FORCEPOINT-NGFW-ENGINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
91

fwIfStatsTable

table
.1.3.6.1.4.1.47565.1.1.1.10 · 1 row entry · 15 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwIfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwIfStatsTable' 
This table contains an entry for each
interface in system
fwIfStatsEntry row .1.3.6.1.4.1.47565.1.1.1.10.1
Row for an interface
Indexes
No indexes recorded
Column Syntax OID
fwIfStatsIndex
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system.
Integer32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.47565.1.1.1.10.1.1
fwIfName
Name of interface
SNMPv2-TCDisplayString
Constraints:
range: 0-9
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.10.1.2
fwIfAcceptedPkts
Number of accepted packets by firewall rules
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.3
fwIfDroppedPkts
Number of dropped packets by firewall rules
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.4
fwIfLoggedPkts
Number of logged packets by firewall rules
SNMPv2-SMICounter64
Constraints:
range: -2147483648--2147483648
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.10.1.5
fwIfAccountedPkts
Number of accounted packets by firewall rules
SNMPv2-SMICounter64
Constraints:
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.10.1.6
fwIfRejectedPkts
Number of rejected packets by firewall rules
SNMPv2-SMICounter64
Constraints:
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.10.1.7
fwIfAcceptedBytes
Number of accepted bytes by firewall rules
SNMPv2-SMICounter64
Enumerated Values:
1unknown
2available
3emergency
4lowPower
5noService
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.8
fwIfDroppedBytes
Number of dropped bytes by firewall rules
SNMPv2-SMICounter64
Enumerated Values:
1unknown
2roaming
3home
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.9
fwIfLoggedBytes
Number of logged bytes by firewall rules
SNMPv2-SMICounter64
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.47565.1.1.1.10.1.10
fwIfAccountedBytes
Number of accounted bytes by firewall rules
SNMPv2-SMICounter64
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.47565.1.1.1.10.1.11
fwIfRejectedBytes
Number of rejected bytes by firewall rules
SNMPv2-SMICounter64
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.47565.1.1.1.10.1.12
fwIfForwardedPkts
Number of forwarded packets by firewall rules
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.13
fwIfForwardedBytes
Number of forwarded bytes by firewall rules
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.10.1.14
fwIfComment
Comment of interface
SNMPv2-TCDisplayString
Constraints:
range: -150-0
range: -2147483648--2147483648
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.10.1.15

fwCpuStatsTable

table
.1.3.6.1.4.1.47565.1.1.1.11.1 · 1 row entry · 10 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwCpuStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwCpuStatsTable' 
This table contains an entry for each CPU in
a system and total usage of all cpus.
fwCpuStatsEntry row .1.3.6.1.4.1.47565.1.1.1.11.1.1
Row with information about CPU usage
Indexes
No indexes recorded
Column Syntax OID
fwCpuStatsId
A unique value, greater than zero, for each
CPU in the managed system. First element with Id '0'
is designed for total values.
Integer32
Enumerated Values:
1unknown
2available
3emergency
4lowPower
5noService
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.1
fwCpuName
Name of data current line concern
SNMPv2-TCDisplayString
Enumerated Values:
1unknown
2roaming
3home
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.2
fwCpuTotal
The total CPU load percentage
percentSNMPv2-SMIUnsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.3
fwCpuUser
The percentage of time the CPU has spent running
users' processes that are not niced
percentSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.4
fwCpuSystem
The percentage of time the CPU has spent running
the kernel and its processes
percentSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.5
fwCpuNice
The percentage of time the CPU has spent running
users' processes that have been niced
percentSNMPv2-SMIUnsigned32
Constraints:
range: -2147483648--2147483648
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.6
fwCpuIdle
The percentage of time the CPU was idle
percentSNMPv2-SMIUnsigned32
Constraints:
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.7
fwCpuIoWait
The percentage of time the CPU has been waiting
for I/O to complete
percentSNMPv2-SMIUnsigned32
Constraints:
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.8
fwCpuHwIrq
The percentage of time the CPU has been servicing
hardware interrupts
percentSNMPv2-SMIUnsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.9
fwCpuSoftIrq
The percentage of time the CPU has been servicing
software interrupts
percentSNMPv2-SMIUnsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.47565.1.1.1.11.1.1.10

