FIBRE-CHANNEL-FE-MIB Table View

A table that contains, one entry for each module in the
Fabric Element, information of the modules.

fcFeModuleEntry row .1.3.6.1.2.1.75.1.1.4.1

An entry containing the configuration parameters of a
module.

Indexes

fcFeModuleIndex

Column	Syntax	OID
fcFeModuleIndex This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity.	FcFeModuleIndex	.1.3.6.1.2.1.75.1.1.4.1.1
fcFeModuleDescr A textual description of the module. This value should include the full name and version identification of the module.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.1.4.1.2
fcFeModuleObjectID The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of mo…	ObjectIdentifier	.1.3.6.1.2.1.75.1.1.4.1.3
fcFeModuleOperStatus This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) the module is under testing; and faulty(4) the module is…	Enumeration Enumerated Values: 1 online 2 offline 3 testing 4 faulty	.1.3.6.1.2.1.75.1.1.4.1.4
fcFeModuleLastChange This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.75.1.1.4.1.5
fcFeModuleFxPortCapacity The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be co…	FcFeFxPortCapacity	.1.3.6.1.2.1.75.1.1.4.1.6
fcFeModuleName The Name_Identifier of the module.	FcNameIdr/w Type Constraints: range: 8	.1.3.6.1.2.1.75.1.1.4.1.7

A table that contains, one entry for each FxPort in the
Fabric Element, configuration and service parameters of the
FxPorts.

fcFxPortEntry row .1.3.6.1.2.1.75.1.1.5.1

An entry containing the configuration and service parameters
of a FxPort.

Indexes

fcFeModuleIndex fcFxPortIndex

Column	Syntax	OID
fcFxPortIndex This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is …	FcFeFxPortIndex	.1.3.6.1.2.1.75.1.1.5.1.1
fcFxPortName The World_wide Name of this FxPort. Each FxPort has a unique Port World_wide Name within the Fabric.	FcNameId Type Constraints: range: 8	.1.3.6.1.2.1.75.1.1.5.1.2
fcFxPortFcphVersionHigh The highest or most recent version of FC-PH that the FxPort is configured to support.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.1.5.1.3
fcFxPortFcphVersionLow The lowest or earliest version of FC-PH that the FxPort is configured to support.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.1.5.1.4
fcFxPortBbCredit The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if app…	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.2.1.75.1.1.5.1.5
fcFxPortRxBufSize The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort.	bytesFcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.2.1.75.1.1.5.1.6
fcFxPortRatov The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (see next object)…	millisecondsMilliSeconds	.1.3.6.1.2.1.75.1.1.5.1.7
fcFxPortEdtov The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition.	millisecondsMilliSeconds	.1.3.6.1.2.1.75.1.1.5.1.8
fcFxPortCosSupported A value indicating the set of Classes of Service supported by the FxPort.	FcCosCap Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.2.1.75.1.1.5.1.9
fcFxPortIntermixSupported A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.1.5.1.10
fcFxPortStackedConnMode A value indicating the mode of Stacked Connect supported by the FxPort.	FcStackedConnMode Type Values: 1 none 2 transparent 3 lockedDown	.1.3.6.1.2.1.75.1.1.5.1.11
fcFxPortClass2SeqDeliv A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.1.5.1.12
fcFxPortClass3SeqDeliv A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.1.5.1.13
fcFxPortHoldTime The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter.	microsecondsMicroSeconds	.1.3.6.1.2.1.75.1.1.5.1.14

A table that contains, one entry for each FxPort in the
Fabric Element, operational status and parameters of the
FxPorts.

fcFxPortStatusEntry row .1.3.6.1.2.1.75.1.2.1.1

An entry containing operational status and parameters of a
FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortID The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login.	FcAddressId Type Constraints: range: 3	.1.3.6.1.2.1.75.1.2.1.1.1
fcFxPortBbCreditAvailable The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit.	buffersSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.2.1.1.2
fcFxPortOperMode The current operational mode of the FxPort.	Enumeration Enumerated Values: 1 unknown 2 fPort 3 flPort	.1.3.6.1.2.1.75.1.2.1.1.3
fcFxPortAdminMode The desired operational mode of the FxPort.	Enumerationr/w Enumerated Values: 2 fPort 3 flPort	.1.3.6.1.2.1.75.1.2.1.1.4

A table that contains, one entry for each FxPort in the
Fabric Element, physical level status and parameters of the
FxPorts.

