F5-OS-TENANT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

tenantStateTable

table

.1.3.6.1.4.1.12276.1.5.1.1.1 · 1 row entry · 28 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantStateTable'

Information about the tenant state data.

tenantStateEntry row .1.3.6.1.4.1.12276.1.5.1.1.1.1

Information about the tenant state data.

Indexes

tenantName

Column Syntax OID

tenantName

Primary index of Tenant Configuration Table

TenantIndex

Type Constraints:
range: 1..255

.1.3.6.1.4.1.12276.1.5.1.1.1.1.1

tenantType

Tenant type

Enumeration

Enumerated Values:

0	bigip
1	bigipnext
2	generic

.1.3.6.1.4.1.12276.1.5.1.1.1.1.2

tenantImage

User-specified image for tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.3

tenantDeploymentFile

User-specified deployment specification for the tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.4

tenantMgmtIP

User-specified mgmt-ip for the tenant management access

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.12276.1.5.1.1.1.1.5

tenantPrefixLength

User-specified prefix-length for the tenant mgmt-ip

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.12276.1.5.1.1.1.1.6

tenantDagIPv6PrefixLength

Tenant default value of IPv6 networking mask used by disaggregator algorithms

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.12276.1.5.1.1.1.1.7

tenantGateway

User-specified gateway for the tenant mgmt-ip

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.12276.1.5.1.1.1.1.8

tenantCryptos

Enable crypto devices for the tenant

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12276.1.5.1.1.1.1.9

tenantVcpuCoresPerNode

User-specified number of logical cpu cores for the tenant

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12276.1.5.1.1.1.1.10

tenantMemory

User-specified memory in MBs for the tenant

MBSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12276.1.5.1.1.1.1.11

tenantStorageSize

User-specified storage information

GBSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12276.1.5.1.1.1.1.12

tenantRunningState

User-specified desired state for the tenant

Enumeration

Enumerated Values:

0	configured
1	provisioned
2	deployed

.1.3.6.1.4.1.12276.1.5.1.1.1.1.13

tenantMacDataSize

Configuration data for MAC block size per tenant

SNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12276.1.5.1.1.1.1.14

tenantApplianceMode

Appliance mode can be enabled/disabled at tenant level

Enumeration

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12276.1.5.1.1.1.1.15

tenantUnitKeyHash

The sha512 hash of the unit key assigned to the tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.16

tenantFloatingAddress

Tenant HA floating management IP

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.12276.1.5.1.1.1.1.17

tenantHAState

HA state reported by the tenant

Enumeration

Enumerated Values:

0	unknown
1	standalone
2	active
3	standby

.1.3.6.1.4.1.12276.1.5.1.1.1.1.18

tenantNameSpace

Tenant namespace

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.19

tenantPrimarySlot

Indicates which slot is the primary if this is a multi-blade tenant

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12276.1.5.1.1.1.1.20

tenantQatVFCount

Populate qat vf count based on number of logical cpu cores for the tenant

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12276.1.5.1.1.1.1.21

tenantImageVersion

Image version of tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.22

tenantStatus

Provide status of the tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.23

tenantTargetDeploymentFile

Target deployment file for the tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.24

tenantTargetImage

Target deployment specification for the tenant

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12276.1.5.1.1.1.1.25

tenantUpgradeStatus

Upgrade status of tenant

Enumeration

Enumerated Values:

0	notstarted
1	inprogress
2	success
3	failed

.1.3.6.1.4.1.12276.1.5.1.1.1.1.26

tenantBaseMac

Provide tenant's base MAC

SNMPv2-TCPhysAddress

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.12276.1.5.1.1.1.1.27

tenantMgmtMac

Provide tenant's mgmt MAC

SNMPv2-TCPhysAddress

Description:

Represents media- or physical-level addresses.

.1.3.6.1.4.1.12276.1.5.1.1.1.1.28

tenantVirtualWiresTable

table

.1.3.6.1.4.1.12276.1.5.1.2.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantVirtualWiresTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantVirtualWiresTable'

Information about the tenant virtual wires configuration.

tenantVirtualWiresEntry row .1.3.6.1.4.1.12276.1.5.1.2.1.1

Information about the tenant virtual wires configuration.

Indexes

tenantName tenantVirtualWire

Column	Syntax	OID
tenantVirtualWire User-specified virtual-wire for the tenant	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.2.1.1.2`

tenantVlansTable

table

.1.3.6.1.4.1.12276.1.5.1.3.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantVlansTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantVlansTable'

Information about the tenant vlan configuration.

tenantVlansEntry row .1.3.6.1.4.1.12276.1.5.1.3.1.1

Information about the tenant vlan configuration.

Indexes

tenantName tenantVlan

Column	Syntax	OID
tenantVlan User-specified vlan-id from vlan table for the tenant	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12276.1.5.1.3.1.1.2`

tenantNodesTable

table

.1.3.6.1.4.1.12276.1.5.1.4.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantNodesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantNodesTable'

Information about the tenant node configuration.

tenantNodesEntry row .1.3.6.1.4.1.12276.1.5.1.4.1.1

Information about the tenant node configuration.