fwDiskStatsTable

table
.1.3.6.1.4.1.47565.1.1.1.11.3 · 1 row entry · 6 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwDiskStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwDiskStatsTable' 
Table contains an entry for each partition
mounted in a system.
fwDiskStatsEntry row .1.3.6.1.4.1.47565.1.1.1.11.3.1
Row of information concerning one partition
Indexes
No indexes recorded
Column Syntax OID
fwPartitionIndex
A unique value, greater than zero, for each partition
Integer32
Enumerated Values:
1unknown
2automatic
3manual
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.1
fwPartitionDevName
A unique name of a device
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.2
fwMountPointName
Name of a mount point
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.3
fwPartitionSize
Total size of the partition
kbytesHCNUM-TCCounterBasedGauge64
Constraints:
range: 0-255
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.4
fwPartitionUsed
Amount of used space of the partition
(in kilobytes)
kbytesHCNUM-TCCounterBasedGauge64
Enumerated Values:
1unknown
2ok
3notInsert
4networkReject
5blocked
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.5
fwPartitionAvail
Information about amount of free space on
partition (in kilobytes)
kbytesHCNUM-TCCounterBasedGauge64
Enumerated Values:
1unknown
2available
3emergency
4lowPower
5noService
 .1.3.6.1.4.1.47565.1.1.1.11.3.1.6

fwVpnEp4Table

table
.1.3.6.1.4.1.47565.1.1.1.12 · 1 row entry · 7 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwVpnEp4Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwVpnEp4Table' 
This table contains an entry for each
IPv4 VPN end-point pair
fwVpnEp4Entry row .1.3.6.1.4.1.47565.1.1.1.12.1
Row for an IPv4 VPN end-point pair
Indexes
No indexes recorded
Column Syntax OID
fwVpnEp4Index
A unique value, greater than zero, for each
end-point pair.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.47565.1.1.1.12.1.1
fwVpnEp4Local
Local IPv4 end-point address
INET-ADDRESS-MIBInetAddressIPv4
Type Constraints:
range: 4
 .1.3.6.1.4.1.47565.1.1.1.12.1.2
fwVpnEp4Remote
Remote IPv4 end-point address
INET-ADDRESS-MIBInetAddressIPv4
Type Constraints:
range: 4
 .1.3.6.1.4.1.47565.1.1.1.12.1.3
fwVpnEp4RemoteType
The type of remote VPN end-point
VpnEndpointType
Type Values:
0unknown
1static
2dynamic
3mobile
 .1.3.6.1.4.1.47565.1.1.1.12.1.4
fwVpnEp4ReceivedBytes
Number of received bytes between the end-point pair
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.12.1.5
fwVpnEp4SentBytes
Number of sent bytes between the end-point pair
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.12.1.6
fwVpnEp4IpsecSa
Number of currently established IPsec SAs
between the end-point pair
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.47565.1.1.1.12.1.7