fcFxPortPhysEntry row .1.3.6.1.2.1.75.1.2.2.1

An entry containing physical level status and parameters of
a FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortPhysAdminStatus The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric…	Enumerationr/w Enumerated Values: 1 online 2 offline 3 testing	.1.3.6.1.2.1.75.1.2.2.1.1
fcFxPortPhysOperStatus The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPh…	Enumeration Enumerated Values: 1 online 2 offline 3 testing 4 linkFailure	.1.3.6.1.2.1.75.1.2.2.1.2
fcFxPortPhysLastChange The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.75.1.2.2.1.3
fcFxPortPhysRttov The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization.	millisecondsMilliSecondsr/w	.1.3.6.1.2.1.75.1.2.2.1.4

A table that contains, one entry for each NxPort attached
to a particular FxPort in the Fabric Element, services
parameters established from the most recent Fabric Login,
explicit or implicit. Note that an FxPort may have one or
more NxPort attached to it.

fcFxLoginEntry row .1.3.6.1.2.1.75.1.2.3.1

An entry containing service parameters established from a
successful Fabric Login.

Indexes

fcFeModuleIndex fcFxPortIndex fcFxPortNxLoginIndex

Column	Syntax	OID
fcFxPortNxLoginIndex The object identifies the associated NxPort in the attachment for which the entry contains information.	FcFeNxPortIndex Type Constraints: range: 1..126	.1.3.6.1.2.1.75.1.2.3.1.1
fcFxPortFcphVersionAgreed The version of FC-PH that the FxPort has agreed to support from the Fabric Login	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.2.3.1.2
fcFxPortNxPortBbCredit The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer-to- buffer flow control in the direction from FxPort to Nx…	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.2.1.75.1.2.3.1.3
fcFxPortNxPortRxDataFieldSize The Receive Data Field Size of the attached NxPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort.	bytesFcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.2.1.75.1.2.3.1.4
fcFxPortCosSuppAgreed A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request.	FcCosCap Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.2.1.75.1.2.3.1.5
fcFxPortIntermixSuppAgreed A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.2.3.1.6
fcFxPortStackedConnModeAgreed A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agreed.	FcStackedConnMode Type Values: 1 none 2 transparent 3 lockedDown	.1.3.6.1.2.1.75.1.2.3.1.7
fcFxPortClass2SeqDelivAgreed A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service has been agreed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.2.3.1.8
fcFxPortClass3SeqDelivAgreed A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.2.3.1.9
fcFxPortNxPortName The port name of the attached NxPort.	FcNameId Type Constraints: range: 8	.1.3.6.1.2.1.75.1.2.3.1.10
fcFxPortConnectedNxPort The address identifier of the destination NxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If this FxPort is not engaged in a connection, then the value of this object is '000…	FcAddressId Type Constraints: range: 3	.1.3.6.1.2.1.75.1.2.3.1.11
fcFxPortBbCreditModel This object identifies the BB_Credit model used by the FxPort.	FcBbCreditModelr/w Type Values: 1 regular 2 alternate	.1.3.6.1.2.1.75.1.2.3.1.12

A table that contains, one entry for each FxPort, counters
that record the numbers of errors detected.

fcFxPortErrorEntry row .1.3.6.1.2.1.75.1.3.1.1

An entry containing error counters of a FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortLinkFailures The number of link failures detected by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.1
fcFxPortSyncLosses The number of loss of synchronization detected by the FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.2
fcFxPortSigLosses The number of loss of signal detected by the FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.3
fcFxPortPrimSeqProtoErrors The number of primitive sequence protocol errors detected by the FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.4
fcFxPortInvalidTxWords The number of invalid transmission word detected by the FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.5
fcFxPortInvalidCrcs The number of invalid CRC detected by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.6
fcFxPortDelimiterErrors The number of Delimiter Errors detected by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.7
fcFxPortAddressIdErrors The number of address identifier errors detected by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.8
fcFxPortLinkResetIns The number of Link Reset Protocol received by this FxPort from the attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.9
fcFxPortLinkResetOuts The number of Link Reset Protocol issued by this FxPort to the attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.10
fcFxPortOlsIns The number of Offline Sequence received by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.11
fcFxPortOlsOuts The number of Offline Sequence issued by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.3.1.1.12

A table that contains, one entry for each FxPort in the
Fabric Element, Class 1 accounting information recorded
since the management agent has re-initialized.

