356.120.8.1.1.5
fapStaIpAddr
IP address of the connected station.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12356.120.8.1.1.6
fapStaSSID
SSID of the connected station.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.12356.120.8.1.1.7

fapWagTable

table
.1.3.6.1.4.1.12356.120.9.1 · 1 row entry · 14 columns
Open in standard view
Uses the fortinet variant from /opt/observium/mibs/fortinet.
Command help
Walk fapWagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORTINET-FORTIAP-MIB' -M '/opt/observium/mibs/fortinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORTINET-FORTIAP-MIB::fapWagTable' 
A table of tunnel profiles configured on the device
fapWagEntry row .1.3.6.1.4.1.12356.120.9.1.1
An tunnel profile entry containing information applicable
to a particular virtual domain
Indexes
Column Syntax OID
fapWagTunType
The tunnel type of the WAG. It's one of indexes for the WAG entry.
Enumeration
Enumerated Values:
1l2tp
2gre
 .1.3.6.1.4.1.12356.120.9.1.1.1
fapWagIpAddr
The IP address of the WAG. It's one of indexes for the WAG entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12356.120.9.1.1.2
fapWagPort
The UDP port of the WAG. It's one of indexes for the WAG entry.
Integer32
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.12356.120.9.1.1.3
fapWagState
The FSM state of the current WAG.
Enumeration
Enumerated Values:
0init
1activemon
2alive
3dead
 .1.3.6.1.4.1.12356.120.9.1.1.4
fapWagRxPackets
The number of packets received on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.5
fapWagRxBytes
The number of bytes received on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.6
fapWagRxErrors
The number of received packet errors on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.7
fapWagTxPackets
The number of packets transmitted on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.8
fapWagTxBytes
The number of bytes transmitted on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.9
fapWagTxErrors
The number of transmitted packet errors on the current tunnel.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.12356.120.9.1.1.10
fapWagAliveTime
How long the tunnel is in active mode in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.9.1.1.11
fapWagPingInterv
Interval of the ping echo request in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.9.1.1.12
fapWagPingNum
The number of the ping echo requests.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.12356.120.9.1.1.13
fapWagDhcpAddr
The IP address used in the DHCP request.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.12356.120.9.1.1.14