fwVpnEp6Table

table
.1.3.6.1.4.1.47565.1.1.1.13 · 1 row entry · 7 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwVpnEp6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwVpnEp6Table' 
This table contains an entry for each
IPv6 VPN end-point pair
fwVpnEp6Entry row .1.3.6.1.4.1.47565.1.1.1.13.1
Row for an IPv6 VPN end-point pair
Indexes
No indexes recorded
Column Syntax OID
fwVpnEp6Index
A unique value, greater than zero, for each
end-point pair.
Integer32
Constraints:
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.13.1.1
fwVpnEp6Local
Local IPv6 end-point address
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.47565.1.1.1.13.1.2
fwVpnEp6Remote
Remote IPv6 end-point address
INET-ADDRESS-MIBInetAddressIPv6
Constraints:
range: 0-32
 .1.3.6.1.4.1.47565.1.1.1.13.1.3
fwVpnEp6RemoteType
The type of remote VPN end-point
VpnEndpointType
Constraints:
range: 0-64
Type Values:
0unknown
1static
2dynamic
3mobile
 .1.3.6.1.4.1.47565.1.1.1.13.1.4
fwVpnEp6ReceivedBytes
Number of received bytes between the end-point pair
SNMPv2-SMICounter64
Enumerated Values:
1unknown
2air
3cable
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.13.1.5
fwVpnEp6SentBytes
Number of sent bytes between the end-point pair
SNMPv2-SMICounter64
Enumerated Values:
1unknown
2oneXRtt
3evDo
4gsm
5lte
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.13.1.6
fwVpnEp6IpsecSa
Number of currently established IPsec SAs
between the end-point pair
SNMPv2-SMICounter32
Constraints:
range: -2147483648--2147483648
range: -150-0
 .1.3.6.1.4.1.47565.1.1.1.13.1.7

fwMbrInterfaceTable

table
.1.3.6.1.4.1.47565.1.1.1.14 · 1 row entry · 5 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwMbrInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwMbrInterfaceTable' 
This table contains an entry for each cellular
interface in system
fwMbrInterfaceEntry row .1.3.6.1.4.1.47565.1.1.1.14.1
Row for a cellular interface
Indexes
No indexes recorded
Column Syntax OID
fwMbrInterfaceIndex
A unique value, greater than zero, for each cellular
interface or interface sub-layer in the managed system.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.47565.1.1.1.14.1.1
fwMbrName
Modem name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.14.1.2
fwMbrBandUsed
Interface band in use
SNMPv2-TCDisplayString
Constraints:
range: 0-512
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.14.1.3
fwMbrSignalStrength
Modem signal strength in dBm
dBmSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.47565.1.1.1.14.1.4
fwMbrStatus
Status of the modem
(not present, ok, warning, error, fatal error)
FwHwComponentStatus
Type Values:
-1notPresent
0ok
1warning
2error
3fatalError
 .1.3.6.1.4.1.47565.1.1.1.14.1.5

fwHwTempSensorTable

table
.1.3.6.1.4.1.47565.1.1.1.16 · 1 row entry · 4 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwHwTempSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwHwTempSensorTable' 
This table contains an entry for each
temperature sensor in system
fwHwTempSensorEntry row .1.3.6.1.4.1.47565.1.1.1.16.1
Row for a temperature sensor
Indexes
No indexes recorded
Column Syntax OID
fwHwTempSensorIndex
A unique value, greater than zero, for each
temperature sensor
Integer32 .1.3.6.1.4.1.47565.1.1.1.16.1.1
fwHwTemperatureName
Name of the temperature sensor
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.16.1.2
fwHwTemperature
Temperature in degrees C
for the given temperature sensor
degrees CSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.47565.1.1.1.16.1.3
fwHwTemperatureStatus
Status of the temperature sensor
(not present, ok, warning, error, fatal error)
FwHwComponentStatus
Type Values:
-1notPresent
0ok
1warning
2error
3fatalError
 .1.3.6.1.4.1.47565.1.1.1.16.1.4

fwPsuTable

table
.1.3.6.1.4.1.47565.1.1.1.17 · 1 row entry · 3 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwPsuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwPsuTable' 
This table contains an entry for each
power supply unit in system
fwPsuEntry row .1.3.6.1.4.1.47565.1.1.1.17.1
Row for a PSU
Indexes
No indexes recorded
Column Syntax OID
fwPsuIndex
A unique value, greater than zero, for each PSU
Integer32 .1.3.6.1.4.1.47565.1.1.1.17.1.1
fwPsuName
Name of the PSU
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.17.1.2
fwPsuStatus
Status of the PSU
(not present, ok, warning, error, fatal error)
FwHwComponentStatus
Type Values:
-1notPresent
0ok
1warning
2error
3fatalError
 .1.3.6.1.4.1.47565.1.1.1.17.1.3