fcFxPortC1AccountingEntry row .1.3.6.1.2.1.75.1.4.1.1

An entry containing Class 1 accounting information for each
FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortC1InFrames The number of Class 1 frames (other than Class 1 connect- request) received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.1
fcFxPortC1OutFrames The number of Class 1 frames (other than Class 1 connect- request) delivered through this FxPort to its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.2
fcFxPortC1InOctets The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.3
fcFxPortC1OutOctets The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.4
fcFxPortC1Discards The number of Class 1 frames discarded by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.5
fcFxPortC1FbsyFrames The number of F_BSY frames generated by this FxPort against Class 1 connect-request.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.6
fcFxPortC1FrjtFrames The number of F_RJT frames generated by this FxPort against Class 1 connect-request.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.7
fcFxPortC1InConnections The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect- request.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.8
fcFxPortC1OutConnections The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.1.1.9
fcFxPortC1ConnTime The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time is counted from after a connect-request has been accepted until the connection is disengaged, either by an EOFdt or Link R…	millisecondsMilliSeconds	.1.3.6.1.2.1.75.1.4.1.1.10

A table that contains, one entry for each FxPort in the
Fabric Element, Class 2 accounting information recorded
since the management agent has re-initialized.

fcFxPortC2AccountingEntry row .1.3.6.1.2.1.75.1.4.2.1

An entry containing Class 2 accounting information for each
FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortC2InFrames The number of Class 2 frames received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.1
fcFxPortC2OutFrames The number of Class 2 frames delivered through this FxPort to its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.2
fcFxPortC2InOctets The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.3
fcFxPortC2OutOctets The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.4
fcFxPortC2Discards The number of Class 2 frames discarded by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.5
fcFxPortC2FbsyFrames The number of F_BSY frames generated by this FxPort against Class 2 frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.6
fcFxPortC2FrjtFrames The number of F_RJT frames generated by this FxPort against Class 2 frames.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.2.1.7

A table that contains, one entry for each FxPort in the
Fabric Element, Class 3 accounting information recorded
since the management agent has re-initialized.

fcFxPortC3AccountingEntry row .1.3.6.1.2.1.75.1.4.3.1

An entry containing Class 3 accounting information for each
FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortC3InFrames The number of Class 3 frames received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.3.1.1
fcFxPortC3OutFrames The number of Class 3 frames delivered through this FxPort to its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.3.1.2
fcFxPortC3InOctets The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.3.1.3
fcFxPortC3OutOctets The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.3.1.4
fcFxPortC3Discards The number of Class 3 frames discarded by this FxPort.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.75.1.4.3.1.5

A table that contains, one entry for each FxPort, the
capabilities of the port within the Fabric Element.

fcFxPortCapEntry row .1.3.6.1.2.1.75.1.5.1.1

An entry containing the Cap of a FxPort.

Indexes

No indexes recorded

Column	Syntax	OID
fcFxPortCapFcphVersionHigh The highest or most recent version of FC-PH that the FxPort is capable of supporting.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.5.1.1.1
fcFxPortCapFcphVersionLow The lowest or earliest version of FC-PH that the FxPort is capable of supporting.	FcphVersion Type Constraints: range: 0..255	.1.3.6.1.2.1.75.1.5.1.1.2
fcFxPortCapBbCreditMax The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.2.1.75.1.5.1.1.3
fcFxPortCapBbCreditMin The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort.	buffersFcBbCredit Type Constraints: range: 0..32767	.1.3.6.1.2.1.75.1.5.1.1.4
fcFxPortCapRxDataFieldSizeMax The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.	bytesFcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.2.1.75.1.5.1.1.5
fcFxPortCapRxDataFieldSizeMin The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort.	bytesFcRxDataFieldSize Type Constraints: range: 128..2112	.1.3.6.1.2.1.75.1.5.1.1.6
fcFxPortCapCos A value indicating the set of Classes of Service that the FxPort is capable of supporting.	FcCosCap Type Values: 0 classF 1 class1 2 class2 3 class3 4 class4 5 class5 6 class6	.1.3.6.1.2.1.75.1.5.1.1.7
fcFxPortCapIntermix A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 servic…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.5.1.1.8
fcFxPortCapStackedConnMode A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting.	FcStackedConnMode Type Values: 1 none 2 transparent 3 lockedDown	.1.3.6.1.2.1.75.1.5.1.1.9
fcFxPortCapClass2SeqDeliv A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.5.1.1.10
fcFxPortCapClass3SeqDeliv A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.75.1.5.1.1.11
fcFxPortCapHoldTimeMax The maximum holding time (in microseconds) that the FxPort is capable of supporting.	microsecondsMicroSeconds	.1.3.6.1.2.1.75.1.5.1.1.12
fcFxPortCapHoldTimeMin The minimum holding time (in microseconds) that the FxPort is capable of supporting.	microsecondsMicroSeconds	.1.3.6.1.2.1.75.1.5.1.1.13