EdgeSwitch-ROUTING6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
74

agentIpv6InterfaceTable

table
.1.3.6.1.4.1.4413.1.1.30.1.2 · 1 row entry · 8 columns
Open in standard view
agentIpv6InterfaceEntry entry .1.3.6.1.4.1.4413.1.1.30.1.2.1
Indexes
agentIpv6InterfaceIfIndex
Column Syntax OID
agentIpv6InterfaceIfIndex
The IfIndex associated with this instance.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.1
agentIpv6InterfaceMtuValue
Configures the MTU value for this interface.If it is not yet configured,
retrieving the value of this object results in a zero value.
Setting the value zero to this object effectively un-configures the MTU.
Unsigned32r/w
Constraints:
range: 1280-1500
range: 0-0
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.2
agentIpv6InterfaceDadTransmits
Configures the dad transmits value for this interface.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.3
agentIpv6InterfaceLinkLocalOnly
When enabled, interface is capable of ipv6 operation without a global address.
In this case, an eui-64 based link-local address is used.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.4
agentIpv6InterfaceIcmpUnreachables
If this object is enable, it indicates that ICMPv6 unreachables can be sent on this
interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.5
agentIpv6InterfaceAutoconfig
If this object is enabled, it indicates that the IPv6 address
is automatically generated using IPv6 stateless address auto configuration.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.6
agentIpv6InterfaceDhcpClient
If this object is enabled, the interface uses DHCPv6 Client
protocol to acquire an IPv6 address.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.7
agentIpv6InterfaceIcmpRedirects
Enable/Disable the sending of ICMPv6 redirect messages
in the redirect scenario where the forwarded packet
is sent out through the same interface on which the
packet was received.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.2.1.8

agentIpv6RouterAdvertisementTable

table
.1.3.6.1.4.1.4413.1.1.30.1.3 · 1 row entry · 9 columns
Open in standard view 
There is no global administrative flag for router advertisement.  The global
routing flag (agentIpv6RoutingMode) will be used for this purpose.  If routing
is disabled, router advertisement is disabled as well.
agentIpv6RouterAdvertisementEntry entry .1.3.6.1.4.1.4413.1.1.30.1.3.1
Indexes
agentIpv6RouterAdvertisementIfIndex
Column Syntax OID
agentIpv6RouterAdvertisementIfIndex
Interface Number to configure Router Advertisement on.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.1
agentIpv6RouterAdvertisementSuppressMode
Enable or disable router advertisement suppression on the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.2
agentIpv6RouterAdvertisementMaxAdvertisementInterval
Maximum time allowed between sending router advertisements
from the interface.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.3
agentIpv6RouterAdvertisementAdvertisementLifetime
Value of lifetime field of router advertisement sent from
the interface.

This value must be greater than or equal to
agentIpv6RouterAdvertisementMaxAdvertisementInterval.
Integer32r/w
Constraints:
range: 4-65520
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.4
agentIpv6RouterAdvertisementNbrSolicitInterval
Value of retrans time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.5
agentIpv6RouterAdvertisementReachableTime
Value of reachable time field of router advertisement sent from
the interface. A value of 0 means this router does not specifiy
the interval.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.6
agentIpv6RouterAdvertisementManagedFlag
Value of managed config field of router advertisement sent from
the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.7
agentIpv6RouterAdvertisementOtherFlag
Value of other config field of router advertisement sent from
the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.8
agentIpv6RouterAdvertisementHopLimitUnspecifiedMode
This object configures the router to send Router Advertisements
on an interface with unspecified (0) Current Hop Limit value.
This will tell the hosts on that link to ignore the Hop Limit
from this Router.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.4413.1.1.30.1.3.1.9

agentIpv6AddrPrefixTable

table
.1.3.6.1.4.1.4413.1.1.30.1.4 · 1 row entry · 6 columns
Open in standard view 
The list of IPv6 address prefixes of
IPv6 interfaces.
agentIpv6AddrPrefixEntry entry .1.3.6.1.4.1.4413.1.1.30.1.4.1
An interface entry containing objects of
a particular IPv6 address prefix.
Indexes
agentIpv6InterfaceIfIndex agentIpv6AddrPrefix agentIpv6AddrPrefixLength
Column Syntax OID
agentIpv6AddrPrefix
The prefix associated with the this interface.
IPV6-TCIpv6AddressPrefix
Textual Convention: IPV6-TCIpv6AddressPrefix OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.1
agentIpv6AddrPrefixLength
The length of the prefix (in bits).
bitsInteger32
Constraints:
range: 0-128
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.2
agentIpv6AddrPrefixOnLinkFlag
This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.3
agentIpv6AddrPrefixAutonomousFlag
Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface address).
If false(2), it is not used to autoc…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.4
agentIpv6AddrPrefixAdvPreferredLifetime
It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.

