stpTopologyChanged | .1.3.6.1.4.1.42019.3.2.0.1 | STP Topology changed events occur |
webInterfaceLoginOk | .1.3.6.1.4.1.42019.3.2.0.10 | Successfully authentification on web-interface |
webInterfaceLoginFail | .1.3.6.1.4.1.42019.3.2.0.11 | Fail authentification on web-interface |
emptyArpTable | .1.3.6.1.4.1.42019.3.2.0.12 | Arp table is empty |
upsLowVoltage | .1.3.6.1.4.1.42019.3.2.0.13 | UPS: Voltage on battery is low (below than 44V) |
upsBattrtyPower | .1.3.6.1.4.1.42019.3.2.0.14 | UPS: Power souce is battery |
upsVacPower | .1.3.6.1.4.1.42019.3.2.0.15 | UPS: Power souce is external VAC |
tamperIsActive | .1.3.6.1.4.1.42019.3.2.0.16 | Sensor 0 (Tamper) is active. |
sensor1isActive | .1.3.6.1.4.1.42019.3.2.0.17 | Sensor 1 (dry contact) is active |
sensor2isActive | .1.3.6.1.4.1.42019.3.2.0.18 | Sensor 2 (dry contact) is active |
input1isActive | .1.3.6.1.4.1.42019.3.2.0.19 | Input 1 is active |
specialFunctionNoLink | .1.3.6.1.4.1.42019.3.2.0.2 | This Notification indicates no link activity at activated
SpecialFunctions by criterion a link |
input2isActive | .1.3.6.1.4.1.42019.3.2.0.20 | Input 2 is active |
input3isActive | .1.3.6.1.4.1.42019.3.2.0.21 | Input 3 is active |
input4isActive | .1.3.6.1.4.1.42019.3.2.0.22 | Input 4 is active |
macFilteringAlarm | .1.3.6.1.4.1.42019.3.2.0.23 | Unallowed MAC address: |
portErrorDisabled | .1.3.6.1.4.1.42019.3.2.0.24 | Port Error-Disabled |
pwr180DiagnosticError | .1.3.6.1.4.1.42019.3.2.0.25 | The error of the PWR-180 power supply was diagnosed, check the power supply |
temperatureSensorLow | .1.3.6.1.4.1.42019.3.2.0.26 | Temperature: low level |
temperatureSensorHigh | .1.3.6.1.4.1.42019.3.2.0.27 | Temperature: high level |
humiditySensorLow | .1.3.6.1.4.1.42019.3.2.0.28 | Humidity: low level |
humiditySensorHigh | .1.3.6.1.4.1.42019.3.2.0.29 | Humidity: high level |
specialFunctionNoPingResponse | .1.3.6.1.4.1.42019.3.2.0.3 | This Notification indicates no ping response at activated
SpecialFunctions by criterion a ping |
leakageSensorAlarm | .1.3.6.1.4.1.42019.3.2.0.30 | Leakage sensor is active: 1 - Normal, 2 - Alarm |
specialFunctionLowSpeed | .1.3.6.1.4.1.42019.3.2.0.4 | This Notification indicates low speed on port at activated
SpecialFunctions by criterion a speed |
updateFirmware | .1.3.6.1.4.1.42019.3.2.0.5 | This Notification indicates a firmwre updating |
setToDefault | .1.3.6.1.4.1.42019.3.2.0.6 | Settings to default |
backupSettings | .1.3.6.1.4.1.42019.3.2.0.7 | Make backup copy of settings in file |
systemWarmStart | .1.3.6.1.4.1.42019.3.2.0.8 | Start system after reboot |
systemColdStart | .1.3.6.1.4.1.42019.3.2.0.9 | Start system after power down (Cold start) |
updateFirmwareTLP | .1.3.6.1.4.1.42019.4.2.0.1 | This Notification indicates a firmwre updating |
input2isChanged | .1.3.6.1.4.1.42019.4.2.0.10 | Input 2 is changed |
input3isChanged | .1.3.6.1.4.1.42019.4.2.0.11 | Input 3 is changed |
input4isChanged | .1.3.6.1.4.1.42019.4.2.0.12 | Input 4 is changed |
input5isChanged | .1.3.6.1.4.1.42019.4.2.0.13 | Input 5 is changed |
input6isChanged | .1.3.6.1.4.1.42019.4.2.0.14 | Input 6 is changed |
input7isChanged | .1.3.6.1.4.1.42019.4.2.0.15 | Input 7 is changed |
input8isChanged | .1.3.6.1.4.1.42019.4.2.0.16 | Input 8 is changed |
input9isChanged | .1.3.6.1.4.1.42019.4.2.0.17 | Input 9 is changed |
output1isChanged | .1.3.6.1.4.1.42019.4.2.0.18 | Output 1 is changed |
output2isChanged | .1.3.6.1.4.1.42019.4.2.0.19 | Output 2 is changed |
setToDefaultTLP | .1.3.6.1.4.1.42019.4.2.0.2 | Settings to default |