Indexes

tenantName tenantNode

Column	Syntax	OID
tenantNode User-specified node-number(s) in the partition to schedule the tenant	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.12276.1.5.1.4.1.1.2`

tenantCPUAllocationsStateTable

table

.1.3.6.1.4.1.12276.1.5.1.5.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantCPUAllocationsStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantCPUAllocationsStateTable'

Information about the tenant CPU allocations

tenantCPUAllocationsStateEntry row .1.3.6.1.4.1.12276.1.5.1.5.1.1

Information about the tenant CPU allocations

Indexes

tenantName tenantNode tenantCPU

Column	Syntax	OID
tenantCPU Allocated CPU for specific node	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.5.1.1.3`

tenantFeatureFlagsStateTable

table

.1.3.6.1.4.1.12276.1.5.1.6.1 · 1 row entry · 2 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantFeatureFlagsStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantFeatureFlagsStateTable'

Flags describing various features the tenant uses or supports

tenantFeatureFlagsStateEntry row .1.3.6.1.4.1.12276.1.5.1.6.1.1

Flags describing various features the tenant uses or supports

Indexes

tenantName

Column Syntax OID

tenantClusteringAsServiceFlag

Clustering as a partition service on/off

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12276.1.5.1.6.1.1.2

tenantStatsStreamCapableFlag

Tenant is capable to stream stats

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12276.1.5.1.6.1.1.3

tenantInstancesStateTable

table

.1.3.6.1.4.1.12276.1.5.1.7.1 · 1 row entry · 8 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantInstancesStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantInstancesStateTable'

List the tenant instance(s)

tenantInstancesStateEntry row .1.3.6.1.4.1.12276.1.5.1.7.1.1

List the tenant instance(s)

Indexes

tenantName tenantNode tenantPodName

Column	Syntax	OID
tenantPodName Provide tenant's pod name	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.3`
tenantInstanceId Provide tenant's instance id	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.4`
tenantInstanceSlot Provide tenant's slot id	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.5`
tenantInstancePhase Provide tenant's instance phase	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.6`
tenantInstanceCreationTime Provide tenant's instance creation time	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.7`
tenantInstanceReadyTime Provide tenant's instance ready time	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.8`
tenantInstanceStatus Provide tenant's instance status	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.9`
tenantInstanceMgmtMac Provide tenant's mgmt MAC	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.12276.1.5.1.7.1.1.10`

tenantMacBlockStateTable

table

.1.3.6.1.4.1.12276.1.5.1.8.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantMacBlockStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantMacBlockStateTable'

Information about the tenant MAC

tenantMacBlockStateEntry row .1.3.6.1.4.1.12276.1.5.1.8.1.1

Information about the tenant MAC

Indexes

tenantName tenantMAC

Column	Syntax	OID
tenantMAC MAC address per tenant	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.8.1.1.2`

tenantSubModulesStateTable

table

.1.3.6.1.4.1.12276.1.5.1.9.1 · 1 row entry · 7 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantSubModulesStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantSubModulesStateTable'

Information about the tenant sub modules

tenantSubModulesStateEntry row .1.3.6.1.4.1.12276.1.5.1.9.1.1

Information about the tenant sub modules

Indexes

tenantName tenantSubModuleId

Column	Syntax	OID
tenantSubModuleId Unique ID per sub-module of the tenant	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.2`
tenantSubModuleMAC Mac address allocated to the sub-module	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.3`
tenantSubModuleDefaultServiceId Service ID allocated to the sub-module	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.4`
tenantSubModuleName Name of the sub-module	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.5`
tenantSubModuleIpAddr IP Address for the sub-module	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.6`
tenantSubModuleFloatingIpAddr Floating IP Address for the sub-module	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.7`
tenantSubModulePrefixLength Subnet prefix-length for the sub-module ipaddr	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.12276.1.5.1.9.1.1.8`

tenantSubModuleVlansStateTable

table

.1.3.6.1.4.1.12276.1.5.1.10.1 · 1 row entry · 1 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantSubModuleVlansStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantSubModuleVlansStateTable'

Information about the tenant sub module vlans

tenantSubModuleVlansStateEntry row .1.3.6.1.4.1.12276.1.5.1.10.1.1

Information about the tenant sub module vlans

Indexes

tenantName tenantSubModuleId tenantSubModuleVlan

Column	Syntax	OID
tenantSubModuleVlan List of vlans set on the sub-module	Integer32 Constraints: `range: 1-4096`	`.1.3.6.1.4.1.12276.1.5.1.10.1.1.3`

tenantSubModuleHugepagesStateTable

table

.1.3.6.1.4.1.12276.1.5.1.11.1 · 1 row entry · 2 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantSubModuleHugepagesStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantSubModuleHugepagesStateTable'

Information about the tenant sub module hugepages

tenantSubModuleHugepagesStateEntry row .1.3.6.1.4.1.12276.1.5.1.11.1.1

Information about the tenant sub module hugepages

Indexes

tenantName tenantSubModuleId tenantSubModuleHugepageSlot

Column	Syntax	OID
tenantSubModuleHugepageSlot Slot id associated with hugepage path	Integer32 Constraints: `range: 1-32`	`.1.3.6.1.4.1.12276.1.5.1.11.1.1.3`
tenantSubModuleHugepagePath Hugepage path for the sub-module	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.12276.1.5.1.11.1.1.4`

tenantUpgradeEventsStateTable

table

.1.3.6.1.4.1.12276.1.5.1.12.1 · 1 row entry · 2 columns

Open in standard view

Uses the f5 variant from /opt/observium/mibs/f5.

Command help

Walk tenantUpgradeEventsStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F5-OS-TENANT-MIB' -M '/opt/observium/mibs/f5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F5-OS-TENANT-MIB::tenantUpgradeEventsStateTable'

Information about the tenant upgrade events

tenantUpgradeEventsStateEntry row .1.3.6.1.4.1.12276.1.5.1.12.1.1

Information about the tenant upgrade events

Indexes

tenantName tenantUpgradeEventIndex

Column	Syntax	OID
tenantUpgradeEventIndex Arbitrary index for tenant upgrade event	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12276.1.5.1.12.1.1.2`
tenantUpgradeEventStatus Tenant upgrade status	String Type Constraints: `range: 1..1023`	`.1.3.6.1.4.1.12276.1.5.1.12.1.1.3`