The address generated from a deprecated prefix
shoul…
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.5
agentIpv6AddrPrefixAdvValidLifetime
It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.

The address generated from an invalidated prefix
should…
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.4.1.6

agentIpv6AddrTable

table
.1.3.6.1.4.1.4413.1.1.30.1.5 · 1 row entry · 4 columns
Open in standard view 
The table of addressing information relevant to
this node's interface addresses.
agentIpv6AddrEntry entry .1.3.6.1.4.1.4413.1.1.30.1.5.1
The addressing information for one of this
node's interface addresses.
Indexes
agentIpv6InterfaceIfIndex agentIpv6AddrAddress
Column Syntax OID
agentIpv6AddrAddress
The IPv6 address to which this entry's addressing
information pertains.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.5.1.1
agentIpv6AddrPfxLength
The length of the prefix (in bits) associated with
the IPv6 address of this entry.
bitsInteger32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.4413.1.1.30.1.5.1.2
agentIpv6AddrEui64Flag
This object has the value 'true(1)', if this
address uses and eui-64 generated interface identifier and the value
'false(2)' otherwise.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.30.1.5.1.3
agentIpv6AddrStatus
Creates a new entry in the Address table.
Allowed values are:

createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The agentIpv6NetMask
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.30.1.5.1.4

agentIpv6StaticRouteTable

table
.1.3.6.1.4.1.4413.1.1.30.1.6 · 1 row entry · 6 columns
Open in standard view 
IPv6 Static Routing table. This table contains
an entry for each valid IPv6 static unicast route
that can be used for packet forwarding
determination.
agentIpv6StaticRouteEntry entry .1.3.6.1.4.1.4413.1.1.30.1.6.1
A routing entry.
Indexes
agentIpv6StaticRouteDest agentIpv6StaticRoutePfxLength agentIpv6StaticRouteIfIndex agentIpv6StaticRouteNextHop
Column Syntax OID
agentIpv6StaticRouteDest
The destination IPv6 address of this route.
This object may not take a Multicast address
value.
IPV6-TCIpv6AddressPrefix
Textual Convention: IPV6-TCIpv6AddressPrefix OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.1
agentIpv6StaticRoutePfxLength
Indicates the prefix length of the destination
address.
bitsInteger32
Constraints:
range: 0-128
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.2
agentIpv6StaticRouteIfIndex
The index value which uniquely identifies the local
interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified…
IPV6-TCIpv6IfIndexOrZero
Textual Convention: IPV6-TCIpv6IfIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.3
agentIpv6StaticRouteNextHop
The address of the next
system en route.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.4
agentIpv6StaticRoutePreference
The routing preference metric for this route. A lower
value is more preferred.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.5
agentIpv6StaticRouteStatus
Creates a new entry in the Address table.
Allowed values are:

createAndGo(4) - Creates an entry in this table.

destroy(6) - Removes the associated route from the i…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.30.1.6.1.6

agentIpv6ServicePortPrefixTable

table
.1.3.6.1.4.1.4413.1.1.30.1.7.1 · 1 row entry · 3 columns
Open in standard view 
IPv6 Service Port Prefix Table. This table contains
an entry for each valid IPv6 prefix configured on the
Service Port.
agentIpv6ServicePortPrefixEntry entry .1.3.6.1.4.1.4413.1.1.30.1.7.1.1
An IPv6 Service Port Prefix entry.
Indexes
agentIpv6ServicePortPrefixIndex
Column Syntax OID
agentIpv6ServicePortPrefixIndex
The index of the Ipv6 Prefix Address configured on the
Service Port. Removal of a row will cause index values
to be reassigned.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.7.1.1.1
agentIpv6ServicePortPrefix
The Ipv6 Prefix Address configured on the Service Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.7.1.1.2
agentIpv6ServicePortPrefixLength
The length of the IPv6 Prefix Address.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.7.1.1.3

agentIpv6ServicePortDefaultRouterTable

table
.1.3.6.1.4.1.4413.1.1.30.1.7.2 · 1 row entry · 2 columns
Open in standard view 
IPv6 Service Port Default Router Table. This table contains
an entry for each valid IPv6 Default Router configured on the
Service Port.
agentIpv6ServicePortDefaultRouterEntry entry .1.3.6.1.4.1.4413.1.1.30.1.7.2.1
An IPv6 Service Port Default Router entry.
Indexes
agentIpv6ServicePortDefaultRouterIndex
Column Syntax OID
agentIpv6ServicePortDefaultRouterIndex
The index of the IPv6 Default Router Address
configured on the Service Port. Removal of a
row will cause index values to be reassigned.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.7.2.1.1
agentIpv6ServicePortDefaultRouter
The Address of the IPv6 Default Router configured
on the Service Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.7.2.1.2

