FIBROLAN-DEVICE-MIB Table View

Device Power Supply Unit (PSU) status table.

flDevicePsuStatusEntry row .1.3.6.1.4.1.4467.1000.10.1.100.1

The entries of the PSU status table

Indexes

flDevicePsuIndex

Column	Syntax	OID
flDevicePsuIndex The index of the PSU.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.4467.1000.10.1.100.1.1
flDevicePsuInstalled Indicates whether PSU is installed or not (in slot)	Enumeration Enumerated Values: 1 unknown 2 installed 3 notInstalled	.1.3.6.1.4.1.4467.1000.10.1.100.1.2
flDevicePsuStatus PSU operational status (supplying adequate power/voltage)	Enumeration Enumerated Values: 1 unknown 2 ok 3 fail	.1.3.6.1.4.1.4467.1000.10.1.100.1.3
flDevicePsuFanStatus PSU fan operational status (if applicable). singleFail indicates one of two (or more) fans have failed.	Enumeration Enumerated Values: 1 unknown 2 notApplicable 3 ok 4 fail 5 singleFail	.1.3.6.1.4.1.4467.1000.10.1.100.1.4
flDevicePsuAlarmsEnable Determine whether PSU traps are generated for this PSU slot. When disabled, the alarm status object should not be polled (will indicate no alarm).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4467.1000.10.1.100.1.5
flDevicePsuAlarmStatus This variable indicates the alarm status of the device's PSUs. fanDown indicates all fans of the power supply are down.	Enumeration Enumerated Values: 1 ok 2 psuNotInstalled 4 psuDown 8 fanDown 16 singleFanDown 32 singleFeedDown	.1.3.6.1.4.1.4467.1000.10.1.100.1.6
flDevicePsuStatusLastChange The value of MIB II's sysUpTime object at the time the PSU entered its current state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4467.1000.10.1.100.1.7

Device (remote) update table.
This table is used for uploading and
downloading of maintenance related files (i.e.
upgrades and configuration) from and to the
system.
In order to perform an update operation, the
following objects should be set (assuming the
operation is supported by the system):
- operation type
- remote file server type
- remote file server address
- operation direction (up/download)
- file name
After these have been set, the action may be
triggered by the start object.
Update status can be monitored via the status
and error status objects.

flDeviceUpdateEntry row .1.3.6.1.4.1.4467.1000.10.1.110.1

The entries of the device udpate table.

Indexes

flDeviceUpdateTableIndex

Column	Syntax	OID
flDeviceUpdateTableIndex Table index.	Unsigned32 Constraints: range: 0-0	.1.3.6.1.4.1.4467.1000.10.1.110.1.1
flDeviceUpdateType Update type (target).	Enumerationr/w Enumerated Values: 1 other 2 software 3 firmware 4 system 5 config 6 script	.1.3.6.1.4.1.4467.1000.10.1.110.1.2
flDeviceUpdateFileServerType The type of remote file server (e.g. TFTP), from which the update file will be retrieved, or to which it will be saved. The type is effectively the file transfer protocol used. If the desired protocol is not present in …	FIBROLAN-COMMON-MIBFlFileServerTyper/w Type Values: 1 other 2 ftp 3 tftp	.1.3.6.1.4.1.4467.1000.10.1.110.1.3
flDeviceUpdateFileServerAddress The IP address of the remote file server (e.g. TFTP), from which the update file will be retrieved, or to which it will be saved. Address must be a valid unicast IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4467.1000.10.1.110.1.4
flDeviceUpdateFileXferDirection The direction in which the update file transfer will be performed: to or from the remote server.	FIBROLAN-COMMON-MIBFlFileXferDirectionr/w Type Values: 1 getFromServer 2 putOnServer	.1.3.6.1.4.1.4467.1000.10.1.110.1.5
flDeviceUpdateFileName The name of the update file. Some systems may not support this object, in which case the name is set using the version name object. The file name may include a remote path.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4467.1000.10.1.110.1.6
flDeviceUpdateStart Trigger the update process. Setting this object to start(2) will initiate the update operation. This can be done only when the object's value is ready(0). If notReady(1) is indicated, the operation should not be attempt…	Enumerationr/w Enumerated Values: 0 ready 1 notReady 2 start	.1.3.6.1.4.1.4467.1000.10.1.110.1.7
flDeviceUpdateStatus Status of the update process. Some systems or update processes may support this object partially (i.e. not implement all states).	Enumeration Enumerated Values: 1 other 2 notStarted 3 loadingFile 4 savingFile 5 verifyingFile 6 updateInProgress 7 updateComplete 8 updateIncomplete 9 updateFailed	.1.3.6.1.4.1.4467.1000.10.1.110.1.8
flDeviceUpdateErrorStatus Status of the update process. Some systems or update processes may support this object partially (i.e. not implement all errors).	Enumeration Enumerated Values: 1 noError 2 other 3 fileNotFound 4 serverTimeout 5 fileInvalid 6 updateError	.1.3.6.1.4.1.4467.1000.10.1.110.1.9
flDeviceUpdateErrorCode Indicates the error code of the last update operation. If no errors occured (operation completed successfully) this object should be 0. The meaning of the error code depends on the update type. For example: in a configu…	Integer32 Constraints: range: 0-10000	.1.3.6.1.4.1.4467.1000.10.1.110.1.10
flDeviceUpdateUrl The URL string of the update file. In most systems, when this field is used, other fields (e.g. IP address) will not be used.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4467.1000.10.1.110.1.11