fwFanTable

table
.1.3.6.1.4.1.47565.1.1.1.18 · 1 row entry · 4 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwFanTable' 
This table contains an entry for each
fan in system
fwFanEntry row .1.3.6.1.4.1.47565.1.1.1.18.1
Row for a fan
Indexes
No indexes recorded
Column Syntax OID
fwFanIndex
A unique value, greater than zero, for each fan
Integer32 .1.3.6.1.4.1.47565.1.1.1.18.1.1
fwFanName
Fan name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.18.1.2
fwFan
Fan speed in RPM
RPMSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.47565.1.1.1.18.1.3
fwFanStatus
Status of the fan
(not present, ok, warning, error, fatal error)
FwHwComponentStatus
Type Values:
-1notPresent
0ok
1warning
2error
3fatalError
 .1.3.6.1.4.1.47565.1.1.1.18.1.4

nodeTestTable

table
.1.3.6.1.4.1.47565.1.1.1.19.7 · 1 row entry · 4 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk nodeTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::nodeTestTable' 
This table contains an entry for each
test instance that was
configured to send a trap on test failure
nodeTestEntry row .1.3.6.1.4.1.47565.1.1.1.19.7.1
Row for a test instance
Indexes
No indexes recorded
Column Syntax OID
nodeTestIndex
Unique positive integer index
of the nodeTest instance
Unsigned32 .1.3.6.1.4.1.47565.1.1.1.19.7.1.1
nodeTestIdentity
Identification string of a nodeTest
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.19.7.1.2
nodeTestResult
The most recent result of the
nodeTest
Enumeration .1.3.6.1.4.1.47565.1.1.1.19.7.1.3
nodeTestResultTime
The timestamp of the most recent
result of the nodeTest
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.47565.1.1.1.19.7.1.4

fwVoltageTable

table
.1.3.6.1.4.1.47565.1.1.1.20 · 1 row entry · 4 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwVoltageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwVoltageTable' 
This table contains an entry for each
voltage in system
fwVoltageEntry row .1.3.6.1.4.1.47565.1.1.1.20.1
Row for a voltage
Indexes
No indexes recorded
Column Syntax OID
fwVoltageIndex
A unique value, greater than zero, for each voltage
Integer32 .1.3.6.1.4.1.47565.1.1.1.20.1.1
fwVoltageName
Voltage name
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.20.1.2
fwVoltage
Voltage in volts
VFwFixedThousandths .1.3.6.1.4.1.47565.1.1.1.20.1.3
fwVoltageStatus
Status of the voltage
(not present, ok, warning, error, fatal error)
FwHwComponentStatus
Type Values:
-1notPresent
0ok
1warning
2error
3fatalError
 .1.3.6.1.4.1.47565.1.1.1.20.1.4

fwVETable

table
.1.3.6.1.4.1.47565.1.1.1.21 · 1 row entry · 4 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwVETable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwVETable' 
This table contains an entry for each
virtual engine
fwVEEntry row .1.3.6.1.4.1.47565.1.1.1.21.1
Row for virtual engine
Indexes
No indexes recorded
Column Syntax OID
fwVEIndex
A unique value, greater that zero, for each
virtual engine.
Integer32 .1.3.6.1.4.1.47565.1.1.1.21.1.1
fwVEEngineId
Engine ID of the virtual engine
Integer32 .1.3.6.1.4.1.47565.1.1.1.21.1.2
fwVEName
Name of the virtual engine
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.21.1.3
fwVEStatus
Status of the virtual engine e.g. Active
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.21.1.4