agentIpv6ServicePortNbrTable

table
.1.3.6.1.4.1.4413.1.1.30.1.7.3 · 1 row entry · 6 columns
Open in standard view 
IPv6 Service Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Service Port.
agentIpv6ServicePortNbrEntry entry .1.3.6.1.4.1.4413.1.1.30.1.7.3.1
An IPv6 Service Port Neighbor entry.
Indexes
agentIpv6ServicePortNbrAddr
Column Syntax OID
agentIpv6ServicePortNbrAddr
The Ipv6 Address of a neighbor switch visible to the Service Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.1
agentIpv6ServicePortNbrPhysAddr
The MacAddress of the neighboring switch.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.2
agentIpv6ServicePortNbrState
The state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from…
Enumeration
Enumerated Values:
1reachable
2stale
3delay
4probe
6unknown
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.3
agentIpv6ServicePortNbrUpdated
The last sysUpTime that this neighbor has been updated.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.4
agentIpv6ServicePortNbrIsRouter
Returns true(1) if the neighbor machine is a router,
false(2) otherwise.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.5
agentIpv6ServicePortNbrType
The type of the mapping.
The 'dynamic(2)' type indicates that the
IPv6 address to physical addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery protocol.
The static(3)' types indicates that …
Enumeration
Enumerated Values:
1other
2dynamic
3static
4local
 .1.3.6.1.4.1.4413.1.1.30.1.7.3.1.6

agentIpv6ServicePortNbrCfgTable

table
.1.3.6.1.4.1.4413.1.1.30.1.7.4 · 1 row entry · 3 columns
Open in standard view 
The table contains an entry for each static
IPv6 Neighbor on the Service Port.
agentIpv6ServicePortNbrCfgEntry entry .1.3.6.1.4.1.4413.1.1.30.1.7.4.1
An entry of the static IPv6 Neighbor on the Service Port.
Indexes
agentIpv6ServicePortNbrCfgAddr
Column Syntax OID
agentIpv6ServicePortNbrCfgAddr
The Ipv6 Address of a static neighbor on the Service Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.7.4.1.1
agentIpv6ServicePortNbrCfgPhysAddr
The MAC Address of a static neighbor on the Service Port.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.1.1.30.1.7.4.1.2
agentIpv6ServicePortNbrCfgEntryStatus
Create or delete the static neighbor entry on the Service Port.
The configured static neighbor entry is always active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.30.1.7.4.1.3

agentDhcp6ClientParametersTable

table
.1.3.6.1.4.1.4413.1.1.30.1.9 · 1 row entry · 12 columns
Open in standard view 
Information about the DHCPv6 Client parameters on the interfaces.
agentDhcp6ClientParametersEntry entry .1.3.6.1.4.1.4413.1.1.30.1.9.1
DHCPv6 Client information on an interface.
Indexes
agentDhcp6ClientInterfaceIndex
Column Syntax OID
agentDhcp6ClientInterfaceIndex
The Interface index on which the IPv6 address is leased by the DHCPv6 Server.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.1
agentDhcp6ClientPrefix
The IPv6 Prefix leased by the DHCPv6 Server.
IPV6-TCIpv6AddressPrefix
Textual Convention: IPV6-TCIpv6AddressPrefix OctetString
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.2
agentDhcp6ClientPrefixlength
The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.3
agentDhcp6ClientState
The State of the DHCPv6 Client on this interface.
Enumeration
Enumerated Values:
0inactive
1solicit
2request
3active
4renew
5rebind
6release
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.4
agentDhcp6ClientServerDUID
The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.5
agentDhcp6ClientT1Time
The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval
after which the address is requested for renewal.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.6
agentDhcp6ClientT2Time
The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval
after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.7
agentDhcp6ClientIAID
An identifier for an identity association chosen by this Client.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.8
agentDhcp6ClientPreferredLifeTime
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.9
agentDhcp6ClientValidLifeTime
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.10
agentDhcp6ClientRenewTime
The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.11
agentDhcp6ClientExpireTime
The time (in seconds) when the DHCPv6 leased address expires.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.9.1.12

