F3-EOTDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
24

vcgTable

table
.1.3.6.1.4.1.2544.1.12.17.1.1 · 1 row entry · 12 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk vcgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-EOTDM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-EOTDM-MIB::vcgTable' 
A list of entries corresponding to virtual concatenate groups.
vcgEntry row .1.3.6.1.4.1.2544.1.12.17.1.1.1
A conceptual row in the vcgTable.
Indexes
Column Syntax OID
vcgIndex
An integer index value used to uniquely identify this vcg within a card.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.1
vcgIfIndex
This object has the same value as ifIndex for vcg.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.2
vcgAssociatedEthernetPort
This object describes the related Ethernet Port of the vcg.
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.3
vcgAdminState
This object represents the Administrative State of the vcg.
CM-COMMON-MIBAdminStater/w
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.4
vcgOperationalState
This object represents the Operational State of the vcg.
CM-COMMON-MIBOperationalState
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.5
vcgSecondaryState
This object represents the Secondary State of the vcg.
CM-COMMON-MIBSecondaryState
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.6
vcgType
Type of paths in this VCG. All paths in this VCG are the same type.
This is a required field when creating a VCG, and can not be
changed on an existing VCG.
See the definition of VcType for more details.
VcgType
Type Values:
0none
1t1
2e1
3t3
4e3
5vc12
6vc3
7vc4
8vt15
9sts1
10sts3c
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.7
vcgLcasEnabled
This object provides whether Lcas is enabled/disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.8
vcgWtrTimer
This object specifies wait to restore(WTR) time for LCAS protocol.
When creating VCG with LCAS enabled, it is the default value,
says 5 minutes. When creating VCG with LCAS disabled, it is 0 (means
that the WTR is disab…
WtrTimer/w
Type Constraints:
range: 0..12
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.9
vcgHoldOffTimer
This object specifies hold off time for LCAS protocol.
When creating VCG with LCAS enabled, it is the default value,
says 0 ms. When creating VCG with LCAS disabled, it is 0 ms.
HoldOffTimer/w
Type Constraints:
range: 0..100
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.10
vcgClearWtrTimer
This object will trigger an action.
When writing with '1', a 'clear WTR timer' action for all paths in
the VCG is triggered. Writing '0' is no effect.
When reading, it always returns 0.
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.11
vcgRowStatus
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.17.1.1.1.12

vcgMemberTable

table
.1.3.6.1.4.1.2544.1.12.17.1.2 · 1 row entry · 12 columns
Open in standard view
Uses the adva variant from /opt/observium/mibs/adva.
Command help
Walk vcgMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'F3-EOTDM-MIB' -M '/opt/observium/mibs/adva:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'F3-EOTDM-MIB::vcgMemberTable' 
A list of entries corresponding to VCGs. Each entry of the table
represents a path which is allocated to a VCG.
vcgMemberEntry row .1.3.6.1.4.1.2544.1.12.17.1.2.1
A conceptual row in the vcgMemberTable.
Indexes
Column Syntax OID
vcgMemberIndex
An integer index value used to uniquely identify this vcg member.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.1
vcgMemberIfIndex
This object has the same value as ifIndex for
vcg path. An integer index value used to
uniquely identify this vcg path.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.2
vcgMemberRowStatus
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.3
vcgMemberSoSendSeq
As the source side, this object reports the sequence number sent
to the sink side. The sequence number is determined by the LCAS
protocol (when LCAS is enabled) or by the order that each path was
added into the VCG (whe…
Integer32
Constraints:
range: -1-63
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.4
vcgMemberSoLcasSendCtrl
As the source side, this object reports the CTRL status which is
sent to the sink side. The CTRL status is determined by the LCAS
protocol.
When LCAS is not used, the value 'ctrlNotAppl' is returned.
CtrlState
Type Values:
0ctrlNotAppl
1ctrlFixed
2ctrlAdd
3ctrlNorm
4ctrlEos
5ctrlIdle
6ctrlDnu
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.5
vcgMemberSoLcasRecvMst
As the source side, this object reports the member status which is
received from sink side. The member status is determined by the
LCAS protocol.
When LCAS is not used, the value 'mstNotAppl' is returned.
MstState
Type Values:
0mstNotAppl
1mstOk
2mstFail
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.6
vcgMemberSoLcasState
This object reports the current source status of this path as
determined by the LCAS protocol. When LCAS is not in use,
the value 'srcNotAppl' is returned.
LcasSoState
Type Values:
0srcNotAppl
1srcIdle
2srcAdd
3srcNorm
4srcDnu
5srcRemove
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.7
vcgMemberSkRecvSeq
As the sink side, this object reports the sequence number which is
received from source side. If SQ is invalid, -1 is returned.
Integer32
Constraints:
range: -1-63
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.8
vcgMemberSkRecvExpectSeq
As the sink side, this object reports the sequence number expected.
If LCAS is enabled, this value is -1. Otherwise, it's the order that
each path was added into the VCG, starting from 0.
If SQ is invalid, -1 is returne…
Integer32
Constraints:
range: -1-63
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.9
vcgMemberSkLcasRecvCtrl
As the sink side, this object reports the CTRL status which is
received from source side. The CTRL status is determined by the
LCAS protocol. When LCAS is not used, the value 'ctrlNotAppl'
is returned.
CtrlState
Type Values:
0ctrlNotAppl
1ctrlFixed
2ctrlAdd
3ctrlNorm
4ctrlEos
5ctrlIdle
6ctrlDnu
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.10
vcgMemberSkLcasSendMst
As the sink side, this object reports the member status which is
sent to source side. The 'member status' is determined by the status
of received path member. When LCAS is not used, the value 'mstNotAppl'
is returned.
MstState
Type Values:
0mstNotAppl
1mstOk
2mstFail
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.11
vcgMemberSkLcasState
This object reports the current sink status of this path as
determined by the LCAS protocol. When LCAS is not in use,
the value 'sinkNotAppl' is returned.
LcasSkState
Type Values:
0sinkNotAppl
1sinkIdle
2sinkOk
3sinkFail
 .1.3.6.1.4.1.2544.1.12.17.1.2.1.12