fwIfStatsProcTable

table
.1.3.6.1.4.1.47565.1.1.1.22 · 1 row entry · 18 columns
Open in standard view
Uses the forcepoint variant from /opt/observium/mibs/forcepoint.
Command help
Walk fwIfStatsProcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FORCEPOINT-NGFW-ENGINE-MIB' -M '/opt/observium/mibs/forcepoint:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FORCEPOINT-NGFW-ENGINE-MIB::fwIfStatsProcTable' 
This table contains an entry for each
interface in system
fwIfStatsProcEntry row .1.3.6.1.4.1.47565.1.1.1.22.1
Row for an interface
Indexes
No indexes recorded
Column Syntax OID
fwIfStatsProcIndex
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system.
Integer32 .1.3.6.1.4.1.47565.1.1.1.22.1.1
fwIfProcName
Name of interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.47565.1.1.1.22.1.2
fwIfProcReceivedBytes
Number of good received bytes, corresponding to rx_packets.
For IEEE 802.3 devices should count the length of Ethernet
Frames excluding the FCS.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.3
fwIfProcReceivedPackets
Number of good packets received by the interface.
For hardware interfaces counts all good packets received from
the device by the host, including packets which host had to
drop at various stages of processing (even in t…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.4
fwIfProcReceivedErrs
Total number of bad packets received on this network device.
This counter must include events counted by rx_length_errors,
rx_crc_errors, rx_frame_errors and other errors not otherwise
counted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.5
fwIfProcReceivedDrop
Number of packets received but not processed,
e.g. due to lack of resources or unsupported protocol.
For hardware interfaces this counter may include packets
discarded due to L2 address filtering but should not include
…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.6
fwIfProcReceivedFifo
Historically the count of overflow events. Those events may be
reported in the receive descriptors or via interrupts, and may
not correspond one-to-one with dropped packets.
This statistics was used interchangeably with…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.7
fwIfProcReceivedFrame
Receiver frame alignment errors.
Part of aggregate frame errors in /proc/net/dev.
For IEEE 802.3 devices this counter should be equivalent to:
- 30.3.1.1.7 aAlignmentErrors
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.8
fwIfProcReceivedCompressed
Number of correctly received compressed packets.
This counters is only meaningful for interfaces which support
packet compression (e.g. CSLIP, PPP).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.9
fwIfProcReceivedMulticast
Multicast packets received.
For hardware interfaces this statistic is commonly calculated
at the device level (unlike rx_packets) and therefore may
include packets which did not reach the host.
For IEEE 802.3 devices th…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.10
fwIfProcTransmitBytes
Number of good transmitted bytes, corresponding to tx_packets.
For IEEE 802.3 devices should count the length of Ethernet
Frames excluding the FCS.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.11
fwIfProcTransmitPackets
Number of packets successfully transmitted.
For hardware interfaces counts packets which host was able to
successfully hand over to the device, which does not
necessarily mean that packets had been successfully
transmit…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.12
fwIfProcTransmitErrs
Total number of transmit problems.
This counter must include events counter by tx_aborted_errors,
tx_carrier_errors, tx_fifo_errors, tx_heartbeat_errors,
tx_window_errors and other errors not otherwise counted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.13
fwIfProcTransmitDrop
Number of packets dropped on their way to transmission,
e.g. due to lack of resources.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.14
fwIfProcTransmitFifo
Number of frame transmission errors due to device
FIFO underrun / underflow. This condition occurs when the
device begins transmission of a frame but is unable to deliver
the entire frame to the transmitter in time for …
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.15
fwIfProcTransmitColls
Number of collisions during packet transmissions.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.16
fwIfProcTransmitCarrier
Number of frame transmission errors due to loss of carrier
during transmission.
Part of aggregate carrier errors in /proc/net/dev.
For IEEE 802.3 devices this counter must be equivalent to:
- 30.3.1.1.13 aCarrierSenseEr…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.17
fwIfProcTransmitCompressed
Number of transmitted compressed packets.
This counters is only meaningful for interfaces which support
packet compression (e.g. CSLIP, PPP).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.47565.1.1.1.22.1.18