agentIpv6EcmpCountTable

table
.1.3.6.1.4.1.4413.1.1.30.1.11 · 1 row entry · 2 columns
Open in standard view 
A count of the number of routes with each number of ECMP next hops. 
A walk of this table only returns the entries with a non-zero value 
for agentIpv6EcmpRouteCount.
agentIpv6EcmpCountEntry entry .1.3.6.1.4.1.4413.1.1.30.1.11.1
Number of IPv6 routes with a given number of next hops.
Indexes
agentIpv6EcmpNextHopCount
Column Syntax OID
agentIpv6EcmpNextHopCount
The number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform.
Unsigned32
Constraints:
range: 0-128
 .1.3.6.1.4.1.4413.1.1.30.1.11.1.1
agentIpv6EcmpRouteCount
The number of IPv6 routes with agentIpv6EcmpNextHopCount next hops.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4413.1.1.30.1.11.1.2

agentIpv6NetworkPortNbrTable

table
.1.3.6.1.4.1.4413.1.1.30.1.12.1 · 1 row entry · 6 columns
Open in standard view 
IPv6 Network Port Neighbor Table. This table contains
an entry for each valid IPv6 Neighbor configured on the
Network Port.
agentIpv6NetworkPortNbrEntry entry .1.3.6.1.4.1.4413.1.1.30.1.12.1.1
An IPv6 Network Port Neighbor entry.
Indexes
agentIpv6NetworkPortNbrAddr
Column Syntax OID
agentIpv6NetworkPortNbrAddr
The Ipv6 Address of a neighbor switch visible to the Network Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.1
agentIpv6NetworkPortNbrPhysAddr
The MacAddress of the neighboring switch.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.2
agentIpv6NetworkPortNbrState
The state of the neighboring switch:
reachable(1) - The neighbor is reachable by this switch.
stale(2) - Information about the neighbor is scheduled for deletion.
delay(3) - No information has been received from…
Enumeration
Enumerated Values:
1reachable
2stale
3delay
4probe
6unknown
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.3
agentIpv6NetworkPortNbrUpdated
The last sysUpTime that this neighbor has been updated.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.4
agentIpv6NetworkPortNbrIsRouter
Returns true(1) if the neighbor machine is a router,
false(2) otherwise.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.5
agentIpv6NetworkPortNbrType
The type of the mapping.
The 'dynamic(2)' type indicates that the
IPv6 address to physical addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery protocol.
The static(3)' types indicates that …
Enumeration
Enumerated Values:
1other
2dynamic
3static
4local
 .1.3.6.1.4.1.4413.1.1.30.1.12.1.1.6

agentIpv6NetworkPortNbrCfgTable

table
.1.3.6.1.4.1.4413.1.1.30.1.12.2 · 1 row entry · 3 columns
Open in standard view 
The table contains an entry for each static
IPv6 Neighbor on the Network Port.
agentIpv6NetworkPortNbrCfgEntry entry .1.3.6.1.4.1.4413.1.1.30.1.12.2.1
An entry of the static IPv6 Neighbor on the Network Port.
Indexes
agentIpv6NetworkPortNbrCfgAddr
Column Syntax OID
agentIpv6NetworkPortNbrCfgAddr
The Ipv6 Address of a static neighbor on the Network Port.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.12.2.1.1
agentIpv6NetworkPortNbrCfgPhysAddr
The MAC Address of a static neighbor on the Network Port.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.1.1.30.1.12.2.1.2
agentIpv6NetworkPortNbrCfgEntryStatus
Create or delete the static neighbor entry on the Network Port.
The configured static neighbor entry is always active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.30.1.12.2.1.3

agentIpv6NbrCfgTable

table
.1.3.6.1.4.1.4413.1.1.30.1.13 · 1 row entry · 4 columns
Open in standard view 
The table contains an entry for each static
IPv6 Neighbor on the Network Port.
agentIpv6NbrCfgEntry entry .1.3.6.1.4.1.4413.1.1.30.1.13.1
An entry of the static IPv6 Neighbor on the Network Port.
Indexes
agentIpv6IfIndex agentIpv6NbrCfgAddr
Column Syntax OID
agentIpv6IfIndex
A unique non-zero value identifying
the particular IPv6 interface.
IPV6-TCIpv6IfIndex
Textual Convention: IPV6-TCIpv6IfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.4413.1.1.30.1.13.1.1
agentIpv6NbrCfgAddr
The Ipv6 Address of a static neighbor on the Routing or Host interface.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.4413.1.1.30.1.13.1.2
agentIpv6NbrCfgPhysAddr
The MAC Address of a static neighbor on the Routing or Host interface.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.4413.1.1.30.1.13.1.3
agentIpv6NbrCfgEntryStatus
Create or delete the static neighbor entry on the Routing or Host interface.
The configured static neighbor entry is always active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4413.1.1.30.1.13.1.4