CPU Status table. Provides information regarding
system's CPU(s) and memory resources.
This table is extending the relevant entries
in the Entity MIB (physical, for CPUs).
This table has some common objects with the
HOST-RESOURCES-MIB (RFC2790).

flDeviceCpuStatusEntry row .1.3.6.1.4.1.4467.1000.10.1.120.1

The entries of the CPU Status table.

Indexes

flDeviceCpuIndex

Column	Syntax	OID
flDeviceCpuIndex Index of the CPU table (will be 0 only in most systems).	Integer32 Constraints: range: 0-2	.1.3.6.1.4.1.4467.1000.10.1.120.1.1
flDeviceCpuUtilization Utilization (load) of the CPU in percents of maximum capacity.	FIBROLAN-COMMON-MIBFlUtilization Type Constraints: range: 0..100	.1.3.6.1.4.1.4467.1000.10.1.120.1.2
flDeviceMemoryUtilization Utilization (usage) of the memory in percents of physical memory size.	FIBROLAN-COMMON-MIBFlUtilization Type Constraints: range: 0..100	.1.3.6.1.4.1.4467.1000.10.1.120.1.3
flDeviceNvMemoryUtilization Utilization (usage) of the NV memory in percents of physical NV memory size.	FIBROLAN-COMMON-MIBFlUtilization Type Constraints: range: 0..100	.1.3.6.1.4.1.4467.1000.10.1.120.1.4
flDeviceCpuAlarmsEnable Determine whether CPU traps are generated. When disabled, the alarm status object should not be polled (will indicate no alarm).	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4467.1000.10.1.120.1.5
flDeviceCpuAlarmStatus This variable indicates the alarm status of the device's CPU(s) and memory. This object is a bitmap represented as a sum; therefore, it can represent multiple alarms. The noAlarm bit must be set if and only if no other …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4467.1000.10.1.120.1.6
flDeviceCpuStatusLastChange The value of MIB II's sysUpTime object at the time the CPU entered its current state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4467.1000.10.1.120.1.7

Alarm thresholds table. This table provides
configuration facilities for threshold
crossing alarms (TCA) defined in this MIB
module.

flDeviceAlarmThresholdEntry row .1.3.6.1.4.1.4467.1000.10.1.500.1

The entries of the alarm threshold table.

Indexes

flDeviceAlarmThresholdTableIndex

Column	Syntax	OID
flDeviceAlarmThresholdTableIndex Table index.	Unsigned32 Constraints: range: 0-31	.1.3.6.1.4.1.4467.1000.10.1.500.1.1
flDeviceAlarmThresholdType The type of the threshold (enumerated). This object is expected to be extended with new types in future revisions.	Enumeration Enumerated Values: 1 other 2 temperatureHigh 3 temperatureLow 4 cpuUtilHigh 5 memoryUtilHigh	.1.3.6.1.4.1.4467.1000.10.1.500.1.2
flDeviceAlarmThresholdValue The threshold value beyond which the alarm is active. Note: the type of the threshold determines whether this value is the upper bound for the alarm activation (e.g. temperatureHigh) or the lower bound (e.g. temperature…	Integer32r/w Constraints: range: -100-100	.1.3.6.1.4.1.4467.1000.10.1.500.1.3
flDeviceAlarmThresholdClearValue The threshold value below which the alarm is cleared. Note: the type of the threshold determines whether this value is the upper bound for the alarm activation (e.g. temperatureLow) or the lower bound (e.g. temperatureH…	Integer32r/w Constraints: range: -100-100	.1.3.6.1.4.1.4467.1000.10.1.500.1.4