output3isChanged | .1.3.6.1.4.1.42019.4.2.0.20 | Output 3 is changed |
output4isChanged | .1.3.6.1.4.1.42019.4.2.0.21 | Output 4 is changed |
output5isChanged | .1.3.6.1.4.1.42019.4.2.0.22 | Output 5 is changed |
output6isChanged | .1.3.6.1.4.1.42019.4.2.0.23 | Output 6 is changed |
output7isChanged | .1.3.6.1.4.1.42019.4.2.0.24 | Output 7 is changed |
output8isChanged | .1.3.6.1.4.1.42019.4.2.0.25 | Output 8 is changed |
output9isChanged | .1.3.6.1.4.1.42019.4.2.0.26 | Output 9 is changed |
device1connFail | .1.3.6.1.4.1.42019.4.2.0.27 | Device 1 connection fail |
device2connFail | .1.3.6.1.4.1.42019.4.2.0.28 | Device 2 connection fail |
device3connFail | .1.3.6.1.4.1.42019.4.2.0.29 | Device 3 connection fail |
backupSettingsTLP | .1.3.6.1.4.1.42019.4.2.0.3 | Make backup copy of settings in file |
device4connFail | .1.3.6.1.4.1.42019.4.2.0.30 | Device 4 connection fail |
device5connFail | .1.3.6.1.4.1.42019.4.2.0.31 | Device 5 connection fail |
device6connFail | .1.3.6.1.4.1.42019.4.2.0.32 | Device 6 connection fail |
device7connFail | .1.3.6.1.4.1.42019.4.2.0.33 | Device 7 connection fail |
device8connFail | .1.3.6.1.4.1.42019.4.2.0.34 | Device 8 connection fail |
device9connFail | .1.3.6.1.4.1.42019.4.2.0.35 | Device 9 connection fail |
device10connFail | .1.3.6.1.4.1.42019.4.2.0.36 | Device 10 connection fail |
device11connFail | .1.3.6.1.4.1.42019.4.2.0.37 | Device 11 connection fail |
device12connFail | .1.3.6.1.4.1.42019.4.2.0.38 | Device 12 connection fail |
device13connFail | .1.3.6.1.4.1.42019.4.2.0.39 | Device 13 connection fail |
systemWarmStartTLP | .1.3.6.1.4.1.42019.4.2.0.4 | Start system after reboot |
device14connFail | .1.3.6.1.4.1.42019.4.2.0.40 | Device 14 connection fail |
device15connFail | .1.3.6.1.4.1.42019.4.2.0.41 | Device 15 connection fail |
device16connFail | .1.3.6.1.4.1.42019.4.2.0.42 | Device 16 connection fail |
device17connFail | .1.3.6.1.4.1.42019.4.2.0.43 | Device 17 connection fail |
device18connFail | .1.3.6.1.4.1.42019.4.2.0.44 | Device 18 connection fail |
device19connFail | .1.3.6.1.4.1.42019.4.2.0.45 | Device 19 connection fail |
device20connFail | .1.3.6.1.4.1.42019.4.2.0.46 | Device 20 connection fail |
device21connFail | .1.3.6.1.4.1.42019.4.2.0.47 | Device 21 connection fail |
device22connFail | .1.3.6.1.4.1.42019.4.2.0.48 | Device 22 connection fail |
device23connFail | .1.3.6.1.4.1.42019.4.2.0.49 | Device 23 connection fail |
systemColdStartTLP | .1.3.6.1.4.1.42019.4.2.0.5 | Start system after power down (Cold start) |
device24connFail | .1.3.6.1.4.1.42019.4.2.0.50 | Device 24 connection fail |
device25connFail | .1.3.6.1.4.1.42019.4.2.0.51 | Device 25 connection fail |
device26connFail | .1.3.6.1.4.1.42019.4.2.0.52 | Device 26 connection fail |
device27connFail | .1.3.6.1.4.1.42019.4.2.0.53 | Device 27 connection fail |
device28connFail | .1.3.6.1.4.1.42019.4.2.0.54 | Device 28 connection fail |
device29connFail | .1.3.6.1.4.1.42019.4.2.0.55 | Device 29 connection fail |
device30connFail | .1.3.6.1.4.1.42019.4.2.0.56 | Device 30 connection fail |
device31connFail | .1.3.6.1.4.1.42019.4.2.0.57 | Device 31 connection fail |
device32connFail | .1.3.6.1.4.1.42019.4.2.0.58 | Device 32 connection fail |
webInterfaceLoginOkTLP | .1.3.6.1.4.1.42019.4.2.0.6 | Successfully authentification on web-interface |
webInterfaceLoginFailTLP | .1.3.6.1.4.1.42019.4.2.0.7 | Fail authentification on web-interface |
emptyArpTableTLP | .1.3.6.1.4.1.42019.4.2.0.8 | Arp table is empty |
input1isChanged | .1.3.6.1.4.1.42019.4.2.0.9 | Input 1 is changed |